Panasonic TH-152UX1 - Manuals

5 Trademark Credits • VGA is a trademark of International Business Machines Corporation.• Macintosh is a registered trademark of Apple Inc., USA.• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association. Even if no special notation has been made of company or...

6 Safety Precautions WARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corpo...

7 Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 200 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display. Do not stick any foreign objects i...

8 Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display. • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cann...

9 Safety Precautions WARNING Small Parts 3D Eyewear contains small parts (battery and specialised band, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly Do not disassemble or modify the 3D Eyewear. Lithium Battery Batteries must not be exposed to exces...

10 Safety Precautions Viewing 3D Content Content for 3D viewing includes commercially available Blu-ray discs, 3D broadcasts, etc.When preparing your own 3D content, ensure that it is properly produced. Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or ...

11 Accessories Supply Accessories Fixing band × 3TMME203 Nut cover × 3(M20) Nut cover × 3(M16) Batteries for the Remote Control Transmitter(R6 (AA) Size × 2) Remote Control TransmitterN2QAYB000560 Operating Instruction book Check that you have the accessories and items shown Remote Control Batteries...

12 Connections Video equipment connection 1 2 Pass the attached cable fi xing band through the clip as shown in the fi gure. To secure cables connected to Terminals, wrap the cable fi xing band around them then pass the pointed end through the locking block, as shown in the fi gure. While ensuring t...

13 Power On / Off Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green Turn the power to the Plasma Display off by pressing the switch on the unit, when the P...

14 Power On / Off Italiano Español ENGLISH (US) English (UK) Deutsch Français OSD Language Set Select When 3D images will be viewed by unspecifi ed number of people or used for commercial applications, someone in authority should convey the following precautions. These precautions should be followed...

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. HDMI input terminal in HDMI 1.HDMI input terminal in HDMI 2.Input terminal in Terminal Board.*4k2k HD-SDI input terminal in SDI IN.4k2k DVI-D input terminal in DVI-D IN.PC input term...

16 Normal Viewing Picture Pos. /Size Setup Basic Controls Main Unit INPUT MENU ENTER/ Right side surface Remote control sensor Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the ...

17 Basic Controls Remote Control Transmitter Standby (ON / OFF) button The Plasma Display must fi rst be turnedon at the power switch (see page 13).Press this button to turn the Plasma Display On, from Standby mode. Press it again to turn the Plasma Display Off to Standby mode. PC button Press to se...

Remote Control Unit 1 Display the menu screen. Press several times. Each time the MENU button is pressed, the menu screen will switch. 2 Select the item. 25 0005 Picture Normal Normalise Normal Brightness Sharpness Picture Mode Colour Contrast Hue Advanced settings Memory save White balance Normal M...

Specifi cations TH-152UX1 Power Source 200 - 240 V AC, 50/60 Hz Power Consumption Power on 3700 W Stand-by condition 0.5 W Power off condition 0.3 W Plasma Display panel Drive method : AC type 152-inch, 17:9 aspect ratio Screen size 134.4” (W) × 70.9” (H) × 152.0” (diagonal) / 3,416 mm (W) × 1,801 m...

Panasonic Solutions Company Unit of Panasonic Corporation of North America Three Panasonic Way 2F-5 Secaucus, NJ 07094 Panasonic Professional Flat Panel Display Limited Warranty Models or Parts Part Warranty Labor Warranty Professional Flat Panel Display LIMITS AND EXCLUSIONS There are no express wa...

21 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED WARRANTY STATEMENT Item Video Tape P2/SD Cards Video Heads D5 Video heads Maintenance Items Colour Camera CCDImaging Block BT-H Series LCD Monitors * DLP™ Projectors * LCD Projectors above 2,500 ANSI Lumens * LCD Projec...

Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recover...