Panasonic PT-D7700E - Manuals
Panasonic PT-D7700E – Manual in PDF format online.
Manuals:
Manual Panasonic PT-D7700E
Summary
2 Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will helpyou to get the most performance out of your new product, and that you will be pleased with your Panasonic DLP TM based projector.The serial number of your ...
4 Adjusting the position .............................................51 Shift adjustment...............................................................51Size adjustment ...............................................................52Clock phase adjustment .............................................
5 ENGLISH Precautions with regard to safety WARNING If a problem occurs (such as no image) or if you notice smoke or a strange smell comingfrom the projector, turn off the power and disconnect the power cord from the wall outlet. • Do not continue to use the projector in such cases, otherwise fire o...
6 Precautions with regard to safety Do not place liquid containers on top of the projector. • If water spills onto the projector or gets inside it, fire or electric shocks could result. • If any water gets inside the projector, contact an Authorized Service Centre. Do not insert any foreign objects ...
7 ENGLISH Accessories Check that all of the accessories shown below have been included with your projector. Do not look into the lens while the projector is being used. • Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes. Do not...
8 Precautions on handling Precautions on transport The projection lens is susceptible to vibrations andimpacts. Be sure to always remove the lens duringtransport. Precautions on installation Be sure to observe the following precautions wheninstalling the product. Avoid installing the product in a pl...
ENGLISH 9 The projector is provided with a number of terminals and optional accessories to enable various system expansions.Both input and output are provided to all terminals on the main unit.The following are some examples of system expansion: Examples of system expansion System 1 Stacking two pro...
10 Name and function of parts < When the operation mode selector is set to Projector > Remote control operation indicator lamp The lamp flashes when any remote control buttonis pressed. POWER ON button (page 33) Turns on the power if the MAIN POWER has beenput to the “l” position. POWER OFF bu...
11 ENGLISH LIGHT button ( Click button) When this button is pressed, the remote controlbutton light is turned on.The light goes off about 30seconds after you stop remote control operation. USER button Displays the sub-memory screen of the signalregistration. ID ALL button (pages 16, 64) When two or ...
12 Side-mounted connection terminals (page 14) AC IN terminal (page 33) Connect the supplied line power cord into thisreceptacle.Do not connect any other cable to this socket. MAIN POWER switch (page 33) Use this switch to turn on “I” and off “ o ” the commercial line power applied to the projector....
13 ENGLISH Lamp unit cover The lamp unit is housed. Remote control receiver window (rear) (page 15) This also receives the signal beam coming fromthe remote control. POWER ON (I) button (page 33) Turns on the power. POWER OFF ( ) button (page 34) Turns off the power. AUTO SETUP button (page 37) Pres...
ENGLISH 15 Loading dry cells When loading supplied AA dry cells into the batterycompartment of the remote control, make sure thattheir polarities are correct. 1. Open battery compartment lid. Open the lid in the order of steps and . 2. Insert the dry cells. Into battery compartment, with their polar...
16 Every projector has its ID number and the ID number of the controlling projector must be set to the remote controlin advance so that the user can operate the remote control. The ID number of the projector is set to “ALL” on shipping, and use the ID ALL button of the remote control when using only...
17 ENGLISH Using the remote control as a PC mouse Operation mode selector switch Put the knob to the Computer position. • ENTER button Pressing the front, rear, left and right edges of thebutton moves the mouse cursor up, down, left andright. • Right click ( ) button This button can be used as the r...
18 Projection scheme This projector can use any of the four projectionschemes shown at right. Select the scheme that bestsuits your particular installation location. Select themost suitable scheme to the situation of your location.Use the OPTION menu on the menu screen to choosethe desired projectio...
ENGLISH 19 L : Projection distanceSH : Effective screen height Projection distances by the type of projection lenses (for PT-D7700E) • For the screen aspect ratio of 4:3 Units: m • The projection distances listed here involve an error of ±5%.• Keystone distortions are corrected in the way the screen...
22 Connection Before connection, read carefully the instruction manual for the device to be connected. Turning off the power switch of the devices before connecting cables. If any connection cable is not supplied with the device, or if no optional cable is available for connection of thedevice, prep...
23 ENGLISH SERIAL S-VIDEO VIDEO REMOTE 1 RGB 1 IN IN IN IN OUT OUT OUT SYNC/HD VD B/P B G/Y REMOTE 2 R/P R RS-232C (G) / RS-422 (R) RS-232C (G) / RS-422 (R) IN RGB 2 IN Video deck (TBC built-in) High-vision video deck Control PC Colour monitor Red (connected to P R terminal) Blue (connected to P B t...
24 SERIAL S-VIDEO VIDEO REMOTE 1 RGB 1 IN IN IN IN OUT OUT OUT SYNC/HD VD B/P B G/Y REMOTE 2 R/P R RS-232C (G) / RS-422 (R) RS-232C (G) / RS-422 (R) IN SERIAL S-VIDEO VIDEO REMOTE 1 RGB 1 IN IN IN IN OUT OUT OUT SYNC/HD VD B/P B G/Y REMOTE 2 R/P R RS-232C (G) / RS-422 (R) RS-232C (G) / RS-422 (R) IN...
25 ENGLISH SERIAL S-VIDEO VIDEO REMOTE 1 RGB 1 IN IN IN IN OUT OUT OUT SYNC/HD VD B/P B G/Y REMOTE 2 R/P R RS-232C (G) / RS-422 (R) RS-232C (G) / RS-422 (R) IN SERIAL S-VIDEO VIDEO REMOTE 1 RGB 1 IN IN IN IN OUT OUT OUT SYNC/HD VD B/P B G/Y REMOTE 2 R/P R RS-232C (G) / RS-422 (R) RS-232C (G) / RS-42...
26 SMPTE259M compliant : 480i, 576i 10BASE-T/100BASE-TX SMPTE259M compliant : 480i, 576i SMPTE292M compliant : 720/60p, 720/59.94p, 720/50p 1 035/60i, 1 035/59.94i, 1 080/60i, 1 080/59.94i 1 080/50i, 1 080/24sF, 1 080/23.98sF, 1 080/30p 1 080/29.97p, 1 080/25p, 1 080/24p, 1 080/23.98p 10BASE-T/100BA...
27 ENGLISH Procedure of installation Disconnect the power before installing the input module. Slot cover Remove 2 screws. Input module Slot Tighten the two screws. Remove the slot cover. Insert the input module. Fix the input module. Register the input signal. This projector needs to register the ty...
28 SD-SDI input module ET-MD77SD1 DVI-D input module ET-MD77DV Network module ET-MD77NT SDI signal DVI signal LAN10BASE-T/100BASE-TX Projector High-vision video deck DVD player Business digital VCR PC HD/SD-SDI input module ET-MD77SD3 Connecting signals to the input module When installing the projec...
29 ENGLISH SD-SDI ModuleET-MD77SD1 IN SERIAL OUT LAN SD-SDI signal SD-SDI signal output (active through) LAN terminal (10BASE-T / 100BASE-TX) Business digital VCR For details on the network function, refer to page 82. SD-SDI input module (optional) ET-MD77SD1 (for 480i/576i) • Insert the input modul...
30 Installation of input module (optional) • Insert the input module that meets the input signal specifications.• Normally, use SYSTEM SELECTOR in “AUTO”.• Any of the format systems can be selected using the SYSTEM SELECTOR button which supports 9 types (15 formats) of HD signal standards (SMPTE292M...
31 ENGLISH D V I - D i n p u t m o d u l e ( o p t i o n a l ) E T - M D 7 7 D V DVI ModuleET-MD77DV DVI-D IN LAN DVI-D signal DVD player or high-vision video deck equipped with DVD/HDMI terminal PC with DVI output LAN terminal (10BASE-T / 100BASE-TX) For details on the network function, refer to pa...
32 How to install and remove the projection lens (optional) How to install theprojection lens While pressing the lock button on theprojection lens cover, pull the coverforward to remove it. Pull and remove the dustproof sheet onthe back of the projection lens cover. Align the mark (orange) on thepro...
ENGLISH 33 Powering up the projector Connect the supplied power cable. (220 V–240 V~, 50 Hz/60 Hz) Press the “I” marked side of the MAINPOWER switch to turn on the power. The power indicator lamp on the projector will flashin red. After a short period, the indicator willilluminate and the projector ...
34 Powering off the projector Press the POWER OFF “ ” button. Select “OK” with or button and press the ENTER button.(or press the POWER OFF “ ” button again.) The projection of the image stops, and the powerindicator lamp of the main unit lights up orange.(The cooling fan keeps running.) Wait until ...
ENGLISH 35 If the focusing, zooming or positioning of the image projected on the screen is not successful, even though theprojector is properly positioned against the screen, you can adjust the focus, the zoom, or the vertical or horizontalposition of the image. Do not move the lens beyond the bound...
36 How to adjust the lens If the image is out of focus in any portion of the screen, adjust the lens by turning the adjustment screws to obtainevenness of focusing. How to adjust the lens for addressing unevenness of focusing Remove the lens cover and lens (Refer to page 32). Loosen the three fixing...
38 Registration of input signal data • The data of 96 input signals can be registered.• The signals supporting the installed input module are input and their data registered.• The memories are numbered over 12 pages (A to L: 8 data items can be registered on each page), and the data is registered in...
39 ENGLISH Clearing the data of registered signals Press the “MENU” button. The MAIN MENU screen will be displayed. Select “SIGNAL LIST” with the and buttons. Press the “ENTER” button. The REGISTERED SIGNAL LIST screen will bedisplayed. The memories extend over 12 pages (Ato L with 8 data items each...
40 Registration of input signal data Sub memory The projector is provided with a sub memory function to register plural pieces of image adjustment data even theyare determined to be the same signal by the frequency and form of the synchronization signal source.Use this function when the user needs a...
41 ENGLISH On-screen indications Input switching / signal switchingThis shows the registered signal name on the status screen for signal switching. The designation can be set by the sub memory items. The place in which address code(A1, A2, ..., H7 and H8) signals areregistered displays the submemory...
42 Using the FREEZE function Pressing the “FREEZE” button of the remote control switches between a still image and a motion image. If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter modeis available that allows the user to hide images te...
ENGLISH 43 Structure of menu screens Menus are extensively used for configuring, adjusting or reconfiguring the projector.The menus structure is as follows: MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECTENTER:SUB MENU PICTURE PICTURE MODE DYNA...
44 On-screen menus Basic operations on menuscreen Press the “MENU” button. The MAIN MENU appears on the screen. Select the desired item with the or button. Selected items are displayed in blue. Press the “ENTER” button to establishyour selection. The submenu for the selected option will nowopen. (Ex...
ENGLISH 45 Adjusting the picture Switching the picture mode The user can switch to the desired picture mode suitable for the image source and the environment in which thisprojector is used. PICTURE PICTURE MODE DYNAMIC COLOR 50 TINT 30 COLOR TEMP. DEFAULT GAMMA 2.2 CONTRAST 32 BRIGHT 32 SHARPNESS 6 ...
47 ENGLISH PICTURE PICTURE MODE DYNAMIC COLOR 50 TINT 30 COLOR TEMP. DEFAULT GAMMA 2.2 CONTRAST 32 BRIGHT 32 SHARPNESS 6 NOISE REDUCTION 2 DYNAMIC IRIS 1 MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECTENTER:SUB MENU SAVE AS DEFAULT SETTING FOR ...
48 Adjusting the picture DYNAMIC IRIS AUTO IRIS 2 MANUAL IRIS OFF DYNAMIC GAMMA 1 :MENU SELECT :CHANGE 2 3 1 D Y N A M I C I R I S U S E R O F F DYNAMIC IRIS setting Pictures with the optimum contrast will be displayed by automatically providing aperture compensation and signalcompensation to suit t...
49 ENGLISH PICTURE PICTURE MODE DYNAMIC COLOR 50 TINT 30 COLOR TEMP. DEFAULT GAMMA 2.2 CONTRAST 32 BRIGHT 32 SHARPNESS 6 NOISE REDUCTION 2 DYNAMIC IRIS 1 :MENU SELECT :CHANGE Press the “MENU” button. The MAIN MENU screen will be displayed Select “PICTURE” with the buttons. MAIN MENU PICTURE POSITION...
50 Adjusting the picture Press the “MENU” button. The MAIN MENU screen will be displayed. Select “PICTURE” with the buttons. Press the “ENTER” button. The PICTURE screen will be displayed. Select desired one of the items in thefollowing table with the buttons. Switch the setting with the buttons. Re...
51 Adjusting the position ENGLISH Desired position can be achieved by following the procedure below. Shift adjustment This function allows the user to adjust the picture position vertically or horizontally if the position of the imageprojected on the screen is displaced when the projector is properl...
52 Adjusting the position POSITION SHIFT SIZE DEFAULT CLOCK PHASE 0 KEYSTONE :MENU SELECT :CHANGE ENTER:SUB MENU Press the “MENU” button. The MAIN MENU screen will be displayed. Select the “POSITION” with the buttons. MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST ...
53 ENGLISH Some size modes are not available for certain types of input signals. • For RGB1 and RGB2 input signals: VID AUTO, S1 AUTO or VID AUTO (PRIORITY) cannot be selected.• For VIDEO input signals: DEFAULT, S1 AUTO or VID AUTO (PRIORITY) cannot be selected.• For an NTSC signal with VIDEO or S-V...
54 Adjusting the position POSITION SHIFT SIZE DEFAULT CLOCK PHASE 0 KEYSTONE :MENU SELECT ENTER:SUB MENU MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECTENTER:SUB MENU KEYSTONE KEYSTONE 63 LINEARITY 63 :ADJUST Keystone distortion correction Keys...
55 How to use ADVANCED MENU ENGLISH • In DIGITAL CINEMA REALITY mode, the image quality will be deteriorated if 30p FIXED or 25p FIXED is selected when the signal is not a 2:2 pulldown signal. Note ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE B...
56 How to use ADVANCED MENU ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING OFF SYNC.TERM 75 RASTER POSITION :MENU SELECTENTER:SUB MENU Press the “MENU” button. The MAIN MENU screen will be displayed. Select the “ADVANCED MENU” withthe bu...
57 ENGLISH ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING OFF SYNC.TERM 75 RASTER POSITION :MENU SELECTENTER:SUB MENU MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECTENTER:SUB MENU I...
58 How to use ADVANCED MENU ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING OFF SYNC.TERM 75 RASTER POSITION :MENU SELECTENTER:SUB MENU MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELEC...
59 ENGLISH ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING ON SYNC.TERM 75 RASTER POSITION :MENU SELECT :CHANGE ENTER:SUB MENU MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY EDGE BLENDING UPPER ...
60 How to use ADVANCED MENU BRIGHT ADJUST BRIGHT INSIDE 6 BRIGHT OUTSIDE 6 UPPER 0 LOWER 0 LEFT 0 RIGHT 0 Projection range Edge blending width (right) BRIGHT adjustment (right) Marker BRIGHT INSIDE BRIGHT OUTSIDE Select the “BRIGHT ADJUST” with the buttons. Press the ENTER button. The BRIGHT ADJUST ...
61 ENGLISH ADVANCED MENU DIGITAL CINEMA REALITY AUTO FORMAT SMPTE BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING OFF SYNC.TERM 75 RASTER POSITION RASTER POSITION V: 0 H: 0 MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY Raster position When the whol...
62 Changing the display language • The on-screen display of the projector is set to the English language on shipping. Note Press the “MENU” button. The MAIN MENU screen will be displayed. Select the “LANGUAGE” with the buttons. LANGUAGE ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO :SELECT ENTER:SET MAI...
ENGLISH 63 How to change the system format Pressing the SYSTEM SELECTOR button on the remote control or using the menu screen operation (page 81)enables the user to make the following changes depending on S Video / Video input or the currently selected inputmodule.The name of the selected system suc...
64 Option settings OPTION PROJECTOR ID 2 SETTING FRONT-F LAMP SELECT DUAL LAMP POWER HIGH RS232C SETTING OSD POSITION 2 SYSTEM INFORMATION COLOR MATCHING OFF VIDEO SETTING AUTO SETUP :MENU SELECT :CHANGE MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU...
65 ENGLISH A: Floor mount front projection (Front – Floor mount) D: Ceiling mount rear projection (Rear – Ceiling mount) C: Floor mount rear projection (Rear – Floor mount) B: Ceiling mount front projection (Front – Ceiling mount) Select the setting by displaying the on-screen indications using butt...
66 Option settings Lamp select Two internal lamps in the projector can be used eitherin “DUAL” or “SINGLE” mode depending on user'sneeds or viewing conditions.In the “SINGLE” mode, the projector may automaticallyswitches between one lamp and the other, or one ofthe lamps can be specified. “LAMP 1”: ...
67 ENGLISH Position of on-screenindications The user can specify the position of the on-screenindications “1”: Top left of the screen“2”: Left centre of the screen“3”: Bottom left of the screen“4”: Top centre of the screen“5”: Centre of the screen“6”: Bottom centre of the screen“7”: Top right of the...
68 Option settings Adjusting colour matching When multiple sets are used simultaneously, this projector allows the user to correct the difference of coloursamong the sets. Procedure of adjustment OPTION PROJECTOR ID 2 SETTING FRONT-F LAMP SELECT DUAL LAMP POWER HIGH RS232C SETTING OSD POSITION 2 SYS...
69 ENGLISH MEASURE MODE MEASURED DATA TARGET DATA AUTO TESTPATTERN ON :MENU SELECTENTER:SUB MENU MEASURE MODE MEASURED DATA TARGET DATA AUTO TESTPATTERN ON MEASURE MODE MEASURED DATA TARGET DATA AUTO TESTPATTERN ON TARGET DATA R, G, B Cy, Mg, Ye, Wh TARGET DATA: R, G ,B R x 0.630 y 0.340 G x 0.310 y...
70 Automatic adjustment (Only for RGB input) Use this setting when adjusting a specific or oblong(16:9, etc.) signal. Press the MENU button. The MAIN MENU screen will be displayed. Select “OPTION” with the buttons. Press the ENTER button. The OPTION screen will be displayed. Using the buttons, selec...
71 ENGLISH Fan control When using the projector over 1 400 m above sealevel, set to “HIGHLAND”. F A N C O N T R O L N O R M A L H I G H L A N D OPTION OUTPUT RESOLUTION SXGA+ AUTO SIGNAL ON FAN CONTROL NORMAL P IN P OFF FUNC1 P IN P DVI EDID EDID2 (PC) PASSWORD :MENU SELECT :CHANGE OPTION OUTPUT RES...
72 Option settings P IN P This item is used to set the condition of the Picture-In-Picture. Main window Subwindow Use the buttons to select "OFF", "USER 1", "USER 2", or "USER 3". When selecting an option other than "OFF", thesubmenu can be displayed by pressi...
ENGLISH 73 Setting FUNC1 The user can specify the function of the “FUNC 1”button on the remote control. “P IN P”: Enables setting of P IN P to OFF,USER 1, USER 2, or USER 3.(refer to page 72). “LAMP POWER”: Enables the lamp power to be switched between high and low(refer to page 66). “SIZE”: Enables...
74 Pin assignments and signal names The main unit is equipped with SERIAL terminals located in its terminal section on the side, and this terminal iscompliant with RS-232C. Also a serial output terminal is provided to enable plural projector control. Examples of connection Single projector Plural pr...
75 ENGLISH Control commands When controlling the projector from a computer, the following commands are available: Cable specifications • To connect the computer to the SERIAL terminal, prepare an adequate communication cable that fits to your personal computer. Attention Power “ON” Power “OFF” Switc...
76 Using the REMOTE 2 terminal provided on the side of the main unit, it is possible to operate the projector from acontrol panel etc. furnished in a distant location where infrared remote control signal cannot be received. Pin assignments and control Be sure to short-circuit Pins and when controlli...
ENGLISH 77 Displaying the internal test pattern The projector has eight types of internal test patterns to check the condition of the set.To display test patterns, follow the steps below. • Results of adjustment on the image, picture quality, position, size and other factors will not be reflected in...
78 Setting the security MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY :MENU SELECTENTER:SUB MENU PASSWORD :INPUT ENTER:SET SECURITY PASSWORD OFF PASSWORD CHANGE TEXT DISPLAY OFF TEXT CHANGE :MENU SELECT :CHANGE SECURITY PASSWORD OFF PASSWORD CHANGE TEXT D...
79 ENGLISH SECURITY PASSWORD OFF PASSWORD CHANGE TEXT DISPLAY OFF TEXT CHANGE SECURITY PASSWORD OFF PASSWORD CHANGE TEXT DISPLAY OFF TEXT CHANGE SECURITY PASSWORD OFF PASSWORD CHANGE TEXT DISPLAY OFF TEXT CHANGE TEXT PASSWORD NEW CONFIRM :INPUT ENTER:SET Select “TEXT DISPLAY” with the buttons. Selec...
80 How to use CP OPTION MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY CP OPTION :MENU SELECTENTER:SUB MENU CP OPTION OSD ON SYSTEM SELECTOR :MENU SELECT :CHANGE The on-screen indication can be turned “ON” or “OFF” and the system selector setting can be ch...
81 ENGLISH MAIN MENU PICTURE POSITION ADVANCED MENU LANGUAGE OPTION TEST PATTERN SIGNAL LIST SECURITY CP OPTION :MENU SELECTENTER:SUB MENU CP OPTION OSD ON SYSTEM SELECTOR :MENU SELECT :CHANGE SYSTEM SELECTOR VIDEO AUTO1 S-VIDEO AUTO1 :MENU SELECT :CHANGE ENTER:EXECUTE Setting the system format Proc...
83 ENGLISH Press the “ENTER” button. The OPTION screen will be displayed. Select “NETWORK SETTING” with the buttons. Initial setting of network function Procedure of setting Press the “MENU” button. The MAIN MENU screen will be displayed. Select “OPTION” with the buttons. MAIN MENU PICTURE POSITION ...
84 How to use network function (optional) Items Function Description HOSTNAME DHCP IP ADDR PORT No. NET MASK GATEWAY MAC ADDR Make alteration if necessary when to use the DHCP server. Set the DHCP item to ON when to acquire an IP address automatically using the DHCP server. Set to OFF if DHCP server...
85 ENGLISH • Avoid activating two or more Web browser simultaneously to work out setting or control actions.• Change the password first of all. Note Accessing from the Web browser Activate the Web browser in the personal computer. Enter the IP address set by the projector into the URL input field of...
86 How to use network function (optional) Basic control page This page is the first page displayed when the projector is accessed through a web browser.To move from another page, click [Projector control], then [Basic control]. Control button Click this item, and aprojector control pageappears. Upda...
87 ENGLISH (Continued on next page) Detail control page Click [Projector control], then [Detail control] to display the Detail control page. On-screen status isdisplayed, even if theon-screen of projectoris set to off. Lens adjustment Menu display Test pattern display This button updates theon-scree...
88 How to use network function (optional) When is displayed on the status information screen, click it to display the error details. Error information page OK: Normal operation FAILED: Occurrence of trouble When [FAILED] has appeared for an item Parameter MAIN CPU BUS FAN OPTICS MODULE TEMPERATURE I...
90 How to use network function (optional) Enter the E-mail address towhich the E-mail is to be sentwhen two E-mail addressesare going to be used. Do notenter it when the second E-mail address is not going tobe used. Select the conditions for sending E-mail. Error: an error is detected by self-diagno...
92 Subject: Panasonic projector report(CONFIGURE) === Panasonic projector report(CONFIGURE) ===Projector Type : D7700 – – – – – E-mail setup data – – – – –TEMPERATURE WARNING SETUP MINIMUM TIME at [ 60] minutes interval INPUT AIR TEMPERATURE Over [ 35C / 95F ] ERROR [ ON ] LAMP1 RUNTIME [ OFF ] at R...
93 ENGLISH Adjust clock page Click [Network set up], then [Adjust clock] to display the Adjust clock page. Time zone selection Button to update time zonesetting Button to update time anddate settings New date field New time field Network config page Set this to ON to enable theDHCP client function. ...
94 Firmware update page (The firmware should be updated only by an individual with the specialized knowledge required to do this.) Enter here the filename of thefirmware to be updated. After entering the filename,press the [Upload] button. Datatransfer is now commenced.It will take several dozenseco...
95 ENGLISH Press the “ENTER” button. The OPTION screen will be displayed. Select “NETWORK SETTING” with the buttons. Returning the network function setting back to thefactory setting Using the following procedure, the user can return all settings of network function such as IP address,password and E...
96 Indication of monitor lamp Three monitor lamps are provided at the top of main unit front to inform the user of the lamp replacement time andunusual internal temperature. These lamps indicate the degree of abnormality by combination of blinking and/orlighting lamps. Turn off the power and take th...
97 Cleaning and replacement of air filter ENGLISH Turn off the main power and remove the power plug from the receptacle. Turn off the power supply observing the procedure (How to turn “OFF” the power supply) on page 34 andthen remove the power plug. Dismantle the air filter. Put a hand in the bottom...
98 Replacement of lamp unit Precautions on lamp unit replacement Be careful when handling a light source lamp.The lamp unit has high internal pressure. Ifimproperly handled, failure might result.A used lamp unit may burst if it is handledviolently.For disposition of used lamps, request anindustrial ...
101 Before asking for service … try to check the following points again. ENGLISH Symptoms Checkpoint • Is the power cord securely plugged in the receptacle? • Is the MAIN POWER switch put to the “ O ” position? • Is power supply live at the receptacle? • Is the temperature monitor (TEMP) lamp on the...
102 Specifications PT-D7700E PT-DW7000E Power supply 220 V–240 V~, 50 Hz/60 Hz Power consumption 800 W (about 15 W in standby without fan running) DLP TM panel Panel sizeDisplay systemNumber of pixels 0.95 inch (aspect ratio 4:3) Three-unit DMD TM element, DLP TM type 3 x 1 470 000 pixels (1 400 x 1...
104 Appendix 640 x 400640 x 400640 x 480640 x 480640 x 480640 x 480640 x 480800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600 1 024 x 7681 024 x 7681 024 x 7681 024 x 7681 024 x 7681 024 x 768i1 024 x 7681 024 x 7681 152 x 8641 152 x 8641 152 x 8641 120 x 7501 120 x 750i1 280 x 1 0241 280 x 1 0...
105 Outside dimensions ENGLISH 540 29 200 530 <Units: mm>
Trademark Acknowledgement • Digital Light Processing, DLP, and Digital Micromirror Device, DMD are registered trademarks of the Texas Instruments. • VGA and XGA are trademarks of International Business Machines Corporation.• S-VGA is a registered trademark of the Video Electronics Standards Associat...
Panasonic Manuals
-
Panasonic RB F10
User Manual
-
Panasonic SC HTB200
User Manual
-
Panasonic CS Z25UFRAW CU Z25UBRA
Manual
-
Panasonic CS Z25UFRAW CU Z25UBRA
Installation Manual
-
Panasonic CS Z50UFRAW CU Z50UBRA
User Manual
-
Panasonic DMW BLK22
User Manual
-
Panasonic DMW BLK22
Manual
-
Panasonic NI WL55
Manual
-
Panasonic DMP BD903
Manual
-
Panasonic DMP BD903
User Manual
-
Panasonic DMP BD903
Installation Manual
-
Panasonic NN ST23QM
Manual
-
Panasonic FV-1115VK3
User Manual
-
Panasonic EH NA0J
Manual
-
Panasonic FV 30BG3
Manual
-
Panasonic RE7 59
User Manual
-
Panasonic NE C1275
Manual
-
Panasonic RG T810LHA
User Manual
-
Panasonic CF SR
User Manual
-
Panasonic RZ B110W
User Manual