Panasonic WV-CP464 - Manuals

Page 2 - 80 lines of horizontal resolution; FEATURES; Auto Iris Lens Connector; This hole is used to mount the camera onto a mounting bracket.; Slide the panel to the left until it locks.; CONNECTIONS; : DC output voltage of power supply; 2 V DC Power Supply

1. The following functions are built in. (1) Auto Light Control (ALC)/Electronic Light Control (ELC)(2) The SUPER-D 2 function eliminates interference by strong background lighting which makes the camera picture dark, such as a spotlight.Dynamic range of 46 dB. (3) Various External Sync Functions, i...

Page 3 - Video Cable; AC Inlet Socket; (a) 2H type vertical enhancer for greater picture sharpness; 4 V AC Power Supply; Recommended wire gauge sizes for 24 V AC line.

Video Cable 1. It is recommended to use a monitor whose resolution is at least equal to that of the camera. 2. The maximum extensible coaxial cable length between the camera and the monitor is shown below. Cautions: 1. Connect to 12 V DC (10.8 V-16 V) or 24 V AC (19.5 V-28 V) class 2 power supply on...

Page 4 - FOCUS OR FLANGE-BACK ADJUSTMENT; • Mounting from the top; INSTALLATION OF CAMERA; Installation of Auto Iris Lens Connector

Mounting the Lens Caution: Before you mount the lens, loosen the screw on the side of the camera, and rotate thisring clockwise until it stops. If the ring is not at the end, the inner glass or CCD imagesensor may be damaged. 1. Mount the lens by turning it clockwise on the lens mount of the camera....

Page 5 - To return to the CAM SET UP menu; • Editing the CAM SET UP Menu; • Opening the Setup Menu; SETUP; END SET UP DISABLE

Left Button Set Button RightButton DownButton UpButton Up Button ( ) : Moves the cursor upwards. Use this button to select an item or adjustthe parameters. Down Button ( ) : Moves the cursor downwards. Use this button to select an item or adjust the parameters. Right Button ( ) : Moves the cursor to...

Page 6 - To edit the CAMERA ID; SETTING PROCEDURES

2. Move the CAMERA ID to the desired position by pressing / / / . 3. Press to fix the position of the CAMERA ID. The mode returns to the previous CAM- ERA ID menu. Notes: • The CAMERA ID stops at the edges of the monitor screen.• The CAMERA ID moves faster if any of / / / is kept pressed for a sec- ...

Page 9 - • Automatic White Balance Control Mode (AWC)

8. Adjust the horizontal phase by pressing or . The adjustable range is 0-2.0 µs. 6-3. Line-lock Sync Mode (LL) Note: The line-lock (LL) sync mode is not available when the camera operates on DC power. 1. Move the cursor to the SYNC parameter and select LL. Note: The settings in this menu can be mad...

Page 10 - To reset to the factory settings (CAMERA RESET)

8. Motion Detector Setting (MOTION DET) The motion detector detects the moving objects in the scene by monitoring changes inbrightness level. You can select the level of sensitivity for motion detection.When this camera is connected to a compatible intelligent CCTV system, the camera trans-mits an a...

Page 11 - Panasonic Security and Digital Imaging Company

Pick-up Device: 771 (H) x 492 (V) pixels, Interline Transfer CCD Scanning Area: 4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of1/3” pick-up tube) Scanning: 525 lines/60 fields/30 frames Horizontal: 15.734 kHz Vertical: 59.94 Hz Synchronization: Internal, Line-locked, External (VS/VBS) or Multip...