Page 2 - Preface; General terms and conditions of this document
2 IIOT-VIEW-SSIG-1 Preface Thank you for purchasing our product. For full use of this product safely and properly, please read this document carefully. This product has been strictly checked and tested prior to its delivery. However, please make sure that this product operates properly before using ...
Page 3 - Contents
IIOT-VIEW-SSIG-1 3 Contents Preface ......................................................................................................................................................................... 2 1. Specifications .............................................................................
Page 4 - Specifications; Standards and Regulatory Approvals
4 IIOT-VIEW-SSIG-1 1. Specifications 1.1. Standards and Regulatory Approvals 1.1.1. Certifications EN Standard EN 300 220-1 ETSI EN 301 489-1 ETSI EN 301 489-3 EN 55032:2015/AC:2016 EN 55024:2010 EN 61000-4-2:2009 EN 61000-4-3:2006: +A1:2008 + A2:2010 FCC FCC Part 15 subpart C FCC Part 15.231 FCC Pa...
Page 5 - Reorient or relocate the receiving antenna.
IIOT-VIEW-SSIG-1 5 1.1.2. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential install...
Page 6 - CAUTION
6 IIOT-VIEW-SSIG-1 1.1.4. Battery Safety Warnings . CAUTION These products contain lithium metal batteries. Do not charge, short circuit, incinerate or mutilate the tag, otherwise the battery may vent or rupture and release hazardous materials. Do not store above 122F (50C)
Page 7 - Interfaces
IIOT-VIEW-SSIG-1 7 1.2. Interfaces 1.2.1. Screen The View tags incorporate electrophoretic displays to present information to the user. 1.2.1.1. View 3 Active Area (mm): 66.9 (H)× 29.06 (V) Resolution (pixel): 296 (H)×128 (V) Pixel Pitch (mm): 0.227×0.226 1.2.1.2. View 4 Active Area (mm): 84.8 (H)×6...
Page 8 - Pin
8 IIOT-VIEW-SSIG-1 1.2.4. I/O Port Both the View 3 and View 4 feature an identical I/O port on the end of the tag. The orientation of Pin 1 on the connector is shown in Figure 1 below: Figure 1 – GPIO Connector The port supports one digital input, one digital output and a single line communication c...
Page 9 - Physical Specifications
IIOT-VIEW-SSIG-1 9 1.3. Physical Specifications 1.3.1. View 3 1.3.2. View 4
Page 10 - Environmental Specifications; Storage Temperature
10 IIOT-VIEW-SSIG-1 1.4. Environmental Specifications Storage Temperature -20C to +50C Operating Temperature 0C 1 to +40C Ingress Protection IP50 Humidity 20% - 80% 1 – below 20C the radio will operate but the screen will not update
Page 11 - Installation; Brackets
IIOT-VIEW-SSIG-1 11 2. Installation 2.1. Brackets The View Tags are designed to be mounted using the included bracket. 2.1.1. View 3 Bracket
Page 13 - Attachment; The brackets are designed to be attached using one of two methods:; For securing with screws, the following options are specified:; Since the View Tags
IIOT-VIEW-SSIG-1 13 2.2. Attachment The brackets are designed to be attached using one of two methods: 2.2.1. Tie wraps Slots at either end of the bracket will accommodate standard tie wraps to mount the bracket. This can be useful when attaching to piping or other uneven surfaces. 2.2.2. Screws For...
Page 14 - Licenses; CMSIS
14 IIOT-VIEW-SSIG-1 3. Licenses 3.1. CMSIS /* ---------------------------------------------------------------------- * Copyright (C) 2010-2014 ARM Limited. All rights reserved. * * $Date: 19. October 2015 * $Revision: V.1.4.5 a * * Project: CMSIS DSP Library * * Description: This file has extern dec...