Philips MCM302/05 - Manuals

6 Notice Any changes or modifi cations made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community.This product complies with the requ...

8 What’s in the box Check and identify the contents of your package: Main unit • Loudspeaker boxes x 2 • Power cord • Remote control with batter y • FM wire antenna • 2 Your Micro Hi- Fi System Congratulations on your purchase, and welcome to Philips! To fully benefi t from the suppor t that Philips ...

9 Overview of the main unit o n p a b c d e k m f h g i j l English EN

12 Connect FM antenna Tip For optimal reception, fully extend and adjust the • position of the antenna.For better FM stereo reception, connect an outdoor • FM antenna to the FM AERIAL jack. The unit does not suppor t MW radio reception. • 1 Connect the supplied FM antenna to the FM AERIAL jack on th...

13 Note Before you press any function button on the remote • control, fi rst select the correct source with the remote control instead of the main unit.If you are not going to use the remote control for a • long time, remove the batter y. Set clock 1 In the standby mode, press and hold CLOCK to activ...

15 5 Press / to select a fi le. 6 Press to star t play. 4 Play disc/USB Play from disc 1 Press CD to select the CD source. 2 Press OPEN/CLOSE . The disc tray opens. » 3 Place a disc onto the tray and press OPEN/CLOSE . Ensure that the label is facing upwards. » 4 Play star ts automatically. If play d...

16 The track number and total remaining » play time For MP3 disc: 1 Press DISPLAY to display ID3 information (if available). Repeat play 1 During play, press REPEAT/ST. repeatedly to select: » [REPEAT] (repeat): play the current track repeatedly. » [REPEAT ALL] (repeat all): play all tracks repeated...

18 1 During play, press LOUD to enable/disable automatic loudness control. Mute sound 1 During play, press MUTE to mute/unmute sound. 6 Adjust volume level and sound effect Note You cannot use the DSC, DBB and Loudness features • at the same time. Adjust volume level 1 During play, press VOL +/- to ...

19 Program radio stations manually Note You can program a maximum of 20 preset radio • stations. 1 Tune to a radio station. 2 Press PROG to activate programming. 3 Press PRESET/ALBUM +/- to allocate a number from 1 to 20 to this radio station, then press PROG to confi rm. The preset number and the fr...

20 When automatic programming is used, RDS stations are programmed fi rst. 1 Tune to a RDS station. 2 Press RDS repeatedly to scroll through the following information (if available): Station name » Program type such as » [NEWS] (news(, [SPORT] (spor t), [POP M] (pop music). .. Frequency » Note See • ...

21 Connect other devices Caution Before you connect other devices to the unit, ensure • that the AC power is unplugged. Note If the device only provides a mono jack, connect it to • the left jack on the unit. Alternatively, you can also use a “single to double” cinch cable. Listen to other devices Y...

22 Tuner (FM) Tuning Range 87.5 - 108MHz Tuning grid 50KHz Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio <22 dBf>43 dBf Search Selectivity >28dBf Total Harmonic Distor tion <3% Signal to Noise Ratio >55dB Speakers Speaker Impedance 4ohmSpeaker Driver 4” Sensitivity >8...

24 Reduce the distance between the remote • control and the unit.Inser t the batter y with its polarities (+/– • signs) aligned as indicated.Replace the batter y. • Aim the remote control directly at the • sensor on the front of the unit. No disc detected Inser t a disc. • Check if the disc is inser...