Panasonic SC-HTB690 - Manuals

Getting started Operations Reference Before use Precautions SQT0852 5 Be fo re us e Supplied items Check the supplied accessories before using this system. ≥ Product numbers are correct as of January 2015. These may be subject to change. ≥ The supplied AC mains lead is for use with this system only....

6 SQT0852 Control reference guide 1 [ ] NFC touch area ( > 20) 2 [ Í /I ] Standby/on switch ( Í /I ) Touch to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 3 [VOL j ] [VOL i ] Adjust the volume of this system ( > 21...

8 SQT0852 1 [ Í ] Turn the main unit on or off ( > 21) 2 [INPUT] Select the input source ( > 21) 3 [SETUP] Select the setup menu ( > 24) 4 [SOUND] Select the sound menu ( > 22) 5 [ -PAIRING] ≥ Select the Bluetooth ® device as the source ( > 21) ≥ Bluetooth ® pairing ( > 19) ≥ Disco...

Getting started Before use SQT0852 9 Getting s ta rted Step 1 Connections ≥ Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are completed. 1 Verify if the TV’s HDMI terminal is labelled “HDMI (ARC)...

10 SQT0852 A HDMI cable B Optical digital audio cable ≥ When you use the optical digital audio cable, insert the tip correctly into the terminal. You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to this system. Preparation ≥ Connect the main unit ...

Getting started SQT0852 11 With the IR Blaster connection, it is possible to send the IR signal received by this system’s remote control signal sensor to the TV’s sensor. Use the TV’s remote control within the operation range of this system’s remote control signal sensor. ≥ For the operation range, ...

12 SQT0852 ≥ Connect only after all other connections are completed. A To a household mains socket B AC mains lead for the main unit (supplied) C AC mains lead for the active subwoofer (supplied) § Insert the AC mains lead fully into the main unit. ≥ This system consumes a small amount of AC power (...

Getting started Precautions SQT0852 13 Step 2 Placement Put the subwoofer about 30 cm away from the TV. If the TV has wireless LAN components, put the subwoofer about 2 m away from them. When carrying the active subwoofer Take care not to damage the inside speaker unit. ≥ The speaker protection cove...

14 SQT0852 Choose a placement method that suits you best. When placing the main unit in a rack or on a table ≥ Place the main unit on a flat and horizontal surface. When attaching the main unit to a wall ≥ Place the main unit on a flat and vertical surface. ∫ When placing the main unit in front of t...

Getting started Precautions SQT0852 15 Additionally required accessories (commercially available) ≥ Fall prevention cord ..................................................................................................................... k 2 ≥ Screw eyes (to attach the fall prevention cord) ..........

16 SQT0852 The main unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 26 k g . The screws and other items are not supplied as the type and size will vary with each installation. ≥ Refer...

Getting started Precautions SQT0852 17 2 Attach the wall mount brackets to the main unit. A Wall mount bracket (supplied) B Screw (supplied) 3 Drive a screw into the wall. ≥ Use the measurements indicated below to identify the screwing positions on the wall. ≥ Leave at least 100 mm of space above of...

18 SQT0852 4 Fit the main unit securely onto the screw(s). 5 Secure the cord to the wall. ≥ Make sure that the slack of the cord is minimal. A Screw eye B Cord DO DO NOT ≥ Move the speaker so that the screw is in this position. ≥ In this position, the speaker will likely fall if moved to the left or...

Getting started Precautions SQT0852 19 Step 3 Wireless connections Preparation ≥ Turn on the main unit. 1 Press [ Í /I]. The active subwoofer will still consume a small amount of power even when it is turned off. 2 Check that the wireless link is activated. WIRELESS LINK indicatorLights red: The wir...

20 SQT0852 For NFC-compatible Bluetooth ® devices (Android TM devices) only Simply by touching an NFC (Near Field Communication)-compatible Bluetooth ® device on the main unit, you can complete all preparations, from registering a Bluetooth ® device to establishing a connection. Preparation ≥ Turn o...

Getting started Operations SQT0852 21 Operations Using this system Preparation ≥ Turn on the active subwoofer. ≥ Turn on the TV and/or connected device. 1 Press [ Í ] to turn on the main unit. 2 Select the source. ≥ This remote control cannot be used to control the operations of the connected device...

22 SQT0852 3D sound This system provides a feeling that the sound and the image are as one. ≥ To change the applied effect, refer to “Sound menu”. ( > right) ≥ Dolby Virtual Speaker effect is ON except STEREO mode. ≥ To turn off Dolby Virtual Speaker and the 3D surround effects, select “STEREO” a...

Operations SQT0852 23 ≥ The default setting is underlined. Changed settings will be kept until it is changed again, unless otherwise indicated. You can view the current audio format. Press and hold [SOUND] for more than 4 sec. ≥ The audio format is displayed for about 2 seconds. ≥ No audio format is...

24 SQT0852 Setup menu 1 Press [SETUP] repeatedly to select the setup item. 2 Press [ 4 ] [ 3 ] repeatedly to select the desired setting and then press [OK]. ≥ The default setting is underlined. Changed settings will be kept until it is changed again, unless otherwise indicated. DIMMER Dims the displ...

Operations SQT0852 25 Linked operations with the TV (VIERA Link “HDAVI Control TM ”) Preparation 1 Confirm that the HDMI connection has been made. ( > 9, 10) 2 Set the “HDAVI Control” operations on the connected equipment (e.g., TV). 3 For the optimal “HDAVI Control” operations change the followi...

26 SQT0852 Referenc e Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. No power. ≥ Unplug the AC mains lead fo...

Reference SQT0852 27 This system does not operate correctly. If the HDMI cable is connected to the wrong terminal (HDMI AV IN or HDMI AV OUT), this system will not operate correctly. Turn the main unit off, disconnect the AC mains lead and reconnect the HDMI cable(s). ( > 9, 10) VIERA Link relate...

Reference SQT0852 29 There is no audio.The power of the main unit turns off automatically. (When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.) ≥ There is a problem with the amplifier. ≥ Is the volume extremely high?If so, lo...

30 SQT0852 No power. Ensure the AC mains lead of the active subwoofer is connected properly. After turning the subwoofer on, it immediately turns off. Unplug the AC mains lead and consult your dealer. No sound from the subwoofer. ≥ Check that the active subwoofer is turned on. ≥ Check that the WIREL...

Reference SQT0852 31 About Bluetooth ® ∫ Frequency band used This system uses the 2.4 GHz frequency band. ∫ Certification of this device ≥ This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. ≥ The action bel...

32 SQT0852 Specifications AMPLIFIER SECTION RMS output power (non-simultaneous drive) Front ch (L, R ch) 70 W per channel (1 kHz, 10 %, 6 ≠ ) Centre ch (C ch) 70 W per channel (1 kHz, 10 %, 6 ≠ ) Subwoofer ch 140 W per channel (100 Hz, 10 %,3 ≠ ) Total RMS output power 350 W TERMINAL SECTION HDAVI C...

Reference SQT0852 33 ≥ Specifications are subject to change without notice. ≥ Mass and dimensions are approximate. ≥ Total harmonic distortion is measured by a digital spectrum analyzer. SPEAKER SECTION Front speakers (Built-in, L/R/C) Full range 6.5 cm cone type k 1 (Bass reflex type) Active subwoo...

34 SQT0852 EnglishDeclaration of Conformity (DoC) Hereby, “ Panasonic Corporation ” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Customers can download a copy of the original DoC to our R&TTE products from our Do...

36 SQT0852 NORSK Produkt ≥ For å redusere faren for brann, elektrisk støt eller skade på apparatet: j Utsett ikke produktet for regn, fukt, drypping eller sprut. j Ikke plasser objekter som er fylt med væske, som vaser, på apparatet. j Bruk kun anbefalt tilbehør. j Fjern ikke deksler. j Reparer ikke...

Reference SQT0852 37 Limited Warranty (ONLY FOR AUSTRALIA) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for pa...

EU Web Site: http://www.panasonic.com Panasonic Corporation 2015 Panasonic Corporation Panasonic Testing CentreWinsbergring 15, 22525 Hamburg, Germany Panasonic Marketing Europe GmbH Manufactured by: Importer for Europe: Panasonic CorporationKadoma, Osaka, Japan SQT0852 F0115BL0 For the United Kingd...