Panasonic WV-CW244FE - Manuals

Panasonic WV-CW244FE – Manual in PDF format online.

Manuals:

Manual

Manual Panasonic WV-CW244FE

Summary

Page 2 - CAUTION; ENGLISH VERSION

-2- WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposedto dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The lightning flash with arrowheadsymbol, with...

Page 3 - ENGLISH

-3- FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXTCAREFULLY. WARNING: This apparatus must be earthed. IMPORTANT The wires in this mains lead are coloured in accordance with thefollowing code. Green-and-yellow: Earth Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appli...

Page 4 - CONTENTS

-4- CONTENTS FEATURES ..................................................................................................................................................................... 5PREFACE ..........................................................................................................

Page 5 - PREFACE; FEATURES

-5- PREFACE The WV-CW240 series is a 1/3” CCD colour cameradesigned for use in a video surveillance system. Thecamera features a high picture quality thanks to the useof digital signal processing LSIs, and easy installation. • Mounting method: Flush mounting/WV-CW244FE, Surface mounting/WV-CW240S • ...

Page 6 - PRECAUTIONS

-6- 1. This product should be installed and connected byqualified service personnel or system installers inconformity with local codes. 2. Use a class 2 power source supplying 12 V DC or24 V AC. 3. To prevent fire or electric shock hazard, use a ULlisted cable (VW-1, style 1007) to connect thepower ...

Page 7 - MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS; q w; Focus lock lever; Tilting lock screw; Zoom lock lever; Panning table

-7- MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS q w e r t !1 !0 o i u y ON 12 3 OFF ON LL SYNC INT* OFF* BLC ON SOFT AP SHARP* 2nd transport protection screw (Red) Space for heater unit * Default setting q Focus lock lever Fixes the focus position after adjusting. w Tilting lock screw Fixes the til...

Page 10 - INSTALLATION; Installation Plans & Preparations

-10- INSTALLATION ■ Installation Plans & Preparations ● WV-CW244FE “F” stands for flush mounting. This model can beinstalled on the wall or ceiling prepared with a 95 mmdiameter hole. 1. Space Prepare a space larger than ø160 mm. 2. Flush-mount hole Drill a hole having a 95 mm diameter on the wa...

Page 12 - Mounting the Camera; Disassembling of the camera

-12- 1. Space Prepare a space larger than ø160 mm. 2. Bracket Fixing Screws To fix the bracket, procure four M4 screws suitablefor the surface and structure of the wall/ceiling. 3. Attachment Fixing Screws Four screws are supplied as standard accessories. 4. Cable route • When routing cables through...

Page 13 - Connections

-13- 2. Remove the two red-coloured screws provided for transport protection using a Philips screwdriver. ● Heater unit installation See OPTIONAL HEATER UNIT for details. 2nd transportprotection screw (Red) ● Mounting the camera 1. Fix the camera to the installation surface. WV-CW244FE • Fix the att...

Page 14 - Video Output Connection; Wire colours & functions

220 - 240 V (WV-CW240S) Recommendedmaximumcable length Type of coaxialcable -14- ■ Connections ● Video Output Connection Connect the video output connector to the monitor orother system device with the procured coaxial cable.The maximum extensible length is shown in the table. ● Wire colours & f...

Page 15 - Cable Length and Wire Gauge

● Cable Length and Wire Gauge 24 V AC The recommended cable length and thickness areshown in the table for reference. The voltage sup-plied to the power terminals of the camera shouldbe within 19.5 V AC and 28 V AC. 12 V DC Use the formula below to calculate the power cableand power supply. The volt...

Page 16 - Image Adjustment

-16- ■ Image Adjustment You can manually adjust the pan/tilt/azimuth angles,focus, and zoom while observing the connected moni-tor. Notes: • Do not hold the camera by lens unit to adjust pan- ning, tilting, or azimuth. • The video output to the BNC will be interrupted while an LCD monitor is connect...

Page 17 - Waterproof Process

-17- 3. Zoom • Unlock the zoom lever.• Move the lever to adjust the zoom.• Lock the lever. 4. Focus • Unlock the focus lever.• Move the lever to adjust the focus.• Lock the lever. 5. Reinstalling the dome cover • Attach the dome cover to the camera.• Tighten the three tamper-proof screws. Zoom lock ...

Page 18 - SPECIFICATIONS

-18- SPECIFICATIONS Pick-up device: 752 (H) x 582 (V) pixels, Interline transfer CCD Scanning area: 4.8 (H) x 3.6 (V) mm (Equivalent to 1/3” pick-up tube) Scanning: 625 lines/50 fields/25 frames Horizontal: 15.625 kHz Vertical: 50 Hz Synchronization: Internal, Line-lock (only 24 V AC or 220-240 V AC...

Page 19 - STANDARD ACCESSORIES

-19- WV-CW240S: 220 V - 240 V AC 50 Hz 4.1 W (Camera)13 W (with heater) Dimensions: WV-CW244FE: 160.5 mm (H) 154 mm (D) 6-5/16" (H) 6-1/16" (D) WV-CW240S: 161 mm (H) 160 mm (D)6-3/8" (H) 6-5/16" (D) Weights: WV-CW244FE: 1.4 k g (3.1 lbs.) WV-CW240S: 2.1 k g (6.4 lbs.) Weights and dim...

Page 20 - OPTIONAL ACCESSORIES

-20- OPTIONAL ACCESSORIES Heater unit ......................................................................................... WV-CW3HE

Page 21 - OPTIONAL HEATER UNIT; Optional Heater Unit WV-CW3HE; Introduction

-21- OPTIONAL HEATER UNIT ■ Optional Heater Unit WV-CW3HE ● Introduction Installing this heater unit enables the camera to operate under in a low-temperature environment of –30°C (–22°F).The heater turns on automatically when the temperature inside the camera drops below +10°C (50°F) and turns offwh...

Page 22 - Installation; Specifications

-22- ● Installation 1. Open the dome cover. (See Disassembling the camera.) 2. Place the heater unit in the camera and fix it with the supplied screw. 3. Insert the harness into the heater unit connector of the camera. 4. Fold the desiccant pack in half, and attach it with adhesive tape to point ...