Panasonic SC-AK510 - Manuals

Panasonic SC-AK510 – Manual in PDF format online.

Manuals:

Manual

Manual Panasonic SC-AK510

Summary

Page 2 - Before using; Dear customer; System; Main unit; Table of contents; MODEL NUMBER; TELEPHONE NUMBER; Inside of product

Before using RQT6707 2 Dear customer Thank you for purchasing this product.For optimum performance and safety, please read these instructionscarefully. These operating instructions are applicable to the following systems.Unless otherwise indicated, illustrations in these operating instructionsare of...

Page 3 - Listening caution; Damage requiring service —The unit should be serviced by; Product Service; Product information; Safety check —After repairs or service, ask the servicer to; IMPORTANT SAFETY INSTRUCTIONS

Before using RQT6707 3 Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructionslisted below. Keep these operating instructions handy for future reference. Selecting fine audio equipment such as the unit you’v...

Page 4 - Batteries; The remote control; Use; Supplied accessories; Note

Before using RQT6707 4 Batteries The remote control Aim at the sensor, avoiding obstacles, at a maximum range of 7meters directly in front of the unit. • Keep the transmission window and the unit’s sensor free from dust. • Operation can be affected by strong light sources, such as directsunlight, an...

Page 5 - Preparation; Speaker cords; Caution; only

Before using RQT6707 5 (R) (L) 2 AM loop antenna Stand the antenna upon its base. 1 FM indoor antenna Adhesive tape Affix wherereception is best. 4 AC power supply cord Note The included AC power supply cord is for use with this unit only.Do not use it with other equipment.For your referenceInformat...

Page 6 - Front panel controls

Before using RQT6707 6 1 AC supply indicator (AC IN)This indicator lights when the unit is connected to the AC powersupply. 2 Standby/on switch ( f f f f f /I, POWER) Press to switch the unit from on to standby mode or vice versa. Instandby mode, the unit is still consuming a small amount of power. ...

Page 7 - The radio: manual tuning; Selecting channels; The radio: preset tuning; Manual presetting

RQT6707 Recording operations Cassette deck operations 7 The radio: manual tuning Preparation:Press [TUNER BAND] to select “FM” or “AM”. Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency where pre-setting is to begin. Hold down [PROGRAM] until the frequ...

Page 8 - Cassette deck operations; Set a CD in the tray.; ” indication; CD display; CDs; CD selection

RQT6707 Cassette deck operations 8 1 Press [ c , OPEN/CLOSE] to open the tray. The unit comes on. 2 Set a CD in the tray. (Label must face upward.) To continue loading CDs in the other traysPress [1]–[5] to select the required tray and press [ c , OPEN/ CLOSE] to open the tray.Press [ c , OPEN/CLOSE...

Page 9 - Only when you selected “1-SONG” in step 1; Starting play from a specific track; Program play; To clear the last track; Repeat play

RQT6707 Recording operations Cassette deck operations 9 To listen to specific CDs and tracks(CD Play Mode function) Remote control only Preparation: Press [ : / J , CD] and then [ L , CLEAR]. 1 Press [PLAY MODE] to select the desired mode. Every time you press the button: ALL-DISC 1-RANDOM 1-SONG 1-...

Page 10 - How discs with MP3/WMA differ from CDs; CD play mode function for MP3/WMA; Remote control only; When you selected “1-ALBUM” or “1-SONG” in step 1; When making MP3/WMA files to play on this unit; Limitations on MP3/WMA play

RQT6707 Cassette deck operations 10 Total number of albums(on the current disc) Total number of tracks(on the current disc) File format indicator How discs with MP3/WMA differ from CDs CD play mode function for MP3/WMA Remote control only Preparation: Press [ : / J , CD] and then [ L , CLEAR]. 1 Pre...

Page 11 - Album skip play; While your desired album is playing, press [; Program play for MP3/WMA; Joystick

RQT6707 Recording operations Cassette deck operations 11 Album skip play During play or stop Push the joystick up/down ([ALBUM /CHARA] or [ALBUM /CHARA]) to select the desired album. Remote control: Press [ALBUM ( or )]. When selecting in the stop mode: Press [ : / J , CD] to start play. Play starts...

Page 12 - DELETE

RQT6707 Cassette deck operations 12 How discs with MP3/WMA differ from CDs 1 1 1 1 1 P u s h t h e j o y s t i c k u p / d o w n ( [ A L B U M / C H A R A ] o r [ A L B U M / C H A R A ] ) t o s e l e c t t h e r e q u i r e d c h a r a c t e r . Each time you push the joystick up ([ALBUM /CHARA]), ...

Page 13 - CD display for MP3/WMA; To recall a marked track number in the current disc; Marking a track; To mark a track number; During play or stop; Select your desired track.; CD DISP

RQT6707 Recording operations Cassette deck operations 13 CD display for MP3/WMA Remote control only During play or pause Press [CD DISP] to select a desired CD display mode. Every time you press the button: a Remaining play time, Original spectrum analyzer display mode b Elapsed play time, Album tit...

Page 14 - DECK 2] and insert the; Cassettes; Front side; Select the source to be recorded.; Sound quality/sound field

RQT6707 14 You can use either deck 1 or deck 2 for tape playback. Use normal position tapes.High position and metal position tapes can be played, but the unit willnot be able to do full justice to the characteristics of these tapes. 1 Press [ : , TAPE]. The unit comes on.If a cassette was loaded, pl...

Page 15 - Recording; Optional antenna connections; External unit connections

RQT6707 15 To stop recordingPress [ L , STOP]. If the tape finishes before the CDThe CD continues playing. Press [ L , STOP] to stop it. To record on the other side of the tapeTurn the tape over and press [ a REC]. Reducing noise when recording AM Remote control onlyHold down [PLAY MODE] while recor...

Page 16 - Timer operations; Convenient functions

Timer operations RQT6707 16 A demonstration of the display is shown if you have not set the clock.You can reduce the power consumed in standby mode by turning it off. Hold down [-DISP/–DEMO] until “NO DEMO” is displayed. Every time you hold down the button:NO DEMO (off) ↔ DEMO ON (on) To show a demo...

Page 17 - To change the settings (when the unit is on); Using the sleep timer; While enjoying the desired source:; Using the play/record timer; The start and finish times are now set.; Using the timers

Timer operations RQT6707 Reference 17 To cancel the timerPress [SHIFT] + [ r PLAY/REC] to clear the timer indicator from the display.(The timer comes on at the set time everyday if the timer is on.) To change the settings (when the unit is on) To change the play/record timesDo steps 1, 2, 3 and 5.To...

Page 18 - Troubleshooting guide; Reference pages are shown as black circled numbers; Maintenance; Humming heard during play.

Timer operations RQT6707 18 Troubleshooting guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in thechart do not solve the problem:In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-...

Page 19 - Specifications

Timer operations RQT6707 Reference 19 Specifications AMPLIFIER SECTION SC-AK410 Power output THD 10%, both channels driven 60 Hz–3 kHz (Low channel) 58 W per channel (6 Ω ) 3 kHz–16 kHz (High channel) 58 W per channel (6 Ω ) Total Bi-Amp power 116 W per channel Power output THD 10%, both channels dr...