Peerless DS-VW760 - Manuals

Page 2 - WARNING; Accessories

2 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 Table of Contents Horizontal and Vertical Video Wall Mount Assembly Formula ................................................................................................3Parts List..................................................................

Page 3 - Vertical Spacing Location

3 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 Accessories • DS-ACC760 Cable Release Kit • DS-VWS0## Wall Plate Spacer Kit If DS-VWS0## Wall Plate Spacer Kit is not available use diagram below to determine vertical spacing. If DS-VWS0## Wall Plate Spacer Kit is not available use diagram below...

Page 4 - Parts List

4 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 Open video wall mount assembly by releasing locking tab. Pull or push up on locking tab. A 1 B C D E F G H I J K Parts List Description Qty. Part # A pull out mount assembly 1 145 ‐ 1104 B adapter bracket 2 145 ‐ 1105 C lock bracket ...

Page 5 - Removing Display Carriage

5 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 Remove display carriage by removing clip, pull release pin, and screws as shown. Remove screws using 4 mm allen wrench ( K ). 2 Removing Display Carriage LOCKING TAB LOCKING TAB VIDEO WALL MOUNT ASSEMBLY DISPLAY CARRIAGE VIDEO WALL MOUNT ASSEMBLY...

Page 6 - E G; Installation to Wall Stud

E G Installation to Wall Stud Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Based on their edges, draw a vertical line down the stud center. Place video wall mount assembly on wall as a template. Level plate, and mark the center of the f...

Page 7 - Installation to Solid Concrete or Cinder Block

E F G solid concrete cinder block VIDEO WALL MOUNT ASSEMBLY Installation to Solid Concrete or Cinder Block • When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" (35 mm) of actual concrete thickness in the hole to be used for the concrete anchors. Do not...

Page 8 - Re-Attaching Display Carriage; I or J; Attaching Adapter Brackets to Display

8 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 Secure display carriage by pulling release pin, fastening clevis pin, clip, four screws, and spacer as shown. NOTE: make sure that spacer is in-between display carriage and video wall mount assembly. Re-Attaching Display Carriage 4 VIDEO WALL MOU...

Page 9 - Attaching Adapter Brackets to Display Carriage; FRONT; DETAIL 1

9 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 B B B B 6 600 mm 400 mm 300 mm 200 mm PLP SECURITY SCREW Attach adapter brackets ( B ) to display carriage. Slide adapter brackets ( B ) to position based on hole pattern as shown below. Loosely fasten in place using security screw as shown in de...

Page 10 - Turn knob; Display Carriage Adjustment

10 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 Use legend below to determine position of display. NOTE: Each knob can be adjusted independently for fine tuning adjustments. 7 Turn knob CLOCKWISE to tighten Turn knob COUNTER - CLOCKWISE to loosen UP ROTATE LEFT ROTATE RIGHT DOWN Display Carri...

Page 11 - Adapter Bracket Adjustment

11 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 Turn knob CLOCKWISE to tighten Turn knob COUNTER - CLOCKWISE to loosen UP ROTATE LEFT TOP TOP TOP TOP TOP TOP Use legend below to determine position of display. NOTE: Each knob can be adjusted independently for fine tuning adjustments. 8 Turn kn...

Page 12 - Cable Management

12 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 9 TILT FOWARD TILT LEFT DISPLAY CABLES VIDEO WALL MOUNT ASSEMBLY CABLE THROUGH TOP CABLE THROUGH BOTTOM DISPLAY Display cables can be routed through top or bottom of video wall mount assembly. NOTE: Use mesh sleeve ( M ) and cable ties ( L ) for...

Page 14 - Optional

14 of 14 ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10 11 Secure locking tab using two socket pin screws ( D ) as shown below. Lock bracket ( C ) and lock (not supplied) can be used to secure display carriage to video wall mount assembly as shown in below. C C LOCKING TAB D LOCK(NOT SUPPLIED) VIDEO ...