Philips NPX730/INT - Manuals

Overview 5 Power supply Use only a power adapter which is certified for this product (see Technical data, page 18 ). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product.The...

6 Philips · NeoPix 730 Front view c a b a Projection lens b Front IR sensor c Angle adjustment knob Turn the knob to adjust screen height. Rear view USB USB-C HDMI TM 1 HDMI TM 2 b c e d g f a a • Switch the projector on or to standby mode. • When the projector is on, the LED lights up in white. • W...

Initial setup 7 a Display all the input sources and allow you to switch to a different one. b OK Confirm a selection. c Open or close the settings menu. d Access the home screen. e / Increase or decrease the volume. f Start, pause or resume media playback . g / Skip to the previous or next media fil...

8 Philips · NeoPix 730 Front Ceiling 1 Mount the projector on the ceiling with upside up in front of the projection screen. A projector mount is required to mount the projector on ceiling. 2 If the projection direction is incorrect, press on the remote control to open the settings menu, go to Projec...

Initial setup 9 Prepare the remote control CAUTION! The improper use of batteries can lead to overheating, explosion, risk of fire and injury. Leaking batteries can possibly damage the remote control.Never expose the remote control to direct sunlight.Avoid deforming, dismantling or charging the batt...

10 Philips · NeoPix 730 Screen height adjustment To adjust the screen height when placing the projector on a flat surface, turn the angle adjustment knob located at the bottom of the projector. Image shape adjustment V/H Keystone You can manually make the image rectangular by adjusting the horizonta...

Connect to other devices 11 Connect to a device through HDMI™ ARC The HDMI™ 1 port on the projector supports Audio Return Channel (ARC). You can connect a compatible audio system (e.g. a home cinema system, AV receiver or sound bar) to the projector through HDMI™ ARC connection. With this connection...

12 Philips · NeoPix 730 Connect to wired speakers or headphones You can connect wired speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones. • The internal speakers of the projector are deactivated automatically ...

14 Philips · NeoPix 730 Image settings You can view and change the following image settings. • Location : You can select a location and then modify the image settings. All the modified image settings will be associated with the selected (current) location. You can create up to 3 different sets of im...

Maintenance 15 6 Maintenance Cleaning DANGER! Follow the following instructions when cleaning the projector : Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector. Do...

16 Philips · NeoPix 730 7 Troubleshooting Power cycling If a problem occurs and you cannot resolve it using the instructions in this user manual, try the following steps to resolve the problem.1 Turn the projector off by pressing twice. 2 Wait at least 10 seconds.3 Turn the projector on by pressing ...

18 Philips · NeoPix 730 8 Appendixes Technical data Technology/optical Display technology ...............................................LCDLight source ........................................... single LED WLumens ...................................................................... 700Resolution...

Appendixes 19 CE statement • The product shall only be connected to a USB interface of version USB 2.0 or higher. • Adapter shall be installed near the equipment and shall be easily accessible. • The operating temperature of the EUT can’t exceed 35°C and shouldn’t be lower than 5°C. • The plug is co...