Page 2 - Dear Panasonic Customer; Table of Contents; Picture Pro
2 Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display.To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.Retain y...
Page 3 - Important Safety Notice; fl
3 Trademark Credits • VGA is a trademark of International Business Machines Corporation.• Macintosh is a registered trademark of Apple Inc., USA.• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association. Even if no special notation has been made of company or...
Page 4 - Safety Precautions; WARNING; Setup; Do not place any objects on top of the Plasma Display.; Transport only in upright position!
4 Safety Precautions WARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corpo...
Page 5 - When using the Plasma Display; If problems occur during use
5 Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display. Do not stick any foreign objects i...
Page 6 - CAUTION; Be sure to disconnect all cables before moving the Plasma Display.; Cleaning and maintenance; If the cabinet becomes dirty, wipe it with a soft, dry cloth.
6 Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display. • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cann...
Page 7 - Small Parts; children to avoid accidental ingestion.; Disassembly; Do not disassemble or modify the 3D Eyewear.; Lithium Battery; Batteries must not be exposed to excessive heat such as sunshine,; Use for commercial applications and public viewing; nger in the hinge section of the 3D Eyewear.; D Safety Precautions
7 Safety Precautions WARNING Small Parts 3D Eyewear contains small parts (battery and specialised band, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly Do not disassemble or modify the 3D Eyewear. Lithium Battery Batteries must not be exposed to exces...
Page 8 - Viewing 3D Content
8 Safety Precautions Viewing 3D Content Content for 3D viewing includes commercially available Blu-ray discs, 3D broadcasts, etc. When preparing your own 3D content, ensure that it is properly produced.Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or h...
Page 9 - Accessories Supply; Accessories; Check that you have the accessories and items shown; Remote Control Batteries; Requires two R6 batteries.; Precaution on battery use; Observe the following precaution:
9 Open Hook Close Accessories Supply Accessories Power supply cord Clamper × 1TMME289 Ferrite core × 2J0KG00000014 Batteries for the Remote Control Transmitter(R6 Size × 2) Remote Control TransmitterN2QAYB000689 Operating Instruction book Check that you have the accessories and items shown Remote Co...
Page 10 - Connections; Using the clamper; AC cord connection and; AC cord; Bundle the cables
10 1 2 1 2 Connections Speaker terminal (R) Speaker terminal (L) When connecting the speakers, be sure to use only the optional accessory speakers.Refer to the speaker’s Installation Manual for details on speaker installation. AC cord connection (see page 15) Speakers (Optional accessories) Using th...
Page 11 - VIDEO and COMPONENT / RGB IN connection
, Y , P B , P R OUT P R P B Y AUDIO OUT R L VIDEO OUT AUDIO OUT R L 11 Connections VIDEO and COMPONENT / RGB IN connection Video equipment connection SLOT: Terminal board (optional accessories) insert slot (see page 4) Note: The right side slot is for factory use only. The terminal board with 1-slot...
Page 12 - HDMI connection; Signal Name
HDMI AV OUT 12 HDMI connection DVI-D IN connection [Pin assignments and signal names] 19 3 1 4 2 18 Note: Additional equipment and HDMI cable shown are not supplied with this set. Pin No. Signal name Pin No. Signal name 1 T.M.D.S Data2+ 11 T.M.D.S Clock Shield 2 T.M.D.S Data2 Shield 12 T.M.D.S Clock...
Page 13 - Signal Names for Mini D-sub 15P Connector; PC Input Terminals connection
1 6 7 8 3 9 4 5 10 15 14 13 12 11 2 13 Connections Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 72), adjustment values such as for the standard picture positions and sizes have already been stored in this unit. You can add up ...
Page 14 - SERIAL Terminals connection; Basic format for control data; Command
6 7 8 9 1 3 4 5 2 14 SERIAL Terminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display.• The computer shown is for example purposes only.• Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C...
Page 15 - Connecting the AC cord plug to the Plasma Display.
INPUT MENU ENTER/ +/ VOL -/ 15 Power On / Off Connecting the AC cord plug to the Plasma Display. Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green Turn the...
Page 16 - When; OSD Language
Day/Time Setup 99:99 Set Time Time MON 99:99 MON Day Day/Time Setup 99:99 PRESENT TIME OF DAY Time MON 99:99 Set 99:99 Time 99:99 PRESENT TIME OF DAY MON Day English (UK) Deutsch Français Italiano ENGLISH (US) Русский OSD Language Español 16 Power On / Off When fi rst switching on the unit Following...
Page 17 - Power ON warning message
17 Power On / Off When 3D images will be viewed by unspeci fi ed number of people or used for commercial applications, someone inauthority should convey the following precautions.These precautions should be followed in the home as well. 3D Viewing/ 3D Content/ Viewing distance/ 3D Eyewear recommenda...
Page 18 - Selecting the input signal; Using dedicated buttons for input selection
18 Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Video input terminal in AV IN (VIDEO).Component or RGB input terminal in COMPONENT/RGB IN.* HDMI input terminal in AV IN (HDMI). DVI input terminal in D...
Page 19 - Basic Controls; Main Unit; Volume Adjustment
19 INPUT MENU ENTER/ + / VOL -/ Basic Controls Main Unit MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 25) Normal Viewing Picture Sound Pos./Size Setup INPUT button(INPUT signal selection) (see page 18) Volume Adjustment Volume Up “+” Down “–” W h ...
Page 20 - Remote Control Transmitter
20 Basic Controls Remote Control Transmitter DVI button Press to select DVI-D input. (see page 18) PC button Press to select PC input. (see page 18) ASPECT button Press to adjust the aspect. (see page 21) SLOT buttons Press to select SLOT Terminal Board. (see page 18) COMPO. button Press to select C...
Page 21 - ASPECT Controls; All Aspect mode
INPUT MENU ENTER/ + / VOL -/ 4:3 Zoom1 16:9 Zoom2 Zoom3 14:9 Just 21 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 125...
Page 22 - Digital Zoom; Display the operation guide.
s 1 s 2 s 3 s 4 INPUT MENU ENTER/ + / VOL -/ 1 Exit 22 Exit or 22 Digital Zoom 1 3 2 4 This displays an enlargement of the designated part of the displayed image.To use this function, go to “Function Button Settings” in the Setup menu and set this function to the FUNCTION button (see page 56). Displ...
Page 23 - Viewing 3D images; To view the 3D images; Turn the 3D Eyewear on
23 Viewing 3D images You can enjoy viewing 3D images with contents or programmes compatible with 3D effect by using the 3D eyewear (optional). Note: You need the 3D IR TRANSMITTER (optional) and the 3D eyewear (optional) to view the 3D images on this display. For further information, see the instruc...
Page 24 - Troubleshooting for 3D Eyewear
24 Troubleshooting for 3D Eyewear Symptoms Checks Cannot see 3D images • Has the 3D Eyewear been switched On?• Ensure that “3D Function” in “3D Settings” is set to “On”. (see page 44)• Some 3D image signals may not be automatically recognized as 3D images. Set “3D Picture Format” in “3D Settings” to...
Page 25 - On-Screen Menu Displays; Remote Control; Picture menu; Menu display list; Setup menu
25 On-Screen Menu Displays Remote Control Unit 1 Display the menu screen. Press MENU Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal Viewing Picture Sound Pos. /Size Setup 2 Select the menu. SetupPos./SizeSound Options Picture Monitor Memory save Memory...
Page 26 - To hide the menu; Normalise
26 Adjusting Pos. /Size 1 Display the menu screen. 2 Select “Pos. /Size”. Setup Pos. /Size Sound Picture 2 access 1 select 3 Select the item and set. 2 adjust 1 select 1:1 Pixel Mode H-Pos 0 0 0 H-Size Auto Setup Normalise V-Pos 0 V-Size 0 Dot Clock 00 Clock PhaseClamp Position Off HV Delay Off 4 Ex...
Page 27 - Auto Setup; Using Remote Control; Dot Clock
27 Adjusting Pos. /Size ● Auto Setup When inputting a PC signal as an example, “H-Pos/V-Pos”, “H-Size/V-Size”, “Dot Clock” and “Clock Phase” are automatically corrected.This setting is enabled under the following conditions:• This setting is not activated during Digital Zoom.• When inputting an anal...
Page 28 - Clamp Position; Optimum value for Clamp Position adjustment; Over scan
28 Adjusting Pos. /Size ● 1:1 Pixel Mode Adjusts the display size when 1125i, 1125p or 1250i signal is input. Notes: • Select On when you would like to replay 1920 × 1080 input signal.• Applicable input signal; 1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p, 1250 (1080) / 50i• Select O...
Page 29 - Picture Adjustments; Display the menu screen.; Select the item and set.
29 Picture Adjustments 1 Display the menu screen. 2 Select “Picture”. Sound Picture SetupPos./Size 2 access 1 select 3 Select the item and set. 2 adjust 1 select Cinema Advanced settings Picture Mode 20 0 5 Normal Contrast Normalise Brightness 0 Colour 0 HueSharpnessWhite balance 4 Exit the menu. or...
Page 31 - Black
31 Enables fi ne picture adjustment at a professional level. Notes: The adjustment values are memorized separately for each input terminal. • The adjustment range values should be used as an adjustment reference. • Select the item and set. Advanced settings Carry out “W/B” adjustment as follows. 1. ...
Page 32 - Cinema reality
32 Picture Adjustments ● Cinema reality When “on”, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to “off”. Off On Note: When “On”, this setting only affects...
Page 33 - DIGITAL CINEMA COLOUR:; Edit; Colour gamut
33 Picture Adjustments 0 2.2 Input level Advanced settings Normalise Gamma 00 Off W/B High RW/B High G 0 W/B High B 0 W/B Low R 0 W/B Low G 0 W/B Low BCinema reality Off Studio Gain 0 Black extension Off Noise reduction Colour gamut 2 access 1 select Colour gamut Colour gamut EBU Select the item and...
Page 34 - Reset; Chromaticity diagram
34 Picture Adjustments ● Reset Resets the adjustment value of colour space. Note: This setting is re fl ected only for the selected input terminal and the “Picture Mode”. 1 Select “Reset”. R RatioG Ratio B Ratio R G B Colour gamut Edit Reset Colour gamut Custom 65535 2900 0 2110 65535 0 0 1760 65535...
Page 36 - Saving pro; Example: Specifying “MY PICTURE”
36 Picture Pro fi les Saving pro fi les Follow these steps to save picture adjustment values as pro fi les. Note: When the settings are locked in “Extended life settings”, pro fi les cannot be saved. 1 Specify the picture quality in the Picture menu and Advanced settings. (see page 29-34) 2 In the P...
Page 37 - les from the Picture menu>; les from; les directly from the remote control>; Loading pro
37 <Loading pro fi les from the Picture menu> 1 In the Picture menu, select “Memory load”. Memory save Memory load Memory edit 2 access 1 select 2 Select the pro fi le to load. MEMORY12 12. [ ] 1. [ ] MEMORY1 MEMORY2 2. [ ] 2 set 1 select <Loading pro fi les from on the remote control> 1...
Page 38 - Editing pro
38 Picture Pro fi les Editing pro fi les Delete or rename pro fi les as follows. <Deleting pro fi les> 1 In the Picture menu, select “Memory edit”. Memory save Memory load Memory edit 2 access 1 select 2 Select “Memory delete”. Memory name change Memory delete 2 set 1 select 3 Select the pro f...
Page 39 - Sound Adjustment; Item; SDI Sound Output
39 Sound Adjustment 1 Display the menu screen. 2 Select “Sound”. SetupPos. /Size Sound Picture 2 access 1 select 3 Select the item and set. 2 adjust 1 select Sound Mode Normal 1 Normalise Volume 0 Bass 0 Mid 0 Treble 0 BalanceSurround Off 4 Exit the menu. or Item Details Sound Mode Normal: Emits the...
Page 40 - Component
40 1 Display the menu screen. 2 Select “Setup”. Setup Pos. /SizeSound Picture 2 access 1 select 3 Select the item and set. Network Setup External scaler modePower saveStandby savePC Power management Off DVI-D Power management Off On Off Off No signal power off Disable No activity power off Disable C...
Page 41 - External scaler mode
41 External scaler mode Off On This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as resizing and picture quality adjustment. The setting is valid with the following input signals. 1125 (1080) / 24p•25p•30p•50p•60p Off: Use the built-...
Page 43 - OSD design
43 Setup menu OSD design OSD position OSD Language Choose the display position.Each time you press or , the on-screen menu display position changes. Display example Choose the background color (transparency). Type1 Type2 Type3 Select your preferred language. Selectable languages Italiano Français De...
Page 45 - Signal menu; Input signal display; • Colour system; If the picture image becomes unstable:; • XGA Mode; Auto
45 Setup menu Mid FRAME CREATION Auto Sync 1024 ×768 33.7 kHz60.0 Hz1125(1080)/60i XGA Mode H-Freq. V-Freq. Signal Format Signal [ RGB ] Mid FRAME CREATION Auto 33.7 kHz60.0 Hz1125(1080)/60i XGA Mode H-Freq. V-Freq. Signal Format Signal [ Component ] Mid FRAME CREATION Auto Colour system Signal [ AV...
Page 47 - Waveform Monitor
47 Setup menu Waveform Monitor The input signal from video equipment is displayed as waveforms so that the signal level can be checked. Notes: • This function is enabled when “Studio mode” in Options menu is set to “On”. • This function is disabled during 3D images. • Applicable input signal; HDMI, ...
Page 49 - • Centre
49 Setup menu • 4 : 3 Select 4:3 marker display and the safe area marker type.Off 95% 93% 90% 88% 80% User • Selecting User allows the marker area set in 1% increments in “Marker Size (%)” to be re fl ected in the con fi guration of safe area marker. 90% Area marker • Centre The centre marker is dis...
Page 50 - Select mode by “Mode Select”.
50 Setup menu Network Setup Marker settings Waveform Monitor Network Setup Screensaver Input label Extended life settings Function Button Settings On/Off Timer Setup Day/Time Setup Signal 3D Settings RGB/MONO settings The RGB/MONO settings function is also enabled/disabled with the FUNCTION button o...
Page 51 - Screensaver; Function selection; Overlay scrolling bar :; Mode selection; Standby after SCR Saver:
51 Screensaver Setup menu Do not display a still picture, especially in 4:3 mode, for any length of time.If the display must remain on, a Screensaver should be used. Network Setup External scaler modePower save Off Off Component/RGB － in select RGB Marker settings Waveform Monitor RGB/MONO settings ...
Page 52 - Setup of Screensaver Time; To
52 Setup menu 3 Setup of Screensaver Time After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.) Screensaver Start 6:15 Start Time 12:30 F...
Page 53 - Extended life settings; Side panel; Image Retention Reduction Menu
53 Network Setup External scaler modePower save Off Off Component/RGB － in select RGB Marker settings Waveform Monitor Network Setup RGB/MONO settings Screensaver Input label Extended life settings Function Button Settings On/Off Timer Setup Day/Time Setup Signal 3D Settings Express settings Custom ...
Page 54 - Peak limit; NANODRIFT Saver
54 Setup menu Peak limit On: Suppresses image contrast (peak brightness). Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 70) Express settings Set the “Image Retention Reduction” menu to the recommended settings.All menus will be locked. Pi...
Page 55 - Custom settings
55 Setup menu Custom settings Set the individual “Image Retention Reduction” menu. 1 Select “Custom settings”. Custom settings Reset Extended life settings Express settings 2 access 1 select 2 To set each menu to the recommended setting:Select “Recommended settings”. 30 Off Unlock High Dynamic Mid C...
Page 56 - Customizing the Input labels; Select an input terminal and set.; Using FUNCTION button; • Function Button 1 - Function Button 8; • Function Button Guide
56 Setup menu The input label changes as follows each time the ◄ or ► button is pressed. (Skip) : The INPUT button press will skip its input. This function can change the label of the Input signal to be displayed. (see page 18) Customizing the Input labels Note: The setting items are the same as the...
Page 59 - Options Adjustments
59 Options Adjustments Item Adjustments Audio input select Set up the sound when an image input is selected. (see page 62) Onscreen display On: Displays all the following on screen. • Power on display • Input signal switch display • No signal display• Remainig time of off-timer after was pressed. Of...
Page 62 - When a Terminal Board with dual input terminals is installed
62 Options Adjustments Set up the sound when an image input is selected. Image input Audio input [SLOT INPUT]*1 SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO [VIDEO] SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO [COMPONENT]*2 SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO[HDMI] SLOT IN...
Page 63 - Display of the FUNCTION button guide; Scrolling bar / Test Patterns; Factory default settings; Scrolling bar
63 Display of the FUNCTION button guide Pressing the FUNCTION button can display the FUNCTION button guide to refer for the function of each button. Assigning functions to the FUNCTION button on the remote control enables a user to switch between show/hide and modes with just a single touch of a but...
Page 65 - Using Network Function; Example of Network Connection; Supported commands; Installing the Ferrite core
65 Using Network Function This unit has a network function to control the network connected display with your computer. Note: To use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 58)When “LAN” is set, the slot power is turned...
Page 66 - PJLinkTM Protocol
66 Using Network Function PJLink™ Protocol The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol. • Display setup• Display status query Supported commands Commands to control the unit with PJLink™ protocol a...
Page 67 - Authentication screen; Using Web Browser Control; Before Using Web Browser Control
67 Unit Setup Set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 58) Computer Setup Disable the proxy server settings and enable JavaScript. You can use a Web browser to control the unit and set up a network and password. Access to the TOP screen of th...
Page 68 - TOP screen structure of the Web browser control
68 Using Web Browser Control TOP screen structure of the Web browser control After logging in, the TOP screen of the Web browser control is displayed. Menu Menu items are displayed. When a button is clicked, setup screen of each item is displayed. Item Details BASIC CONTROL BASIC CONTROL screen is d...
Page 70 - Troubleshooting; Plasma Display panel
70 Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Interference Noisy Sound Electrical AppliancesCars / MotorcyclesFluorescent light Normal Picture No Sound Volume(Check whether the mute function has been ...
Page 71 - List of Aspect Modes
71 List of Aspect Modes Aspect mode Picture Enlarged screen Description All Aspect: On Factory settingAll Aspect: Off 16:9 16:9 The display of the pictures fi lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed. This mode is suited to ...
Page 72 - Applicable Input Signals
72 Applicable Input Signals Signal name Horizontal frequency (kHz) Vertical frequency (Hz) COMPONENT / RGB IN / PC IN (Dot clock (MHz)) DVI-D IN (Dot clock (MHz)) HDMI 1 525 (480) / 60i 15.73 59.94 * (13.5) * (27.0) * 2 525 (480) / 60p 31.47 59.94 * (27.0) ∗ 5 * (27.0) * 3 625 (575) / 50i 15.63 50.0...
Page 73 - ID Remote Control Function; ID Cancellation
73 ID Remote Control Function Applicable Input Signals Video input (VIDEO) Signal name Horizontal Vertical frequency(kHz) frequency(Hz) 1 NTSC 15.73 59.94 2 PAL 15.63 50.00 3 PAL60 15.73 59.94 4 SECAM 15.63 50.00 5 Modi fi ed NTSC 15.73 59.94 You can set the remote control ID when you want to use th...
Page 74 - Shipping condition; Select “OSD Language”.; Press for more than 5 seconds.; Select “YES” and wait for 10 sec.
74 Note: Press to return to Setup menu when con fi rmation screen is displayed. [from the unit] 1 Press the MENU button till the Setup menu is displayed. 2 Press the or button to select “OSD Language”. 3 Press the ENTER button for more than 5 seconds. 4 Press the or button to select “YES”. 5 Press t...
Page 76 - Customer’s Record
<Software Information for This Product> This product has software installed partially licensed under the Free BSD LICENSE. Free BSD LICENSE regulations under the above specifications are as follows: (These regulations are set by the third party; therefore the original (English) regulations are...
Panasonic RB F10
User Manual
Panasonic SC HTB200
User Manual
Panasonic CS Z25UFRAW CU Z25UBRA
Manual
Panasonic CS Z50UFRAW CU Z50UBRA
User Manual
Panasonic DMW BLK22
User Manual
Panasonic NI WL55
Manual
Panasonic DMP BD903
Manual
Panasonic NN ST23QM
Manual
Panasonic FV-1115VK3
User Manual
Panasonic EH NA0J
Manual
Panasonic FV 30BG3
Manual
Panasonic RE7 59
User Manual
Panasonic NE C1275
Manual
Panasonic RG T810LHA
User Manual
Panasonic CF SR
User Manual
Panasonic RZ B110W
User Manual