ParaBody 100 - Manuals - manualsarea.com

Page 2 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH; Consult a physician before beginning any exercise program.

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the Parabody 100102 LEG PRESS. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat,level surface to assure its proper function. * 3/4” wrench* 9/16” ...

Page 3 - PARTS LIST

3 PARTS LIST PART # 7 1 4 0 5 0 8 7 1 4 0 8 0 2 6 8 0 6 2 0 8 7 1 4 0 6 0 8 7 1 4 0 7 0 8 7 1 4 0 9 0 8 7 1 2 8 1 0 8 6 9 9 4 7 2 1 3 1 0 2 9 2 2 KEY 1 2 3 4 5 6 7 8 9 QTY 1 1 1 1 1 1 1 2 6 PART # 3 1 0 2 5 0 1 3 1 0 2 8 0 2 3 1 0 2 9 4 4 3 1 0 2 8 0 1 3 1 0 4 9 0 1 6 4 1 6 6 0 1 711 5 2 0 1 7 1 2 8...

Page 4 - FIGURE 1

9-1/2" 4 FIGURE 1 STEP 1: • SECURELY assemble the SECOND ARM (5) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS (14), one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 1. 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 12 1/2 X 5” 1 1 3 1 7 1 4 4 5 • SECURELY assemble...

Page 5 - FIGURE 2

11-1/4" 5 FIGURE 2 STEP 2: • SECURELY assemble the SECOND ARM (5) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS (14), one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 2. • SECURELY assemble the MAIN ARM (4) to the FRAME (1) using one 1/2 X 5” BOLT (12), tw...

Page 6 - FIGURE 3

FIGURE 3 STEP 3: 6 • Insert two 3/4” FLANGE BEARINGS (14) and one 3/4 X 4” SHAFT (17) into the SECOND ARM (5) as shown in FIGURE 3. • Insert two 3/4” FLANGE BEARINGS (14) and one 3/4 X 4” SHAFT (17) into the MAIN ARM (4) as shown in FIGURE 3. 1 7 1 4 4 5 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2

Page 7 - FIGURE 4

7 STEP 4: FIGURE 4 • SECURELY assemble the FOOTPLATE (6) to the SECOND ARM (5) and the MAIN ARM (4) using two 1/2 X 5” BOLTS (12) and two 1/2” LOCK NUTS (13). See FIGURE 4. 12 1/2 X 5” 6 5 1 3 4

Page 8 - FIGURE 5

8 STEP 5: FIGURE 5 3/8 X 2-3/4” 9 1 11 1 0 3 • SECURELY assemble the HANDLE (3) to the FRAME (1) using two 3/8 X 2-3/4” BOLTS (9), four 3/8” FLAT WASHERS (10) and two 3/8” LOCK NUTS (11) as shown in FIGURE 5. 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2

Page 9 - FIGURE 6

9 STEP 6: FIGURE 6 • CAREFULLEY slide the SEAT ADJUST (2) into the FRAME (1) and engage the SPRING PIN into one of the adjustment holes. See FIGURE 6. • Attach eight PARAGLIDE STRIPS (15) to the inside of the tube on the FRAME (1) using the following steps: • Thoroughly clean all surfaces where the ...

Page 10 - FIGURE 7

STEP 7: FIGURE 7 • SECURELY assemble one PAD (8) to the SEAT ADJUST (2) using two 3/8 X 2-3/4” BOLTS (9) and two 3/8” FLAT WASHERS (10) as shown in FIGURE 7. 9 3/8 X 2-3/4” 1 0 2 8 1 0 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2

Page 11 - FIGURE 8

11 STEP 8: FIGURE 8 • SECURELY assemble one PAD (8) to the FRAME (1) using two 3/8 X 2-3/4” BOLTS (9) and two 3/8” FLAT WASHERS (10) as shown in FIGURE 8. 3/8 X 2-3/4” 9 1 1 0 8 Thank you for purchasing the Parabody 100 LEG PRESS. If unsure of proper use of equipment, call your local Parabody distri...