Paradyne EAM2000-12 - Manuals

Paradyne EAM2000-12 – Manual in PDF format online.

Manuals:

Manual Paradyne EAM2000-12

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - E1 RJ21 Connector Port Pinout; OVERVIEW; Accessing EAM2000-12 data in a newly installed IP DSLAM; MUM installed in your IP DSLAM.; NOTE

210-0000036 rev03 3. Connect the E1 Line(s). Plug the E1 cable into the RJ21 connector for the chosen slot on the back of the IP DSLAM. The EAM2000-12 will connect with remote E1 modems at distances up to 6,000 feet before requiring an E1 repeater. For each port being connected to a remote E1 modem,...

Page 3 - superuser / Password; Accessing EAM2000-12 data in a previously installed IP DSLAM; illuminated, indicating the connection has been established.; Default Settings; Management Password Administration Defaults*

210-0000036 rev03 ! 192.168.254.252 if the MUM is in slot 13 (IPD12000) or slot 5 (IPD4000) ! 192.168.254.253 if the MUM is in slot 14 (IPD12000) e. Log in with a default username and password (both of which are case sensitive). Please note that General Users have "read only" access; for NMS...

Page 4 - Management System Configuration Defaults; Data Storage

210-0000036 rev03 Management System Configuration Defaults EAM2000-12 Circuit Defaults Data Storage Configuration backup is inherent in the EAM2000-12. Upon initial power up of the IP DSLAM, the default parameters of the EAM2000-12 will remain in place unless changed through NMS. Once changed, new c...

Paradyne Manuals