Panasonic PT-F200NTU/PT-FW100NTU - Manuals

5 Notes on Using Wireless Connection (cont.) Channels that can be used The channels (frequency range) that can be used differ according to the country or region. Refer to the table below. Country or region Standard Channels used Frequency band (Center frequency) Japan ARIB STD-T66 1 - 13 2,412 MHz -...

6 Request Regarding Security When using this product, be sure to implement sufficient security measures as security breaches of the type described below are conceivable. Possible Security Breaches • Leakage of your private information via this product• Illegal operation of this product by a maliciou...

7 What you can do with Wireless Manager mobile edition 4.5 Network Transmission You can connect the projector to a computer via the wireless LAN or the wired LAN, and send moving and still images.Refer to page 11 for details on how to connect. <Live mode> (See page 22) Used for normal presenta...

8 Check your computer • First, check your computer to see whether or not it has a wired LAN or a built-in wireless LAN ※ function. ※ LAN : “Glossary” (See page 44) • Before connecting the projector to the computer, be sure to check the following settings.• Operation is not guaranteed for all wireles...

9 Software Installation The computer must meet the following requirements in order to use the supplied software. OS: Mac OS X v10.4Mac OS X v10.5 ※ CPU: 800 MHz PowerPC G4 or faster, or 1.8 GHz Intel Core processor or faster RAM: 256 MB or more (512 MB or more recommended) Empty hard disk capacity: ...

10 Set the provided CD-ROM into the CD/DVD-ROM drive. Contents on Provided CD-ROM • Quit all running programs. Otherwise, installation may not be possible.• [Admin (administrator)] authority is required for installation. This software is used to send screen images from a computer to the projector vi...

11 Connecting with wireless LAN 1 Click the install target or [ ] in the Dock. Detailed settings Select the projector to connect from the computer. • For details on how to connect, refer to page 17.• Only the built-in adapter appears on the <Network Adapter Selection> window. When the <Netw...

14 Connecting with wireless LAN (cont.) Connection error messages If a wireless LAN connection cannot be established, click the [ ] button in the bottom left of the <Select Access Port> window to display information on resolving the issue as shown below.

15 You can make the setting for infrastructure mode ※ (connection through the access point ※ ); however, confirm to your system administrator on network settings before changing any settings. ※ “Glossary” (See pages 44 - 45) ヂ Projector settings 1 Turn on the projector and press the [NETWORK] button...

16 Connecting with Wired LAN Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing any settings. ヂ Projector settings 1 Turn on the projector and press the [NETWORK] button on the remote control. 2 Select [WIRED LAN] at the network m...

17 Selecting the connection method When the <Network Adapter Selection> window appears, select [Wireless LAN] or [Wired LAN] and click [OK]. [Wireless LAN]: The wireless adapter is used for the connection. [Wired LAN]: The wired LAN is used for the connection. The <Select Access Port> wi...

18 Other operations for connection ※ “Glossary” (See page 44) The newly registered connection is added to the connection list in the window shown in step 1. Click [ADD] and enter the IP address ※ (including its periods) of the connection to be added, and then click [REGISTER]. 2 Click [Designate] at...

19 Other operations for connection (cont.) Even if there are two or more projectors with the same name, an ID ([Proj] + 4-digit number) is assigned to each projector to enable the projectors to be identified. When you click [ID Search], a search for the projector of the specified ID is carried out f...

20 Click [ ] in the menu bar, followed by [Quit Wireless Manager]. The following window appears. 1 Click [Yes]. The computer returns to the original network settings when the connection is ended.However, note that some time may be needed to return to the original network settings.Click [No] to retur...

21 Operations are performed from the menu.• Clicking [ ] in the menu bar displays the menu. Menu description Various projection methods Status Menu Status indication Status : Indicate the connecting status.   (Green, lit): Transmission possible   (Blue, lit): Own computer currently transmitting (Whe...

22 Various projection methods (cont.) Check the status indication in the menu bar to make sure that transmission is possible (check that the green lamp is lit). 1 Click [Live Mode] from the menu. The current computer screen is transmitted to the selected projector. In the live mode the projector is ...

23 Useful Functions Blanks the screen for a moment. Click [Shutter function] from the menu. The image is turned off. 1 Click [Shutter function] from the menu again. The image comes back. 2 Shutter function The shutter function is available in the live mode.

24 You can make various settings related to Wireless Manager ME 4.5. Setting options Setting option window Click [OPTION...] from the menu. The <Option> window shown to the right appears. 1 Click the desired tab to be set. 2 Click [OK]. 3 Resolution Select the quality of the image transmitted ...

25 You can set shortcut key combinations that let you control the Wireless Manager ME 4.5 functions by computer keyboard operations. Key setting Select the mode or the function to be set for the shortcut key, and click it. 1 Click one from [Cmd], [Alt], [Ctrl], and [Shift]. 2 Select one alphabet to ...

26 Setting options (cont.) • If the [Make an automatic connection] box is checked and a projector is registered as a destination for automatic connection when Wireless Manager ME 4.5 is started, <Select Access Port> window does not appear and connection is performed automatically. • When [Sett...

27 Network setting of the projector When making a connection between a computer and a projector with settings other than the default settings, perform the procedure below to display the menu required when changing the initial settings. Select [NETWORK] with the [ Ÿź ] buttons. The network menu appea...

28 You can make detailed wired LAN settings. Select [WIRED LAN] at the network menu and click the [ENTER] button. DHCP ※ : ON : If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired. OFF : If a DHCP server does not exist in the netw...

29 Select [WIRELESS LAN] at the network menu. 1 Select the number to be connected with the [ ] buttons. 2 PT-FW100NT RETURN SELECT ENTER LANGUAGE OPTION SECURITY NETWORK POSITION PICTURE USER1 OFF ON WIRED LAN WIRELESS LAN NAME CHANGE INPUT PASSWORD PASSWORD CHANGE NETWORK STANDBY WEB CONTROL LIVE M...

30 Network setting of the projector (cont.) Select [NEXT] on the IP address setting window to switch to the wireless setting window. Make the settings related to the wireless connection between the projector and the network. Wireless settings WIRELESS DETAILED SETUP NEXT CANCEL RETURN RETURN SELECT ...

32 Network setting of the projector (cont.) You can change the projector name on the network.It makes easy to recognize projectors in <Select Access Port> window. Select [NAME CHANGE] at the network menu and press the [ENTER] button. 1 PT-FW100NT RETURN SELECT ENTER LANGUAGE OPTION SECURITY NE...

33 Enter the password using the [ Ÿź ENTER] buttons. 4 After entering the password, select [OK] and click [ENTER]. To cancel the change, select [CANCEL] and press the [ENTER] button. 5 PASSWORD CHANGE A B C D E F G H I J K L M Na Ob Pc Qd Re Sf Tg Uh V i W j Xk Y l Zm n 1 o 2 p 3 q 4 r 5 s 6 t 7 u 8...

34 Select [STATUS] at the network menu and press the [ENTER] button. Your current settings appear. Verifying settings PT-FW100NT USER1 RETURN ENTER SELECT LANGUAGE OPTION SECURITY NETWORK POSITION PICTURE WIRED LAN WIRELESS LAN NAME CHANGE INPUT PASSWORD PASSWORD CHANGE NETWORK STANDBY WEB CONTROL O...

35 Using WebBrowser Select [WEB CONTROL] at the network menu. 1 Select [ON] or [OFF] with the [ ] buttons. ON : This enables control on the WebBrowser. OFF : This disables control on the WebBrowser. 2 Control a projector through the WebBrowser of a computer. It is called “WEB Control”.(This example ...

36 Using WebBrowser (cont.) Enabling JavaScript If JavaScript has been set to disable, enable it. 2 Place a checkmark in the [Enable JavaScript] checkbox next to Web Content. Open the [Security] tab in Safari. 1 Accessing from the WebBrowser <Top window> 1 Select [WEB control] from the menu. T...

37 Using WebBrowser (cont.) This page indicates the projector status. To access this page from other pages, click [Status] at the left of the window. Monitor information window The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [View...

38 You can make various projector settings. To access this page from other pages, click [Projector control] at the left of the window. Projector control window Basic control window On this window, click the [Basic control] tab. Advanced control window On this window, click the [Advanced control] tab...

39 Using WebBrowser (cont.) 3 Complete the detailed settings and click [NEXT]. When [NEXT] is clicked, the next page appears, enabling you to complete the detailed settings as desired.After all required items have been entered, a confirmation window appears. Making the above settings effective Selec...

40 Using WebBrowser (cont.) Time settings Click [Detailed set up] ĺ [Adjust clock] in the menu. Time zone : Select the time zone and click [Set time zone]. Time : Enter the current date and time in [Date] and [Time], and then click [Set date and time]. Email settings You can specify two email recipi...

41 Using WebBrowser (cont.) ※ Example of email message sent If [NORMAL] is selected under [MAIL CONTENTS] ヂ If you have completed the email settings ッ If an error occurs If [SIMPLE] is selected under [MAIL CONTENTS] ヂ If you have completed the email settings ッ If an error occurs

42 Using WebBrowser (cont.) Password settings Click [Detailed set up] ĺ [Change password] in the menu. Set a password for access of the [Projector control window]. Enter the previous password and the new password. Enter the new password in [Retype] and click [OK]. Authentication server settings Clic...

43 Software Uninstall Wireless Manager ME 4.5 2 Select [Empty Trash...] from the [Finder] menu. Drag-and-drop [ ] from the [Applications] folder to the [Trash]. 1

44 Glossary Category Item Descriptions Page CommonSetting of connections LAN Abbreviation for Local Area Network. This is a network with a relatively narrow range such as inside a company. 8 Access point These are stations for relaying electromagnetic signals between computers in a wireless LAN. Whe...

46 Frequently Asked Questions Check the following points once more before requesting repair. No wireless connection can be made between my projector and my computer. • Is Wireless Manager ME 4.5 running? Wireless Manager ME 4.5 must be started in the computer in order to enable wireless transmission...

Trademarks Matsushita Electric Industrial Co., Ltd. Web Site: http://panasonic.net © 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. TQBH0186-2 (E/U/EA) M0707-1127 Notes: • Unauthorized use or reproduction of part or all of this product software and manuals is strictly prohibited....