Panasonic SC-HTB18 - Manuals

Precautions Reference Getting started Before use Operations VQT5J46 5 Be fo re us e Supplied items Check the supplied accessory before using this system. ≥ Product numbers are correct as of March 2014. These may be subject to change. ≥ The illustrations shown may differ from your unit. ≥ Operations ...

6 VQT5J46 Control reference guide 1 Standby/on switch ( Í /I ) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 2 Adjust the volume of this system ( > 17) 3 Select the input source ( > 17) “TV” --# “BD/DVD” --...

Before use VQT5J46 7 8 AC mains lead ( > 10) 9 Wall mounting hole 10 OPTICAL DIGITAL AUDIO IN terminal ( > 9) 11 AUDIO IN terminal ( > 9) 12 MULTI ANGLE switch ( > 14, 15) Switch the audio quality according to the placement method of the main unit. 13 Subwoofer terminal14 Speaker cable §...

8 VQT5J46 1 Turn the main unit on or off ( > 17) 2 Turn the surround effect on or off ( > 17) 3 Turn the clear voice effect on or off ( > 17) 4 Select the TV as the source ( > 17) 5 Select the BD/DVD as the source ( > 17) 6 Adjust the output level of the subwoofer(bass sound) ( > 1...

Getting started VQT5J46 9 Before use Ge tting started Step 1 Connections ≥ Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are completed. A Optical digital audio cable ≥ When you use the optical di...

10 VQT5J46 Match the connector shape and connect to the terminal. A speaker cable ≥ Connect only after all other connections are completed. ≥ This system consumes a small amount of AC power ( > 23) even when it is turned off. In the interest of power conservation, if you will not be using this sy...

Getting started VQT5J46 11 By using the Bluetooth ® connection, you can listen to the sound from the Bluetooth ® audio device from this system wirelessly. ≥ Refer to the operating instructions of the Bluetooth ® device for further instruction on how to connect a Bluetooth ® device. Preparation ≥ Tur...

12 VQT5J46 Step 2 Placement ≥ Do not hold the main unit in one hand to avoid injury, you may drop the main unit when carrying it. ≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. When carrying the subwoofer To avoid interference, maintain the following distance...

Getting started VQT5J46 13 Precautions Choose a placement method that suits you best. ∫ When placing the main unit in front of the TV The main unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic Tracking System) sensor, remote control sensor, etc.) and the 3D Eyew...

14 VQT5J46 Additionally required accessories (commercially available) ≥ Fall prevention cord ..................................................................................................................... k 1 ≥ Screw eye (to attach the fall prevention cord)........................................

Getting started VQT5J46 15 Precautions Make sure that the screw used and the wall are strong enough to support the weight of at least 33 k g . The screws and other items are not supplied as the type and size will vary with each installation. ≥ Refer to step 3 for details about the required screws. ≥...

16 VQT5J46 Drive a screw into the wall. ≥ Use the measurements indicated below to identify the screwing positions on the wall. ≥ Leave at least 20 mm of space above of the main unit to allow enough space for fitting the main unit. ≥ Leave at least 10 mm of space on both sides of the main unit. Witho...

Getting started Operations VQT5J46 17 Precautions Op era tion s Using this system Preparation ≥ Turn on the TV and/or connected device. Press [ Í ] to turn on the main unit. Select the source. ≥ This remote control cannot be used to control the operations of the connected devices. ∫ When “ ” is sele...

18 VQT5J46 Advanced operations To display the current audio format. Press and hold [SURROUND] for more than 4 sec. ≥ The current audio format is indicated for 5 sec. Audio format is not indicated when “BD/DVD” or “ ” is selected as the source. The main unit is automatically turned off if there is no...

Operations VQT5J46 19 ∫ Remote control code When other Panasonic devices respond to this system’s remote control, change the remote control code on this system and the remote control. Preparation ≥ Turn off all other Panasonic products. ≥ Turn on the main unit. Change the remote control code to code...

20 VQT5J46 Referenc e Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. No power. ≥ Insert the AC mains lead se...

Reference VQT5J46 21 There is no audio.The power of the main unit turns off automatically. (When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.) ≥ There is a problem with the amplifier. ≥ Is the volume extremely high?If so, lo...

22 VQT5J46 Indicator illumination The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Indicator Description The indicator blinks for 20 sec. ≥ ...

Reference VQT5J46 23 Specifications ≥ Specifications are subject to change without notice. ≥ Mass and dimensions are approximate. ≥ Total harmonic distortion is measured by a digital spectrum analyzer. AMPLIFIER SECTION RMS Output power : Dolby Digital Mode Front ch (non-simultaneous drive) 30 W per...

Panasonic Corporation Web Site: http://panasonic.net C Panasonic Corporation 2014 p EU VQT5J46 F0314KE0 Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding p...