Panasonic SC-PMX9 - Manuals

Panasonic SC-PMX9 – Manual in PDF format online.

Manuals:

Manual

Manual Panasonic SC-PMX9

Summary

Page 2 - IMPORTANT; Unit; CAUTION

V QT 5 J68 2 Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same. Your system and the illustrations can look differently.These owner’s Manual are applicable to the following system. IMPORTANT SAFETY INSTRUCTIONS Read these operating instructi...

Page 3 - Supplied accessories

3 V QT 5 J68 0 Supplied accessories Check and identify the supplied accessories. Maintenance • To clean the main unit, wipe with a soft, dry cloth. • To clean the speakers, wipe with a fine-textured and dry cloth such as a microfibre cleaning cloth. • Never use alcohol, paint thinner or benzine to c...

Page 4 - Making the connections; Placement of speakers; Connecting other equipment

V QT 5 J68 4 Making the connections Connect the AC power supply cord only after all the other connections have been made. 1 Connect the FM indoor antenna. Place the antenna where reception is best. • Use an FM outdoor antenna if radio reception is poor. 2 Connect the speakers. Be careful not to cros...

Page 5 - Overview of controls; Select audio source; Inserting media; Top view

5 V QT 5 J68 Overview of controls 1 Standby/on switch [ Í ], [ Í /I ] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 2 Numeric buttons [1 to 9, 0, S 10] To select a 2-digit numberExample: 16: [ S 10] > [1] >...

Page 6 - Media information; Wired LAN connection

V QT 5 J68 6 “iPod_Dock” (Using Lightning connector): • Make sure that the iPod/iPhone is fully inserted and its back is resting against the cushion pad. • Make sure to remove the iPod/iPhone from its case. • Make sure to align your iPod/iPhone with the connector when inserting. “iPod_Port”: • Use t...

Page 7 - Wireless LAN connection; “Method 1”

7 V QT 5 J68 • The LAN cable must be connected or disconnected while the AC power supply cord is disconnected. • Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices. • Inserting any cable other than a LAN cable in the LAN port can damage the unit. • When a LAN cab...

Page 8 - Note for the iOS version; Method 2

V QT 5 J68 8 • This system can also be set using the WPS PIN code. (Before starting, refer to the wireless network router’s operating instructions for details on how to enter the PIN code.)1 Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK]. * 2 2 Press [SETUP]...

Page 9 - Method 4; Select your; home wireless network; Type the; password; Advanced network settings

9 V QT 5 J68 With this method, you will access this system’s wireless network settings from the Internet browser of your compatible device. • The following explanations are based on an iPhone. 1 Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK]. “With iPod” is ...

Page 10 - Using AirPlay with this system’s; January; Compatible AirPlay devices

V QT 5 J68 10 Using AirPlay with this system’s speakers Preparation • Complete the network settings. ( > 6) • Connect the iOS device or Mac/PC to the same home network as this system. 1 Turn this system on. • Check that “ ” is indicated on the display. • If it doesn’t be indicated, check the netw...

Page 11 - Note about changing the password; Playing back music files on the; Support format of DLNA client; Bluetooth; Display the password; Audio codec; Pairing Bluetooth

11 V QT 5 J68 The first time “D.Connect” is set to “On”, a password for this system’s network is randomly created and memorized in this system. • This password is memorized until it is changed. 1 While “D.Connect” is set to “On”:Press [SETUP] repeatedly to select “D.Connect”. 2 Press [ 2 , 1 ] to se...

Page 12 - About Bluetooth

V QT 5 J68 12 You can change the transmission speed to prioritize transmission quality or sound quality. Preparation • Press [SELECTOR] repeatedly to select “BLUETOOTH”. • If a Bluetooth ® device is already connected, disconnect it. 1 Press [PLAY MENU] repeatedly to select “Link Mode”. 2 Press [ 2 ,...

Page 13 - Radio

13 V QT 5 J68 Press [DISPLAY]. Note: • Maximum characters that can be shown: approximately 32 • This system supports ver. 2.3 ID3 tags. • Text data that the system does not support can show differently. 1 Press [PLAY MENU] to select “Repeat”, “Random” or “PLAYMODE”. 2 Press [ 2 , 1 ] and then press ...

Page 14 - Clock and timers; Sound effects; Setting the clock

V QT 5 J68 14 Clock and timers This is a 12-hour clock. 1 Press [CLOCK/TIMER] to select “CLOCK”. 2 Within 10 seconds, press [ 3 , 4 ] to set the time. 3 Press [OK]. Press [CLOCK/TIMER] to show the clock for a few seconds. Note: • Reset the clock regularly to maintain accuracy. The sleep timer switch...

Page 15 - Others; Checking the software version; Decrease the brightness of the display panel; Wi-Fi signal strength

15 V QT 5 J68 Others 1 Press [SETUP] to select “Dimmer”. 2 Press [ 2 , 1 ] to select “On” and then press [OK]. Note: • To cancel, select “Off” in step 2. This function switches off the system (except in radio source) if you do not use the system for approximately 20 minutes. 1 Press [SETUP] repeated...

Page 16 - Troubleshooting

V QT 5 J68 16 Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated do not solve the problem, consult your dealer for instructions. Do you have the latest software installed? • Occasionally, Panasonic m...

Page 17 - Main unit displays; Remote control code

17 V QT 5 J68 • If the playback stops, check the playback status on the iOS device or iTunes. • If play does not start (even though “ ” is displayed), restart the wireless network router, turn the Wi-Fi connection on the iOS device or Mac/PC off and on, and then make sure that your home wireless net...

Page 18 - Specifications; qk

V QT 5 J68 18 Specifications RMS output power Front Ch (both ch driven) 60 W per channel (3 ™ ), 1 kHz, 10% total harmonic distortion Total RMS power 120 W FTC output power Front Ch (both ch driven) 20 W per channel (3 ™ ), 50 Hz to 20 kHz, 1% total harmonic distortion Frequency Modulation (FM) Pres...

Page 19 - Limited Warranty; Panasonic Products Limited Warranty

19 V QT 5 J68 Limited Warranty (ONLY FOR U.S.A.) Panasonic Products Limited Warranty Limited Warranty Coverage (For USA Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the ...

Page 20 - Panasonic Canada Inc.; PANASONIC PRODUCT - LIMITED WARRANTY; LIMITATIONS AND EXCLUSIONS

V QT 5 J68 20 Limited Warranty (ONLY FOR CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY EXCHANGE PROGRAM Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a peri...