Panasonic WV-SF539 - Manuals

16 Configure the settings relating to the authentication [User mng.] .....................................................................................................138 16.1 Configure the settings relating to the user authentication [User auth.] ..................138 16.2 Configure the settings...

1 Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. 1.1 Monitor images from a single camera 1. Start up the web browser. 2. Enter the IP address designated using the Panasonic “IP Setting Software” in the address box of thebrowser. • Example when...

1.2 About the “Live” page O P S Q R N A B DEF C G HI V U T L M J K [select language] pull-down-menu The camera’s display language can be selected. The default language can be set in the [Language] in the[Basic] settings. ( ® page 52) [Setup] button *1 Displays the setup menu. The button will turn gr...

When this button is clicked, the button will turn into the button and audio from the PC will not be heard. Audio output volume can be adjusted (Low/Middle/High) by moving the volume cursor . Note • When a user is using the audio transmission function with “Interactive(Half-duplex)” selected, therece...

By matching the settings of the [Compression] and [Stream] buttons on the “Live” page to the “Cropping”settings (“H.264”, “JPEG(VGA)/JPEG(640x360)”, or “JPEG(QVGA)/JPEG(320x180)”) configured on the[JPEG/H.264] tab, cropping images will be displayed on the [Cropping] display of the “Live” page and th...

A B C A B C Note • The cropping function can be used only when “2 mega pixel [16:9]”, “1.3 mega pixel [16:9]”, or “1.3mega pixel [4:3]” is selected for “Image capture mode”. 1.4 Monitor picture in picture images By using the picture in picture function, a cropping image or an alarm image can be adde...

1.5 Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras)can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras inadvance. 4 cameras can be registered as a grou...

2 Monitor images on a cellular phone/mobile terminal 2.1 Monitor images on a cellular phone It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only)from the camera on the screen of the cellular phone. IMPORTANT • When the authentication window is...

Functions Outline of functions C Image quality control It is possible to change the image quality between “Quality1” and“Quality2”. ( ® page 81) D AUX control *2 Controls the AUX terminal.These buttons will be displayed only when “AUX output” is selected for“Terminal 3” on the setup menu. ( ® page 1...

3 Record images on the SD memory card manually (WV-SW559/WV-SP509/WV-SF549/ WV-SF539) Images displayed on the “Live” page can be recorded on the SD memory card manually. This button is operableonly when “Manual” is selected for “Save trigger” on the [SD memory card] tab on the “Basic” page of the se...

4 Action at an alarm occurrence The alarm action (camera action at an alarm occurrence) will be performed when the following alarms occur. 4.1 Alarm type • Terminal alarm: When connecting an alarm device such as a sensor to the alarm input terminal of the camera, the alarm action will be performed w...

About the log list window Number of the listed logs Total number of the logs of the selected log type and a number of the log being displayed on the top of the loglist will be displayed. Note • Enter the desired log number and press the [Enter] key on the keyboard. The log of the designatednumber wi...

7 Playback of images on the SD memory card (WV-SW559/WV-SP509/WV-SF549/WV-SF539) When clicking a time and date listed on the log list window, the “Live” page will turn to the “Playback” page.When images associated with the clicked time and date are on the SD memory card, the first image of themwill ...

When the [PLAY] button or the [REV PLAY] button is clicked during fast reverse playback, playback speed willreturn to the normal playback speed. [REV PLAY] button Images will be played in reverse sequential order. [PLAY] button When this button is clicked, images will be played in sequential order. ...

8 About the network security 8.1 Equipped security functions The following security functions are featured in this camera. Access restrictions by the host authentication and the user authenticationIt is possible to restrict users from accessing the camera by setting the host authentication and/or th...

9 Display the setup menu from a PC The settings of the camera can be configured on the setup menu. IMPORTANT • The setup menu is only operable by users whose access level is “1. Administrator”. Refer topage 138 for how to configure the access level. 9.1 How to display the setup menu 1. Display the “...

9.2 How to operate the setup menu A B Menu buttonsSetup page 1. Click the desired button in the frame on the left of the window to display the respective setup menu.When there are tabs at the top of the “Setup” page displayed in the frame on the right of the window, clickthe desired tab to display a...

9.3 About the setup menu window A B C D FG H IJ E K L N O M [Setup] button Display the “Setup” page. [Live] button Display the “Live” page. [Basic] button Displays the “Basic” page. The basic settings such as time and date and camera title, and the settingsrelating to the SD memory card ( SW559 SW55...

10 Configure the basic settings of the camera [Basic] The basic settings such as camera title, time and date, SD memory card and the logs can be configured onthe “Basic” page. The “Basic” page has 3 tabs; the [Basic] tab, the [SD memory card] tab SW559 SW559 SP509 SP509 SF549 SF549 SF539 SF539 , and...

Note • Depending on the network environment, notification may not be provided in real time. [Alarm status reception port] When selecting “Real time” for “Alarm status update mode”, designate a port number to which the status changenotification is to be sent. • Available port number: 1 - 65535 • Defa...

SD memory card [SD memory card] Select “Use” or “Not use” to determine whether or not to use the SD memory card. • Default: Use IMPORTANT • Select “Not use” when operating without an SD memory card. • Before removing the SD memory card from the camera, it is necessary to select “Not use” first. Ther...

• Due to the difference in file formats, the indication of remaining capacity of the SD memory card differsbetween the cases when “JPEG” is selected and when “H.264(1)” or “H.264(2)” is selected for“Recording format”. • When “H.264(1)” or “H.264(2)” is selected for “Recording format”, the following ...

• When “Manual” or “Schedule” is selected when “H.264(1)” or “H.264(2)” is selected for “Recordingformat”, even if “Save logs” ( ® page 74) of “Alarm” is set to “On”, detected alarm logs are not recorded in the log list. • When “JPEG” is selected for “Recording format”, “Schedule” is unavailable. • ...

[Image quality] Select the quality for H.264 images to be recorded from the following.Low(Motion priority)/ Normal/ Fine(Image quality priority) • Default: Normal Note • When “Constant bit rate” is selected for “Recording priority”, this setting is available. [Refresh interval] Select an interval (I...

• When an SD memory card is formatted while another user is in operation, the operation will becanceled. • It is impossible to access the SD memory card during the process of formatting. • All data saved on the SD memory card will be deleted when the SD memory card is formatted. • Do not turn off th...

Image capture size: VGA Capacity of SD memory card Image quality 0 Super fine 1 Fine 2 3 4 64 GB 320,000 448,000 512,000 576,000 640,000 32 GB 160,000 224,000 256,000 288,000 320,000 16 GB 80,000 112,000 128,000 144,000 160,000 8 GB 40,000 56,000 64,000 72,000 80,000 4 GB 20,000 28,000 32,000 36,000...

Image capture size: QVGA Capacity of SD memory card Image quality 0 Super fine 1 Fine 2 3 4 64 GB 768,000 832,000 864,000 896,000 960,000 32 GB 384,000 416,000 432,000 448,000 480,000 16 GB 192,000 208,000 216,000 224,000 240,000 8 GB 96,000 104,000 108,000 112,000 120,000 4 GB 48,000 52,000 54,000 ...

10.4 Configure the settings relating to the logs [Log](WV-SW559/WV-SP509/WV-SF549/WV-SF539) Click the [Log] tab on the “Basic” page. ( ® page 46, page 48) The settings relating to the log list can be configured in this section. Alarm Settings for the alarm log list can be performed. [Save logs] Sele...

Note • When “Recording format” is set to “H.264(1)” or “H.264(2)”, “Save logs” is set to “On” or “Off” dependingon the setting of “Save trigger”. • Schedule saving is available only when “H.264(1)” or “H.264(2)” is selected for “Recording format”. FTP error Perform the settings for the FTP error log...

11 Configure the settings relating to images and audio [Image/Audio] The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can beconfigured on this page.The “Image/Audio” page has 3 tabs; the [JPEG/H.264] tab, the [Image quality] tab and the [Audio] tab. 1...

11.2 Configure the settings relating to JPEG images[JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ® page 46, page 48) JPEG Configure the settings such as “Refresh interval (JPEG)*”, “Image capture size” and “Image quality” on thissection. Refer to page 83 for further informatio...

[Super Dynamic(SD)] Select “On” or “Off” to determine whether or not to activate the super dynamic function.Refer to the description “Super Dynamic function” about the super dynamic function. • On: The super dynamic function will work. • Off: The super dynamic function will not work. • Default: Off ...

11.9 Configure the VIQS setting Click the [Setup>>] button of “VIQS” on the [Image quality] tab of the “Image/Audio” page. ( ® page 89) VIQS is an abbreviation of Variable Image Quality on Specified area and is a feature that enables you to changethe images of a specified area.It is possible t...

11.10 Configure the VIQS area The VIQS area is specified by following the steps below. 1. Drag the mouse on the screen to specify the area (up to 2 areas). → The specified area is set to area “1(White)”, and the outline is displayed.The areas are set in the area number order from number 1. The color...

12 Configure the multi-screen settings [Multi-screen] The cameras from which images are to be displayed on a multi-screen can be registered on the“Multi-screen” page. ( ® page 46, page 48) [IP address] Enter the IP address or the host name of the camera to be used for the multi-screen. 4 cameras can...

13 Configure the alarm settings [Alarm] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, theVMD area settings, and the alarm occurrence notification can be configured on this page.The “Alarm” page has 3 tabs; the [Alarm] tab, the [VMD area] tab...

• When “3 mega pixel [4:3]” is selected for “Image capture mode”, alarm images cannot be transmittedto the FTP server. SW559 SW559 SP509 SP509 SF549 SF549 SF539 SF539 : • When “Alarm input” or “Manual” is selected for “Save trigger” on the [SD memory card] tab, images willnot be transmitted to the F...

1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics • Default: 100pics • Recording duration Approximate time to be taken to save the set “Number of images” with the set “Transmission interval” w...

Alarm output terminal setup [Alarm output trigger] Select “On” or “Off” to determine whether or not to output the alarm signals to the alarm output terminal whenan alarm is detected. • Default: Off [Alarm output type] Select “Latch” or “Pulse” for the alarm output terminal at an alarm occurrence. • ...

• Default: 1 [Detection sensitivity] Adjust the sensitivity of motion detection in the VMD area using the slider. The settings can be configured foreach area individually. The larger the value is set, the higher the sensitivity level becomes.The current value (1 (low) - 15 (high)) will be displayed ...

[Alarm image attachment] Select “On” or “Off” to determine whether or not to attach an image to the E-mail to be sent when an alarm isdetected. • Default: Off Note • The settings for “Image capture size” of the “Alarm image” section on the [Alarm] tab ( ® page 115) will be applied to the size of the...

The settings relating to Panasonic alarm protocol can be configured in this section. Panasonic alarm protocol notification [Panasonic alarm protocol] Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol accordingto the settings for the “Alarm” and “Dia...

14 Configure the setting relating to the image recognition [Advanced func.] The setting relating to the XML notification and the face detection can be configure on the “Advanced func.”page.The “Advanced func.” page has 2 tabs; the [XML notification] tab and the [Face detection] tab. 14.1 Configure t...

• Face data Detection info.(Original)/Detection info.(Advanced) Default: Detection info.(Original) [Notification interval] Select the notification interval. • Face data 1s/2s/3s/4s/5s/6s/10s/15s/20s/30s/1min Default: 1s Note • When [Notification data] is set to “Detection info.(Original)”, the [Noti...

IMPORTANT • The face detection function shall not guarantee the detection of faces in an image. The face detectionaccuracy varies with imaging conditions. Face detection [Face detection] Determine whether or not to attach face detection information to images. In addition, determine whether or notto ...

15 Configure the settings related to advanced view [Advanced view] Settings related to cropping and picture in picture (PiP) can be configured on the “Advanced view” page.The “Advanced view” page has 2 tabs; the [Cropping] tab, and the [PiP] tab. 15.1 Configure the settings relating to cropping[Crop...

Cropping area setting Full image display Displays the full camera angle image. Cropping outline Displays the set cropping area. Up to 4 areas can be set. When set, numbers are automatically assignedand displayed on the top left of the cropping area. When setting an area, the selected area is outline...

16 Configure the settings relating to the authentication [User mng.] The settings relating to the authentication such as users and PCs restrictions for accessing the camera with aPC or cellular phone/mobile terminal can be configured on the “User mng.” page.The “User mng.” page has 3 tabs; the [User...

The description below is the configuration of the priority stream that can transmit images without deterioratingthe image quality and refresh interval even when multiple users access concurrently. Priority stream [Activation] Select “On” or “Off” to determine whether or not to use the priority strea...

17 Configure the settings of the servers [Server] The settings relating to the E-mail server, the FTP server and the NTP server can be configured on this page.The “Server” page has 3 tabs; the [E-mail] tab, the [FTP] tab and the [NTP] tab. 17.1 Configure the settings relating to the E-mailserver [E-...

IPv4 network [Network Settings] Select the method of how to configure the IP address from the following. • Static: The IP address is configured by entering manually on “IP address(IPv4)”. • DHCP: The IP address is configured using the DHCP function. • Auto(AutoIP): The IP address is configured using...

• Default: Auto(Advanced) Note • When “Auto(AutoIP)” is selected and the IP address cannot be obtained from the DHCP server, an IPaddress not used in the same network will be searched within 169.254.1.0 - 169.254.254.255. [IP address(IPv4)] When not using the DHCP function, enter the IP address of t...

When the MSS is restricted in the network line in use, select “Limited(1024byte)” or “Limited(1280byte)”. Referto the network administrator for further information about the MSS in the network line. • Default: Unlimited(1460byte) UPnP This camera support UPnP (Universal Plug and Play). By using the ...

HTTPS It is possible to enhance the network security by encrypting the access to cameras using the HTTPS function.Refer to page 156 for how to configure the HTTPS settings. [CRT key generate] CRT key (SSL encryption key) used for the HTTPS protocol is generated. To generate the CRT key, click the[Ex...

18.2 Configure the HTTPS settings Click the [Network] tab on the “Network” page. ( ® page 46, page 48) The settings relating to the HTTPS protocol that can enhance the network security by encrypting the accessto cameras on this page. The HTTPS settings will be configured in the following procedure. ...

Item Description Available number of characters [CRT key] Displays the key size and generation time & dateof the current key. Note • To use the server certificate, follow the requests from the CA about the information to be entered. • The available characters for [Common Name], [State], [Localit...

• When the [Confirm] button is clicked, the registered information of the installed server certificatewill be displayed in the “CA Certificate - Confirm” dialog box. (Only “Organizational Unit” will bedisplayed with an asterisk (*).) • When the [Delete] button is clicked, the installed server certif...

• When using the server certificate: In advance, install the root certificate and intermediate certificate on the browser in use. Follow theinstructions of CA for how to obtain and install these certificates. • When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate...

• When “On” is selected for both of the alarm image transmission function and the FTP periodic imagetransmission function, the alarm image transmission function will be given priority over the FTP periodicimage transmission function. For this reason, images may not be transmitted at the exact design...

19 Configure the settings relating to the schedules [Schedule] On the “Schedule” page, it is possible to configure the settings relating to schedules as follows. • Alarm permission (Alarm input will be received only in the specified schedule.) • VMD permission (Video motion detection will be active ...

21 Using the CD-ROM 21.1 About the CD launcher By inserting the provided CD-ROM into the CD-ROM drive of your PC, the CD launcher is automatically startedand the license agreement is displayed. Read the agreement and select “I accept the terms in the licenseagreement”, and then click “OK”.The CD lau...

21.2 Installing Panasonic “IP Setting Software” On the CD launcher window, click the [Install] button next to [IP Setting Software] to display the Panasonic “IPSetting Software” installation window. Confirm the following settings before starting the installation. A C D B Select the Panasonic “IP Set...

21.3 Installing the manuals On the CD launcher window, click the [Install] button next to [Manual] to display the Manual installation window.Confirm the following settings before starting the installation. A D E C B Select which manuals to install. The camera models that the manuals support are disp...

• The information displayed can be sorted by clicking the title of each displayed item. • When the [Network Settings] button is clicked, the “Network Settings” screen is displayed andnetwork settings can be changed. For further information, refer to page 196. 3. The viewer software “Network Camera V...

22 About the displayed system log Error indications relating to SMTP Category Indication Description POP3 server error Authentication error. • Entered user name or password may beincorrect. Check if the E-mail settings areconfigured correctly. Failed to find the POP3 server. • The IP address of the ...

Information Bar Depending on the OS installed on the PC, the following may occur. Follow the instructions below when thefollowing has occurred. By performing the following solutions, other applications may not be affected. When using Internet Explorer 9.0: The “Information Bar” ( A ) expressed in th...