ParaBody 777 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody 777 Gym System. Please read these instructions thoroughly and keep them for future reference. * Rubber mallet or hammer* 3/4” wrench* 9/16” wrench* Ratchet with 3/4” and 9/16” sockets* 5/32” Allen wrench...

Page 5 - PARTS LIST

3 PARTS LIST 5 PAR T # 7 0 0 7 7 7 0 0 7 6 7 0 0 5 8 7 0 0 1 4 7 0 0 1 5 7 0 0 1 7 7 0 0 1 9 7 0 0 5 6 7 0 0 6 7 6 9 4 0 8 6 9 8 8 5 6 9 9 5 4 6 9 9 5 7 7 1 5 5 2 7 1 5 5 3 6 9 9 4 7 6 1 9 4 6 0 1 6 8 1 6 5 0 1 7 0 1 6 9 0 2 7 0 1 6 9 0 1 6 9 3 9 2 0 2 6 3 8 2 3 0 1 6 9 5 3 7 3 2 2 1 7 0 2 6 9 7 8 1...

Page 6 - FIGURE 1

FIGURE 1 6 STEP 1: • LOOSELY assemble two BASE PLATES (11) to the BASE (1) and the UPRIGHT (2) using four 3/8 X 3-3/4” BOLTS (57) and four 3/8” LOCK NUTS (63). See FIGURE 1. 2 6 3 1 11 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 57 3/8 X 3-3/4” 4 8 6 6 3/8 X 3” 67 6 3 • Insert two two 3/8 X 9/16” FLANGE S...

Page 8 - FIGURE 4

FIGURE 4 STEP 4: 8 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Insert two GUIDE RODS (18) into the BASE (1) as shown on FIGURE 4. (NOTE: If the 777 SHROUD OPTION was pur- chased, place the GUIDE RODS (18) through the BOTTOM SHROUD BRACKET (found in SHROUD OPTION box) andinto the BASE (1) as shown in FIG...

Page 9 - FIGURE 6

9 STEP 5: • Swing the GUIDE RODS (18) into the guide rod bushings in each of the RIGHT and LEFT BOOM PLATES (14 & 15) as shown in FIGURE 5. • LOOSELY assemble the RIGHT and LEFT BOOM PLATES (14 & 15) to the UPRIGHT (2) using three 3/8 X 3-3/4” BOLTS (57) and three 3/8” LOCK NUTS (63). See FI...

Page 10 - FIGURE 8

1 0 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 STEP 7: STEP 8: • SECURELY assemble one SEAT PAD (16) to the SEAT ADJUST (3) using two 3/8 X 2-3/4” BOLTS (55) and two 3/8” WASHERS (64). See FIGURE 8. FIGURE 8 FIGURE 7 • LOOSELY assemble the RIGHT and LEFT ARMS (6 & 7) to the UPRIGHT (2) and the RIGHT ...

Page 11 - FIGURE 9

11 FIGURE 9 STEP 9: 4 0 2 3 4 3 4 2 • Securely assemble one SPRING PIN ASSEMBLY (40) and one 3 PRONG KNOB (43) to the FRONT UPRIGHT (2) as shown. • Apply eight PARAGLIDES (42) to the INSIDE of the tube on the UPRIGHT (2) and on the OUTSIDE of the SEAT ADJUST (3) as shown. • CAREFULLY insert the SEAT...

Page 27 - LIMITED WARRANTY

2 7 NOTES: LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired ...