Peerless DS-VW660 - Manuals

6 of 10 ISSUED: 01-05-10 SHEET #: 125-9128-1 06-28-10 E F solid concrete cinder block Installation to Solid Concrete or Cinder Block • When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" (35 mm) of actual concrete thickness in the hole to be used for th...

7 of 10 ISSUED: 01-05-10 SHEET #: 125-9128-1 06-28-10 Attach adapter brackets ( C ) to back of display using four M6 x 12 mm phillips screws ( I ) with nylon shoulder washer ( G ), or four M8 x 15 mm phillips screws ( J ) as shown below. NOTE: Hardware to attach dedicated plates to the mount are inc...

8 of 10 ISSUED: 01-05-10 SHEET #: 125-9128-1 06-28-10 C 600 mm 400 mm 300 mm 200 mm FRONT OUTSIDE EDGE OF ADAPTER BRACKET DETAIL 1 Horizontal Display Position OPTIONAL GUIDE: When positioning adapter brackets ( C ) make sure outside edge of adapter bracket is in notch on display carriage as shown in...

9 of 10 ISSUED: 01-05-10 SHEET #: 125-9128-1 06-28-10 Horizontal Display Adjustment Secure Carriage Assembly ( A ) to wall plate ( B ) with two M5 x 10 mm socket pin serrated washer head screws ( H ) using 4 mm allen wrench ( L ) as shown below. H B A Adapter Brackets ( C ) and display can be adjust...

10 of 10 ISSUED: 01-05-10 SHEET #: 125-9128-1 06-28-10 © 2010, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners. UP ROLL LEFT ROLL RIGHT DOWN Use legend below to determine position of display. NOTE: Ea...