Panasonic TX-32PB50F, TX-28PB50F - Manuals

7 Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown belowto access and adjust features as desired. The PICTURE , SOUND and SET UP buttons are used to open the main menus and also to return to the previousmenu The up and down cur...

8 Press the PICTURE menu button Move to chosen menu option Adjust chosen option or access chosen menu Press the TV/AV button at any time to go back to watching TV Pressing the STR button after having adjusted a feature will store the setting as the default (replacing thefactory setting). Increase or...

9 Press the SOUND menu button Move to chosen menu option Adjust chosen option or access chosen menu Press the TV/AV button at any time to go back to watching TV Pressing the STR button after having adjusted a feature will store the setting as the default (replacing the factory setting). Some feature...

10 Press the SETUP menu button Move to chosen menu option Adjust chosen option or access chosen menu Press the TV/AV button at any time to go back to watching TV. Offers a choice of signals to send to the AV2 Scart socket. You can choose from the current TV programme position, the signal entering AV...

16 Press the ASPECT button to move through the six aspect options: Panasonic Auto , 4:3 , Zoom , S --- Zoom , 16:9 and Just . Notes: D If you leave Aspect set to Panasonic Auto, the TV software determines the best ratio for each programme viewed. In order not to disrupt your viewing, no mode informa...

17 4:3 4:3 will display a 4:3 picture at its standard 4:3 size without any stretching. Black stripes will be visible down the left and right sides of the picture. Zoom Zoom mode magnifies the central section of the picture. Press the red or green buttons to enlarge the picture vertically. Press the ...

18 Press the MULTI WINDOW button (whilst the on screen selector keys are on screen) to move between watching the current programme, the picture in picture feature, picture out of picture and picture and picture feature. The on screen selector keys (corresponding to the four coloured buttons on the r...

22 D Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected istransmitting Teletext. D Pressing the Picture button whilst in Teletext operation will display the contrast function with a cyan bar, press A " to alter the setting as required...

23 It is not possible to change the programme position when in News flash, Update or Sub Coded Page Access operation. Stores a favourite page in memory for instant recall. To store such a page, the TV must be in LIST mode, and the programme position must be from 1 --- 25. Press the Blue button, sele...

24 Stereo reproduction normally uses left and right speakers, but Digital Theater Systems (DTS), Dolby Digital and Dolby Pro Logic Surround go further, adding a centre and other channels so you are immersed in sound and special effects. Digital Theater Systems (DTS) / Dolby Digital Both DTS and Dolb...

25 Press the SOUND menu button Move to Surround menu option Access Surround menu Move to chosen menu option Adjust chosen option or access chosen menu Press the TV/AV button at any time to go back to watching TV If a DTS / Dolby Digital input is detected the Surround menu options instantly change --...

26 With a DTS / Dolby Digital input or if Pro Logic is selected in Surround mode , the following three modes of operation are available as the Speaker setting : Normal , Phantom , 3 Stereo . If front and rear speakers are connected, use Normal mode. Centre speaker information will be produced by the...

27 It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external equipment to both the front and rear of the TV.Once your equipment is connected, use the following procedure to view the input: Press the TV/AV menu button Press the relevant...

28 Rear sockets Additional equipment can be connected at the rear of the TV via three 21 pin Scart sockets, AV1 / AV2(S) / AV4(S), and via two digital audio sockets (one optical input for AV1 only and one shared optical/coaxial input for AV2, AV3 and AV4). DVD PLAYER Input/Output from AV2 Scart Sock...

29 The external speaker connections ( EXT ) on the rear of the TV allow you to create your own system using external speakers. Connections are provided for front and rear speakers. You may decide, for example, to connect external front left and right speakers and rear left and right surround speaker...

30 The AUDIO OUT sockets on the rear of the TV allow you to create a custom sound system using an external amplifier and external speakers. You may decide, for example, to use an external DTS / Dolby Digital amplifier to connect external front left and right speakers, rear left and right surround sp...

31 If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV). Symptoms...

32 Red in, S.C. --- In* Socket EarthCVBS out (video)CVBS earth Red earthGreen inGreen earthBlue inBlue earthAudio out (L)Audio out (R) CVBS in (video)RGB status earthStatus RGB --- ------ --- Status CVBSAudio in (L)Audio earthAudio in (R) 21 191715131197531 2018 161412108642 AV1 / AV4 Scart socket (...