ParaBody 881 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody 881 LEG PRESS ADAPTER KIT. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * 9/16” wre...

Page 4 - PARTS LIST; SYSTEM without SECOND STACK OPTION , please refer to PAGE 5.

PARTS LIST 4 PART # 7 1 6 0 0 0 8 7 1 5 6 0 0 1 7 1 5 6 1 0 2 311 6 2 0 1 3 1 0 2 5 0 1 3 1 0 2 8 0 2 3 1 0 2 9 2 4 3 1 0 2 9 2 2 3 1 0 2 9 0 5 3 1 0 2 9 3 5 KEY 1 2 3 4 5 6 7 8 9 1 0 QTY 1 1 1 9 7 8 4 2 3 5 PART # 6 5 3 3 5 0 1 3 1 0 2 8 0 7 6 1 2 2 7 0 1 6 4 8 0 3 0 1 7 2 4 2 4 0 8 7 2 4 5 0 0 8 6...

Page 5 - FIGURE 1

STEP 1: FIGURE 1 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • REMOVE the LAT CABLE, THREADED HOUSING, 3/8 X 3-3/4” BOLT, two 3/8 X 1” SPACERS and one 3/8” LOCK NUT from the 880 GYM SYSTEM. See FIGURE 1. Save the LAT CABLE if you ever plan to purchase the SECOND STACK OPTION.Discard the 3/8 X 1” SPACERS. ...

Page 8 - FIGURE 6

STEP 6: FIGURE 6 • Route the SHORT LEG CABLE (2) through the FRAME and BOOM BRACKET as shown in FIGURE 4. (NOTE: Remove pulleys for ease of installation.) 8 FRAME BOOM BRACKET 2 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2

Page 9 - FIGURE 7

STEP 7: FIGURE 7 • Route the SHORT LEG PRESS CABLE (2) through the PULLEY PLATES as shown in FIGURE 7. 3/8 X 1-3/4” 7 • Route the SHORT LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and assemble the PULLEY to the PULLEY BRACKET (15) using one 3/8 X 1-3/4” BOLT (7) and one previously removed 3/8” ...

Page 10 - FIGURE 8; FIGURE 9

STEP 8: FIGURE 8 • Remove the 3-1/2” PULLEY, one 3/8 X 3-3/4” BOLT, two 3/8 X 1” SPACERS and one 3/8” LOCK NUT from the BASE PLATES as shown in FIGURE 8. Discard one of the 3/8 X 1” SPACERS. 3/8 X 3-3/4” 2 BASE PLATES 1 0 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 9: FIGURE 9 • SECURELY assemble the...

Page 16 - CABLE ROUTING DIAGRAM

FIGURE 19 STEP 19: 3/8 X 4-1/2” 10 2 1 2 1 3 SEAT FRAME 1 4 1 6 • SECURELY assemble the threaded end of the SHORT LEG PRESS CABLE (2) to the SEAT FRAME using one 3/8 X 4-1/2” BOLT (10), two 3/8 X 1” SPACERS (13), one previosly removed THREADED HOUSING, two 3/8” FLANGE SPACERS (14)and one 3/8”LOW HEI...

Page 17 - THIS CONCLUDES THE ASSEMBLY OF THE 880 LEG PRESS ADAPTER KIT

FIGURE 20 STEP 20: • To set the correct amount of tension in the cables, push the HEAD PLATE down, insert the WEIGHT SELECTOR PIN and perform several repititions at the leg press station.This will relax the cable system and prevent the HEAD PLATE from lifting up. THIS CONCLUDES THE ASSEMBLY OF THE 8...

Page 19 - FIGURE 2

STEP 2: FIGURE 2 1 9 • Route the LONG LEG PRESS CABLE (3) around the 3-1/2” PULLEY on the PULLEY PLATES using one existing 3/8 X 1-3/4” BOLT and one existing 3/8” LOCK NUT. See FIGURE 2. STACK BASE PULLEY PLATES • Assemble the LONG LEG PRESS CABLE (3) to the PEDESTAL and route the LONG LEG PRESS CAB...

Page 20 - FIGURE 3; FIGURE 4

2 0 STEP 3: FIGURE 3 • Remove the two 3/8” BOLTS, 3/8” WASHERS and 3/8” LOCK NUTS from the STACK BASE as shown in FIGURE 3. STACK BASE • SECURELY assemble the LEG PRESS ADAPTER (1) to the STACK BASE using the previously removed 3/8” BOLTS, 3/8” WASHERS and 3/8” LOCK NUTS as shown in FIGURE 3. 3/8” L...

Page 21 - FIGURE 5

2 1 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 5 STEP 5: • Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2” PULLEY (4) to the BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (7), one 3/8” WASHER (5), one CABLE CLIP (11)and one ...