Panasonic SC-AK220 - Manuals

Panasonic SC-AK220 – Manual in PDF format online.

Manuals:

Manual

Manual Panasonic SC-AK220

Summary

Page 2 - Before using; Dear customer; System; Listening caution

Before using RQT7528 2 Dear customer Thank you for purchasing this product.For optimum performance and safety, please read these instructionscarefully. These operating instructions are applicable to the following system. System SC-AK220 Main unit SA-AK220 Speakers SB-AK220 CAUTION! DO NOT INSTALL OR...

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; Supplied accessories; Batteries; The remote control; Use

Before using RQT7528 3 Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructionslisted below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instruction...

Page 4 - AC power supply cord; AM loop antenna; Preparation; Speakers; Placement; Connection

RQT7528 4 4 AC power supply cord Note The included AC power supply cord is for use with this unit only.Do not use it with other equipment.For your referenceInformation you enter into the unit’smemor y, except for time, remains intact for up to a week after the AC power supply cord is disconnected. 2...

Page 5 - Front panel controls

Before using RQT7528 5 1 AC supply indicator [AC IN]This indicator lights when the unit is connected to the AC powersupply. 2 Standby/on switch [ f f f f f /I, POWER] Press to switch the unit from on to standby mode or vice versa. Instandby mode, the unit is still consuming a small amount of power. ...

Page 6 - Disc information; CD selection; When making MP3 files to play on this unit; MP3 information; CDs

RQT7528 6 Disc information Disc type Logo Indication usedin instructions Audio CD CD CD-R/RW – CD MP3 (Depending on therecording format A see above) Do not: • use irregularly shaped CDs. • attach extra labels and stickers. • use CDs with labels and stickersthat are coming off or withadhesive exuding...

Page 7 - Track skip play; Album skip play; Starting play from a specific track

RQT7528 7 1 Press [ c , OPEN/CLOSE] to open the tray. The unit comes on. 2 Set a CD in the tray. (Label must face upward.) To continue loading CDs in the other traysPress [1]–[5] to select the required tray and press [ c , OPEN/ CLOSE] to open the tray.Press [ c , OPEN/CLOSE] to close the tray. 3 Pr...

Page 8 - Repeat play; Remote control only; Program play; Remote control only

RQT7528 8 CDs To listen to specific CDs and CD MP3 tracks (CD Play Mode function) a ALL-DISC: Plays all loaded discs in succession from theselected disc to the final disc . b 1-SONG: Plays one selected track on the selected disc. c 1-ALBUM: MP3 Plays one selected album on the selected disc. d 1-RAND...

Page 9 - Title search function

RQT7528 9 To recall a marked track number in the current disc During play or stop Press [MARKER] to recall a marker. Play starts from the track recalled. Note • “NO MARKER” indicates that the marker in the current disc is empty. • The marker memory is cleared when you open the CD tray. • For CD-DA, ...

Page 10 - Manual tuning; Radio

RQT7528 10 Remote control only There are two methods of pre-setting stations.Automatic presetting : All the stations the tuner can receive are preset.Manual presetting : You can select the stations to preset and the order they are preset in. Up to 15 stations each can be set in the FM and AM bands. ...

Page 11 - DECK 2] and insert the; Front side; Select the source to be recorded.; Playback; Reducing noise when recording AM; Erasure prevention; Enhancing the sound quality; Sound quality/sound field; Cassettes

RQT7528 11 You can use either deck 1 or deck 2 for tape playback. Use normal position tapes.High position and metal position tapes can be played, but the unit willnot be able to do full justice to the characteristics of these tapes. 1 Press [ : , TAPE]. The unit comes on.If a cassette was loaded, pl...

Page 12 - Using an external unit; Turning the demo function on/off; Other functions; Setting the time

RQT7528 12 Using an external unit (See page 4 for external unit connection.) 1. Press [AUX].The unit comes on. 2. For listening: Proceed to step 3.For recording: Press [ a , REC] (recording starts). 3. Start playback from the external source. (For details, refer to theexternal unit’s instruction man...

Page 13 - Using the sleep timer; Using the play/record timer; To change the settings (when the unit is on); Timers

Timer operations RQT7528 Reference 13 To check the settingsPress [SHIFT] + [CLOCK/TIMER] while the unit is on to select “ r PLAY” or “ r REC”. The settings are shown in the following order:Play timer: on time → off time → source → volume Record timer: on time → off time → source To check the setting...

Page 14 - Optional antenna connections

RQT7528 14 CASSETTE DECK SECTION Track system 4 track, 2 channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erasing system AC erase 100 kHz Tape speed 4.8 cm/s (1 7 / 8 ips) Overall frequency response(+3 dB, –6 dB ...

Page 15 - Troubleshooting guide; Maintenance

Timer operations RQT7528 Reference 15 Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated inthe chart do not solve the problem, refer to the “Customer Services Directory” on the back cover if you...

Page 16 - Panasonic Canada Inc.; Panasonic/Technics Audio Products; Customer Services Directory

16 RQT6351 Panasonic Consumer ElectronicsCompany, Division of MatsushitaElectric Corporation of America One Panasonic Way Secaucus,New Jersey 07094http://www.panasonic.com Panasonic Sales Company,Division of Matsushita Electric ofPuerto Rico, Inc. (“PSC”) Ave. 65 de Infantería, Km. 9.5San Gabriel In...