Peerless SF 16D - Manuals - manualsarea.com

Page 2 - Tools Needed for Assembly; Table of Contents; WARNING

2 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Note: Read entire instruction sheet before you start installation and assembly. Tools Needed for Assembly • stud finder ("edge to edge" stud finder is recommended) • drill • 1/4" bit for concrete and cinder block wall • 1/2" bit for metal s...

Page 3 - Parts List

3 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 CC DD De scription Qty. Pa rt # AA wall plate 1 200-1797 BB interface plate 1 200-0860 CC #14 x 2.5" wood screw 4 5S1-015-C03 DD Alligator® anchor 4 590-0097 EE M10 x 1.5 x 15 mm socket head screw 4 520-9262 FF 4 mm security allen wrench 1 560-1146 Par...

Page 4 - Installation to Single Wood Stud Wall; AA; CC

4 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Installation to Single Wood Stud Wall 1 Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Basedon its edges, draw a vertical line down the stud’s center. Place wall plate ( AA ) on wall as a templa...

Page 5 - Installation to Double Wood Stud Wall

5 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Installation to Double Wood Stud Wall 1 Wall plate ( AA ) can be mounted to two studs that are 16" apart. Use a stud finder to locate the edges of the studs. Use of an edge-to-edge stud finder is highly recommended. Based on their edges, draw a vertica...

Page 6 - Installation to Solid Concrete or Cinder Block

6 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Installation to Solid Concrete or Cinder Block 1 Make sure that wall plate ( AA ) is level, use it as a template to mark four mounting holes. The topmounting hole should be 2.5" above the desiredscreen center as shown in figure 1.1 on page 4. Drillfour...

Page 7 - BB; Installing Interface Bracket to PLP Adapter Plate; EE

7 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 To prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Placescreen face side down. Attach the interface bracket ( BB ) to the PLP adapter plate (sold separately) using four M10 x 15 mm socket head...

Page 8 - Installing Interface Bracket to LC Adapter Plate

8 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 To prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Placescreen face side down. Attach the interface bracket ( BB ) to the LC adapter plate (sold separately) using four M5 screws provided with ...

Page 9 - Mounting and Removing Flat Panel Screen; FF; DETAIL 1

9 of 9 ISSUED: 08-02-05 SHEET #: 202-9010-1 Mounting and Removing Flat Panel Screen Note: Security screw may need to be loosened to avoid interference with wall plate. Hook interface bracket ( BB ) onto wall plate ( AA ). Then slowly swing screen in as shown. Turn security screw, using security alle...