ParaBody 221 - Manual - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody 221 Leg Press Adapter Kit. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * 9/16” wre...

Page 5 - PARTS LIST; FIGURE 1

PARTS LIST 5 PART # 7 0 3 0 9 7 0 1 4 2 0 2 311 6 2 0 1 6 4 6 7 0 0 1 3 1 0 8 1 0 2 KEY 1 2 3 4 5 QTY 1 1 1 2 1 PART # 3 1 0 2 5 0 1 3 1 0 2 8 0 2 3 1 0 2 9 2 4 3 1 0 2 9 0 4 3 1 0 2 9 0 6 DESCRIPTION 3/8” WASHER 3/8” LOCKNUT 3/8 X 1-3/4” BOLT 3/8 X 3” BOLT 3/8 X 4” BOLT QTY 7 4 1 2 2 DESCRIPTION FR...

Page 6 - FIGURE 2

6 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Slide two 2” COVER CAPS (4) over the FRONT LEG (1) as shown in FIGURE 2 FIGURE 2 STEP 2: • SECURELY assemble the FRONT LEG (1) to the 220 Gym System using two 3/8 X 4” BOLTS (10), one previously removed 3/8” WASHER, three 3/8” WASHERS (6), one previously rem...

Page 7 - FIGURE 3

FIGURE 3 STEP 3: • Assemble the new LEG CABLE (2) using the previously removed bolts as shown in FIGURE 3. (NOTE: Make sure the LEG CABLE is running in the grooves of all pulleys and above the retaining bolts.) 7 2

Page 8 - FIGURE 4

FIGURE 4 STEP 4: 8 1 7 3 • SECURELY assemble one 3-1/2” PULLEY (3) to the FRONT LEG (1) using one 3/8 X 1-3/4” BOLT (8) and one 3/8” LOCK NUT (7). See FIGURE 4. 2 3/8 X 1-3/4” 8 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2

Page 9 - FIGURE 5

FIGURE 5 STEP 5: 9 • Route LEG CABLE (2) around the 3-1/2” PULLEY on the LEG PRESS as shown in FIGURE 5. (NOTE: Pulley may need to be temporarily removed.) • SECURELY attach the 100 LEG PRESS to the FRONT LEG (1) using two 3/8” X 3” BOLTS (9), four 3/8” WASHERS (6), and two 3/8” LOCK NUTS (7). See F...

Page 10 - FIGURE 6; THIS CONCLUDES THE ASSEMBLY OF THE 221 LEG PRESS ADAPTER KIT

FIGURE 6 STEP 6: • The 100 LEG PRESS is equipped with a spring pin adjustment to accommodate different sized users and allow easy entry and exit from the machine. To use, you must slightly push against the foot plates to take tension off the pin. • Before setting the correct amount of tension in the...

Page 12 - LIMITED WARRANTY

1 2 NOTES: LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired ...

ParaBody 221 - Manual

Table of Contents:

Summary

Other ParaBody Models