Philips MCM1120 - Manuals

Philips MCM1120 Sound System – Manual in PDF format online.

Manuals:

Manual

Manual Philips MCM1120

Summary

Page 3 - Contents

1 EN Contents 1 Important 2 Safety 2 2 Your micro system 4 Introduction 4 What's in the box 4 Over view of the main unit 5 Over view of the remote control 6 3 Get started 7 Connect speakers 7 Connect power 8 Prepare the remote control 8 Turn on 8 Set clock 9 4 Play 9 Basic play operations 9 Play dis...

Page 4 - Important; Safety; Important Safety Instructions

2 EN 1 Important Safety This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of ever yone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed...

Page 5 - Hearing safety

3 EN • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning • Never remove the casing of this apparatus. • Never lubricate any par t of this apparatus. • Never place this apparatus on other electrical equipment. •...

Page 6 - Introduction

4 EN 2 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, USB storage devices, tapes, and other external ...

Page 7 - Overview of the main unit

5 EN Overview of the main unit a • Turn on the main unit • Switch to standby mode b SOURCE • Select a source. c STOP • Stop play or erase a program. d PLAY/PAUSE • Star t or pause play. a b c f e d g h i k l m n j e / PREVIOUS/NEXT • Skip to the previous/next track. • Fast reverse or fast forward wi...

Page 8 - Overview of the remote

6 EN h • Connect to a headphone. i • Open/close the disc compar tment. j Display panel • Show current status. k MODE • Select repeat play mode in CD, or USB source. • Select shuffle play mode in CD, or USB source. l CLOCK • Set clock. m ALBUM/PRESET+/- • Select a preset radio station. • Skip to the ...

Page 9 - Get started; Connect speakers

7 EN g ALB/PRESET -/+ • Skip to the previous/next album. • Select a preset radio station. h MUTE • Mute volume. i DSC • Select a preset sound setting: POP, JAZZ, ROCK, or CLASSIC. j TIMER • Set the alarm timer. k • Turn on the main unit. • Switch to standby mode. l DIMMER • Access illuminate dimmer ...

Page 10 - Connect power; Prepare the remote control; Turn on; Switch to standby mode

8 EN 3 Release the socket flap. Connect power Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. • Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never p...

Page 11 - Set clock; Basic play operations; Play discs

9 EN Note • When the unit remains idle for 15 minutes, it switches from standby mode automatically. Set clock 1 In standby mode, press and hold CLOCK on the remote control for more than two seconds. » [24H] or [12H] hour format is displayed. 2 Press / to select [24H] or [12H] hour format. 3 press CL...

Page 12 - Play from USB; Adjust sound; Program audio tracks

10 EN Tip • If your main unit does not star t to play, press / to select a track and then press . Play from USB Note • Make sure that the USB storage device contains playable audio contents for suppor ted formats. 1 Inser t a USB storage device into the socket on the main unit. 2 Press USB to select...

Page 13 - Listen to tape; Play a tape; Record from CD to tape

11 EN 4 Press / to select a track number, then press PROG to confirm. 5 Repeat steps 3 and 4 to program more tracks. 6 Press to play the programmed tracks. » During play, [PROG] (program) is displayed. » To erase the program, press when play is stopped. Listen to tape Note • When you play or record ...

Page 14 - Record from radio to tape; Listen to radio; Tune to FM radio stations; Program radio stations

12 EN 5 Load a tape with the open side downward and the full spool to the left, and close the tape door. 6 Press to star t recording. » Disc play star ts automatically from the beginning of the disc or the selected section. • To pause or resume recording, press . • To stop recording, press . Record ...

Page 15 - Show RDS information; Synchronize clock with RDS

13 EN Program radio stations manually Note • You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press PROG to activate programming mode. 3 Press ALB/PRESET+/- to select a number from 1 to 20 for this radio station, then press PROG to confirm. » The preset number and ...

Page 16 - Other features; Set alarm timer; Activate/deactivate alarm timer; Set sleep timer

14 EN 6 Other features Set alarm timer This unit can be used as an alarm clock. You can select DISC, USB, or FM TUNER as alarm source. Note • Make sure that you have set the time correctly. 1 In standby mode, press and hold TIMER until [TIMER SET] (timer set) scrolls on the display. » [SELECT SOURCE...

Page 17 - Amplifier; Speakers; Tuner; USB playability information

15 EN 7 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 5 W RMS Frequency Response 60 Hz - 16 kHz, ±3 dB Signal to Noise Ratio >65 dB Aux Input 0.5 V RMS 20 kohm Speakers Speaker Impedance 4 ohm Speaker Driv...

Page 19 - Troubleshooting

17 EN 8 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips ...

Page 20 - Notice

18 EN 9 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused...