Philips BTM2360/12 - Manuals

4 EN 2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips.com/suppor t. Introduction With this unit, you can: • enjoy audio from discs, USB devices, Bluetooth devices, and othe...

7 EN 3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect speakers Note • Inser t the stripped por tion of each s...

8 EN Demonstrate the features In standby mode, press to demonstrate features of this device. » The features are displayed one by one across the display panel. • To turn off the demonstration, press again. Power on Press . » The product switches to the last selected source. Switch to standby mode Pre...

9 EN Select a source On the main music system Press SOURCE repeatedly to select a source. • [DISC] : the disc in the disc compar tment • [USB] : .mp3 files stored on the connected USB storage device • [TUNER] : the FM tuner • [AUDIO IN] : the audio input through the AUDIO IN socket • [BT] : audio on...

10 EN 4 Play Play from disc 1 Press CD to select CD source. 2 Press to open the disc compar tment. 3 Inser t a disc with the label side up. 4 Press to close the disc compar tment. » Play star ts automatically. If not, press . Play from USB Note • Make sure that the USB device contains playable audio...

11 EN Skip tracks When playing a CD: Press / to select tracks. When playing an MP3 disc and USB: 1 Press / to select an album or a folder. 2 Press / to select a track or a file. Program tracks This function allows you to program 20 tracks in the desired sequence. 1 In stop mode, press PROG to activa...

12 EN Tip • The product can memorize up to 8 previously connected Bluetooth devices. To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device; or • Move the device beyond the communication range. Enter Bluetooth pairing mode Press and hold SOURCE / PAIRING for three seconds ...

14 EN 6 Adjust sound The following operations are applicable to all suppor ted media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC1 , DSC2 , DSC3 , DSC4 , and DSC5 Adjust volume level • On the remote control, press VOL +/- repeatedly. • On the main uni...

15 EN 7 Other features Set the alarm timer This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Note • Make sure that you have set the clock correctly. • If the selected alarm source is unavailable, this product switches to F...

16 EN Charge your devices With this micro music system, you can charge your external devices, such as your cell phone, MP3 player or other mobile devices. 1 Use a USB cable to connect the USB socket of product with the USB socket of your devices. 2 Connect the product to power. » Once the device is ...

17 EN 8 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Total Output Power Maximum 70W Frequency Response 60 Hz - 20 kHz; ±3 dB Signal to Noise Ratio ≥ 75 dBA Total Harmonic Distor tion < 1% Aux Input 600 mV ± 100 mV RMS 22kohm Sp...

18 EN USB playability information Compatible USB devices: • USB flash memor y (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.1) • memor y cards (requires an additional card reader to work with this unit) Supported USB formats: • USB or memor y file format: FAT12, FAT16, FAT32 (sector size: 5...

19 EN 9 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips ...