Panasonic PT-AE8000U - Manuals

ENGLISH - 5 Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Contents [CLOCK PHASE] ..........................................................60[ASPECT] ......................................................................61[WSS] .........................

Read this first! 6 - ENGLISH Important Information Read this first! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only. CAUTION: The AC power co...

Read this first! ENGLISH - 7 Important Information FCC NOTICE (USA) Declaration of Conformity Model Number: PT-AE8000U Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: One Panasonic Way, Secaucus, NJ 07094 Telephone number: (877)803-8492 E-mail: projectorsuppo...

Read this first! 8 - ENGLISH Important Information WARNING: „ POWER The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued use of the projector i...

Read this first! 10 - ENGLISH Important Information WARNING: „ ACCESSORIES Do not use or handle the batteries improperly, and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire. z Do not use unspecified batteries. z Do not disassemble...

Read this first! 12 - ENGLISH Important Information CAUTION: „ Viewing 3D video Those with a medical history of oversensitivity to light, heart problems, or poor physical health should not view 3D images. This may lead to a worsening of medical conditions. If you feel tiredness or discomfort, or oth...

Read this first! ENGLISH - 13 Important Information end of Read this first Brazil Only Brasil Apenas „ Manuseio de baterias usadas BRASIL Após o uso, as pilhas e /ou baterias poderão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada. Cobrir os terminais positivo (+...

Precautions for use 14 - ENGLISH Important Information ■ Be sure to use the projector after removing the packaging material, such as the fastening tapes and protective sheet. Take proper care when disposing of the removed packaging material. Cautions when transporting z Ensure that the supplied lens...

Precautions for use ENGLISH - 15 Important Information ■ When using an infrared communications device If you use infrared communication devices (such as infrared cordless headphones or an infrared wireless mic), communication problems (such as noise) may occur. Therefore, use such devices in a locat...

Precautions for use 16 - ENGLISH Important Information Cautions on use ■ In order to view clear video images z Clear, high contrast video can be viewed when curtains are closed and lights near the screen are extinguished in order to stop light from reaching the screen. z In some rare cases, dependin...

Precautions for use ENGLISH - 17 Important Information Accessories Please confirm that the items displayed below are included. Wireless remote control unit: 1 (N2QAYB000680) Lens cover: 1 (TXFKK01THHZ) (Attached to the projector by default.) Power cord: 1 (TXFSX01RWDZ) AA/R6 battery: 2 (For remote c...

About your projector 18 - ENGLISH Preparation Remote control ■ Top ■ Front Adjust the zoom and focus. Display the [ MEMORY LOAD ] menu. Display the input waveform. Reset adjusted menu values to the default settings. Use for menu screen operation. Display the [ 3D SETTINGS ] menu. Allocate frequently...

About your projector ENGLISH - 19 Preparation Projector body Attention z Ensure that there are no build ups of dirt on the air intake and exhaust ports. z Do not place objects in front of the transmitter for the 3D Eyewear. This may lead to the 3D Eyewear not operating correctly. Use for menu screen...

About your projector 20 - ENGLISH Preparation Main power Switch the projector on/off. Lens cover attachment hole Connecting terminals Air intake port ■ Back and bottom view Security slot The security slot is compatible with the Kensington MicroSaver Security System. Front adjustable feet Screw up/do...

Setting up ENGLISH - 21 Getting Started Setting up Projection method You can use any of the following 4 projection methods. Select a projection method suitable for the position of the projector. For projection method settings, see [PROJECTION METHOD] in the [OPTION] menu. (  page 78) ■ Setting on a...

Setting up 22 - ENGLISH Getting Started Projection related Install the projector with reference to the figure below and the projection distance. You can adjust the display size and display position according to the screen size and screen position. Projection screen Screen Screen L (LW - LT) * 1 Proj...

Setting up ENGLISH - 23 Getting Started Projection screen size 16:9 in 2.35:1 size *2 Screen Diagonal (SD) Minimum distance (LW) Maximum distance (LT) Height position (H) 1.27 m (50") 1.16 m (3' 10") 2.37 m (7' 9") -0.25 to 0.75 m 1.52 m (60") 1.40 m (4' 7") 2.85 m (9' 4") -0...

Setting up 24 - ENGLISH Getting Started Lens shift and positioning If the projector is not positioned right in front of the center of the screen, you can adjust the projected image position by moving the lens shift dials within the shift range of the lens. ■ Adjusting the lens shift 1) Remove the le...

Setting up ENGLISH - 25 Getting Started ■ Projector location range The setting position can be adjusted within the following range. See “Projection related” regarding adjustment of the projection screen height (SH) and width (SW). (  page 22) ● Projector setting range when the screen position is fi...

Connections 26 - ENGLISH Getting Started Connections Before connecting to the projector z Read and follow the operating and connecting instructions of each peripheral device. z The peripheral devices must be turned off. z If not provided or sold separately with each peripheral device, obtain the con...

Connections ENGLISH - 27 Getting Started Connecting example: HDMI IN/COMPUTER IN ヤヰヮヱヶヵユンチチリワ ヴユンリモロ ヴノヷリュユヰチリワ ヵンリヨヨユンチバ ピュチヴラヶヵヵユンチヰヶヵ リワチヒ リワチビ リワチピ ヒ ビ ヤヰヮヱヰワユワヵ リワ ヷリュユヰチリワ ヴユンリモロ ヴノヷリュユヰチリワ ヵンリヨヨユンチババ ピュチヴラヶヵヵユンチヰヶヵ ヒ ビ ヤヰヮヱヰワユワヵ ユ リワ ヷリュユヰチリワ Blu-ray player To RGB output To HDMI output Comput...

Switching the projector on/off 28 - ENGLISH Basic Operation Switching the projector on/off Power cord Use the power cord included to prevent removal of the power cord and make sure it is fully inserted into the projector. Make sure the <MAIN POWER> switch is on the <OFF> side before conn...

Switching the projector on/off ENGLISH - 29 Basic Operation Switching on the projector Check external device connections before switching the projector on. Power indicator 4) 3) 5) 1) Connect the power cord to the projector.2) Connect the power plug to an outlet.3) Press the <ON> side of the &...

Switching the projector on/off 30 - ENGLISH Basic Operation Switching off the power Carefully check the status of the power indicator before operating. 4) 1) - 3) Power indicator 1) Press the power < / | > button. z The confirmation message is displayed. 2) Select [OK] with the ▲ ▼ buttons.3) ...

Projecting an image ENGLISH - 31 Basic Operation Projecting an image Check the connections of the external devices (  page 26) and the connection of the power cord (  page 28), and switch on the power (  page 29), to start projecting. Select the video for projection, and adjust appearance of the ...

Remote control operation 32 - ENGLISH Basic Operation You can operate the projector with the remote control within a range of 7 m (23'). z Operating by pointing at the projector Ensure the remote control transmitter is facing the remote control signal receiver on the front of the projector during us...

Remote control operation 34 - ENGLISH Basic Operation Submenu When the VIERA Link control is enabled, the function menus of external devices can be displayed. (  page 96) The operation mode can be changed during gamma adjustment. (  page 47) Change the detection level of parallax when the parallax...

Viewing 3D Images ENGLISH - 35 Basic Operation Viewing 3D Images About viewing 3D images You can use the projector to view 3D videos by playing Blu-ray 3D compatible discs on a 3D Blu-ray player. This projector can also convert 2D videos to 3D for viewing. To enjoy stereoscopic 3D images, Panasonic ...

Viewing 3D Images 36 - ENGLISH Basic Operation Communication range of a 3D IR Transmitter and 3D Eyewear The IR signals for controlling the 3D Eyewear transmitted from the 3D IR Transmitter reach the 3D Eyewear after being reflected by the screen. The communication range between the 3D IR Transmitte...

Menu navigation ENGLISH - 37 Settings Menu navigation Navigating through the menu ■ Operating procedure Press 1) Press the <MENU> button on the remote control or in the controls of the projector. z The main menu is displayed. PICTURE MODECONTRASTBRIGHTNESSCOLORTINTCOLOR TEMPERATURESHARPNESSDYN...

Menu navigation 38 - ENGLISH Settings Menu list The on-screen menu is used for settings and adjustments on this projector. See “Navigating through the menu” for details of on- screen menu operation. (  page 37) The submenu of the main menu is displayed, and setting/adjustment for each item can be p...

Menu navigation ENGLISH - 39 Settings ■ [LANGUAGE] Language [DEUTSCH][FRANÇAIS][ESPAÑOL][ITALIANO][PORTUGUÊS][SVENSKA][NORSK][DANSK][POLSKI][ ] [MAGYAR][РУССКИЙ][ ] [ ] [ENGLISH][ 中文 ] [ 日本語 ] ■ [3D SETTINGS] Submenu items Default setting Page [SCREEN SIZE] [203 cm (80 inches)] 64 [3D INPUT FORMAT] ...

[PICTURE] menu ENGLISH - 41 Settings [COLOR TEMPERATURE] You can adjust the color temperature if the white areas of the projected image are bluish or reddish. Less bluish Less reddish z Setting range: -6 to +6 [SHARPNESS] With regards to the input signal, adjust video sharpness using one of [SIMPLE]...

[PICTURE] menu 42 - ENGLISH Settings ■ [MONITOR POSITION] You can set the display position of the input waveform during the FULL SCAN display. Switch settings Switch settings ■ [AUTO ADJUST] The luminance level of the output signal from a connected external device is automatically adjusted by settin...

[PICTURE] menu 44 - ENGLISH Settings [SPLIT ADJUST] You can perform image adjustment for some [PICTURE] menu items while displaying a certain area of the frozen image in a split window. 1) Press the <ENTER> button. z The [SPLIT ADJUST] menu is displayed. SPLIT ADJUST AREA SELECT SPLIT ADJUST M...

[PICTURE] menu ENGLISH - 45 Settings Note z You cannot adjust menu items that are displayed in grey during split adjustment. z The [KEYSTONE] of [POSITION] becomes inactive during split adjustment. z When a 3D signal is being input (including converting 2D to 3D), the [SPLIT ADJUST] cannot be execut...

[PICTURE] menu 46 - ENGLISH Settings 3) Press the ▲▼ buttons to select [START ADJUSTMENT], and press the <ENTER> button. z The [ADVANCED ADJUST] menu appears. GAMMA ADJUSTMENTADJUSTMENT MODE GAMMA HIGHGAMMA MIDGAMMA LOW START ADJUSTMENT GAMMA NAME CHANGEINITIALIZE ADVANCED1 PICTURE POSITION LA...

[PICTURE] menu ENGLISH - 47 Settings POINT Display the currently selected point number. The number is in the order of 1 to 15 starting from the lower input level. The selected point flashes in yellow on the adjustment screen. INPUT Display the input level of the currently selected point. Can be set ...

[PICTURE] menu 48 - ENGLISH Settings c. Adjusting the output level z If you press the ▲▼ buttons, you can adjust the output level of the currently selected point. z Output level can be adjusted for each color on the [Y][R][G][B] screen. Ex: When the ▲ button is pressed on [Y]. ADVANCED ADJUSTGAMMA P...

[PICTURE] menu ENGLISH - 49 Settings Example) When the data for gamma preset value +0.40 and gamma preset value 0.00 is combined 1. Set [GAMMA PRESET] to +0.40, display the adjustment screen for any one of [Y], [R], [G], and [B], or then press the <FUNCTION> button to refresh the reference poi...

[PICTURE] menu 50 - ENGLISH Settings ● Initialize the gamma adjustment results GAMMA ADJUSTMENTADJUSTMENT MODE GAMMA HIGHGAMMA MIDGAMMA LOW START ADJUSTMENTGAMMA NAME CHANGE INITIALIZE ADVANCED1 PICTURE POSITION LANGUAGE 3D SETTINGS LENS CONTROL OPTION 1) Press the ▲▼ buttons to select [INITIALIZE] ...

[PICTURE] menu ENGLISH - 51 Settings ■ [CONTRAST] You can adjust color temperatures centering mainly on white. R (RED), G (GREEN), B (BLUE) - 1 +1 [ADVANCED MENU] menu items Default setting [CONTRAST R] 0 [CONTRAST G] 0 [CONTRAST B] 0 z Setting range: -32 to +32 ■ [BRIGHTNESS] You can adjust color t...

[PICTURE] menu 52 - ENGLISH Settings ■ [COLOR MANAGEMENT] For the selected [PICTURE MODE], you can adjust a selected color individually with [CURSOR] mode or adjust the six color components (Red, Green, Blue, Cyan, Magenta, Yellow) with [RGBCMY] mode. Adjustment results can be saved as a profile and...

[PICTURE] menu ENGLISH - 53 Settings z Adjusting the selected color (when [RGBCMY] is selected for [ADJUSTMENT MODE]) Select the color from 6 different color types ([RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW]) and adjust [COLOR], [TINT] and [BRIGHTNESS]. 1) Press the ◄► buttons to select [RG...

[PICTURE] menu 54 - ENGLISH Settings z Managing the stored logs created through the [CURSOR] mode LOG ADJUSTMENT MODE PICTURE MODE POINT1 POINT2 POINT3 POINT4 POINT5 POINT6 POINT7 POINT8 ALL DELETE : CURSOR: NORMAL COLOR TINT BRIGHTNESS +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10...

[PICTURE] menu ENGLISH - 55 Settings ● Saving a log setting as a profile Save a log setting as a profile. You can save up to six profiles. 1) Press the ▲▼ buttons to select [PROFILE SAVE] and press the <ENTER> button. z The [PROFILE SAVE] menu is displayed. 2) Press the ▲▼ buttons to select th...

[PICTURE] menu 56 - ENGLISH Settings ● Changing a profile name 1) Press the ▲▼ buttons to select [PROFILE NAME CHANGE] and press the <ENTER> button. z The [PROFILE NAME CHANGE] menu is displayed. PICTURE POSITION LANGUAGE 3D SETTINGS LENS CONTROL OPTION PROFILE NAME CHANGE USER1 USER2USER3USER...

[PICTURE] menu ENGLISH - 57 Settings ■ [CINEMA REALITY] You can switch the automatic image synchronizer on/off for 24 frames a second images, such as movies. Switch settings Switch settings [ON] Cinema reality active [OFF] Cinema reality inactive Note z [CINEMA REALITY] is effective only with interl...

[PICTURE] menu 58 - ENGLISH Settings ■ [RGB/YC B C R ] , [RGB/YP B P R ] Set this to [AUTO] under normal conditions. If images are not displayed correctly when this is set to [AUTO], set either [RGB] or [YC B C R ], [YP B P R ] in accordance with the input signal. Switch settings Switch settings The...

[PICTURE] menu ENGLISH - 59 Settings 5) Press the ▲▼◄► buttons to select [OK].6) Press the <ENTER> button. Note z Press the <ENTER> button without entering any text to keep the default name ([MEMORY1-16]). ■ [MEMORY LOAD] You can access the details saved through [MEMORY SAVE]. MEMORY LOA...

[POSITION] menu ENGLISH - 61 Settings [ASPECT] You can switch the image aspect ratio manually when needed. Aspect ratio depends on signals. Switch settings Switch settings ■ When a VIDEO/S-VIDEO signal is input [NTSC/NTSC4.43/PAL-M/PAL60 input] [AUTO] [4:3] [16:9] [ZOOM] [JUST] [S16:9] Note z [AUTO]...

[POSITION] menu 62 - ENGLISH Settings Aspect Screen [4:3] Projects at 4:3. Input signal Projection screen [16:9] Projects at 16:9. (Enlarged horizontally) Input signal Projection screen [S16:9] Projects a 16:9 aspect video onto a 4:3 aspect screen. Input signal Projection screen [JUST] Adjusts horiz...

[3D SETTINGS] menu 64 - ENGLISH Settings [3D SETTINGS] menu Either press the <3D> button on the remote control or select [3D SETTINGS] from the main menu in “Navigating through the menu” (  page 37) and select the item from a submenu. z After selecting an item, adjust the screen position usin...

[3D SETTINGS] menu 66 - ENGLISH Settings [LEFT/RIGHT SWAP] Switch to [SWAPPED] if you feel discomfort when watching a 3D video with 3D Eyewear. Switch settings Switch settings [NORMAL] [SWAPPED] [NORMAL] If the 3D video is being displayed correctly while the 3D Eyewear is being worn, do not change f...

[3D SETTINGS] menu ENGLISH - 67 Settings ■ [3D WAVEFORM MONITOR] For easy balance adjustment, use a video device that supports 3D and displays the video output (brightness) level of the 3D video for the left and right eye respectively. 1) Press the <ENTER> button. z The [3D WAVEFORM MONITOR] m...

[3D SETTINGS] menu ENGLISH - 69 Settings ● [PICTURE BALANCE MEMORY NAME CHANGE] You can edit the memory name of details saved using [PICTURE BALANCE MEMORY SAVE]. 1) Press the ▲▼ buttons to select [MEMORY NAME CHANGE] and press the <ENTER> button. z The [PICTURE BALANCE MEMORY NAME CHANGE] men...

[LENS CONTROL] menu ENGLISH - 73 Settings Select [LENS CONTROL] from the main menu of “Navigating through the menu” (  page 37), and choose an item from the submenu. z After selecting an item, adjust the screen position using the ▲▼◄ ► buttons. Remote control Projector controls Note z During the di...

[LENS CONTROL] menu 74 - ENGLISH Settings [LENS MEMORY SAVE] This enables saving zoom and focus adjustment position, horizontal video position, vertical video position, adjustment for amount of mask, and aspect settings. LENS MEMORY SAVE LENS MEMORY1 LENS MEMORY2 LENS MEMORY3 LENS MEMORY4 LENS MEMOR...

[LENS CONTROL] menu ENGLISH - 75 Settings ■ [LENS MEMORY NAME CHANGE] 1) Press the ▲▼ buttons to select the memory name to be changed. LENS MEMORY NAME CHANGE LENS MEMORY1 LENS MEMORY2LENS MEMORY3LENS MEMORY4LENS MEMORY5LENS MEMORY6 PICTURE POSITION LANGUAGE 3D SETTINGS LENS CONTROL OPTION 2) Press ...

[OPTION] menu ENGLISH - 79 Settings [TRIGGER 1/2 SETTING] You can set the function for each trigger terminal. The trigger terminals for this projector are used as both the input/output terminal for the trigger function and the output terminal for the external 3D IR Transmitter (optional accessory). ...

[OPTION] menu 80 - ENGLISH Settings • [BLANK] When [BLANK] is activated, output is 12 V. If the setting is released, output is 0 V. • [RS-232C COMMAND LINK] Receives commands (  page 103) from external device and outputs 12 V. z Input [POWER ON/OFF] [BLANK] • [POWER ON/OFF] If the trigger input sig...

[OPTION] menu ENGLISH - 81 Settings [LAMP POWER] Switch the lamp intensity according to the usage environment of the projector and its intended use. Switch settings Switch settings [NORMAL] When higher luminance is required [ECO] When lower luminance is sufficient Note z The brightness in the [ECO] ...

[OPTION] menu ENGLISH - 83 Settings [OTHER FUNCTIONS] Press the <ENTER> button. z The [OTHER FUNCTIONS] menu is displayed. OTHER FUNCTIONS FREEZE BLANK VIERA LINK INPUT SELECT HDMI1 IN HDMI2 IN HDMI3 IN COMPUTER IN COMPONENT IN S-VIDEO IN VIDEO IN PICTURE POSITION LANGUAGE 3D SETTINGS LENS CON...

[OPTION] menu 84 - ENGLISH Settings [INITIALIZE ALL] Return all settings to factory defaults. When you perform this operation, the projector is set to the standby state for initialization. 1) Press the ▲▼ buttons to select [INITIALIZE ALL], and press and hold the <ENTER> button for three secon...

TEMP and LAMP Indicators ENGLISH - 85 Maintenance TEMP and LAMP Indicators Managing the indicated problems If a problem should occur with the projector, the lamp indicator <LAMP> and/or temperature indicator <TEMP> will illuminate or flash. Check the indicator status and deal with proble...

Care and replacement ENGLISH - 87 Maintenance Before cleaning the projector / replacing components Attention z Turn off the <MAIN POWER> switch and disconnect the power plug from the wall outlet before cleaning the projector/replacing components. z Follow the “Switching off the power” procedur...

Care and replacement 88 - ENGLISH Maintenance 4) Attach the air filter unit to the projector. z Attach the air filter unit to the projector using the reverse of the procedure in 2). * Insert the air filter unit into the projector in the direction of the arrow engraved into the air filter frame ( UP ...

Care and replacement ENGLISH - 89 Maintenance Component replacement ■ Air filter and electrostatic filter The air filter should be replaced when cleaning is ineffective. A replacement air filter / electrostatic filter is available separately (service component). Contact your dealer for the optional ...

Care and replacement 90 - ENGLISH Maintenance ■ When to replace the lamp unit The lamp unit is a consumable component. Brightness decreases according to duration of usage, so periodical replacement of the lamp unit is necessary. A rough estimate for the usage period is 4 000 hours, but depending on ...

Care and replacement ENGLISH - 91 Maintenance ■ Lamp unit replacement procedure Attention z Once a lamp unit has exceeded its lifespan of 4 000 hours (when [LAMP POWER] is set to [NORMAL]) the projector can only be used for 10 minutes after turning on. (  page 90) z Perform steps 20) to 23) of the ...

Care and replacement ENGLISH - 93 Maintenance 20) Press the <MENU> button to display the menu screen and select [OPTION] with the ▲▼ buttons. 21) Press the <ENTER> button and select [LAMP RUNTIME] with the ▲▼ buttons. 22) Hold the <ENTER> button down for 3 seconds. z The confirmati...

Troubleshooting 94 - ENGLISH Maintenance Troubleshooting Re-confirm these points. See the relevant page for details. Problem Cause Page Power does not turn on. z The power cord may not be connected. z The <MAIN POWER> switch is turned <OFF>. z The wall outlet may not be supplying electri...

Ceiling mount bracket safeguards ENGLISH - 95 Maintenance Ceiling mount bracket safeguards z When mounting the projector on the ceiling, use the Panasonic specified ceiling mount bracket (model no.: ET-PKA110H (for high ceilings) and ET-PKA110S (for low ceilings)). z Installation work of the ceiling...

Using VIERA Link 96 - ENGLISH Appendix Using VIERA Link VIERA Link (HDAVI Control) connects projector and the equipment with VIERA Link function, and enables easy control of the home theater equipment using the projector remote control. z This projector supports “HDAVI Control 5” function. However, ...

Using VIERA Link ENGLISH - 97 Appendix ■ VIERA Link Control of compatible equipment “Using [VIERA LINK]” (  page 98) z Table below displays maximum number of compatible equipment that can be controlled by VIERA Link Control. This includes connections to equipment already connected to the projector....

Using VIERA Link 98 - ENGLISH Appendix ■ Using [VIERA LINK] You can control some functions of the connected device with the controls or remote control of this projector. z If operation is not possible, check the settings of the device. z For details on operating an external device, see the manual of...

Using VIERA Link ENGLISH - 99 Appendix ● [HOME THEATER VOLUME] You can adjust the volume of the theater speaker with the projector remote control. z If the volume cannot be adjusted, check the settings of the device. 1) Select [HOME THEATER VOLUME] with the ▲▼ buttons. VIERA LINK CONTROL HOME THEATE...

Technical information 100 - ENGLISH Appendix List of compatible signals The following table specifies the types of signals compatible with the projectors. Format: V: VIDEO, S: S VIDEO, R: RGB, Y: YC B C R /YP B P R , H: HDMI Mode SIGNAL MODE Display resolution (dots) *1 Scanning frequency Dot clock ...

Technical information ENGLISH - 101 Appendix Supported 3D video signal list When [3D INPUT FORMAT] is set to [AUTO], the 3D signals supported by this projector are the HDMI signals in the table below. Mode Format of 3D video signals FRAME PACKING SIDE BY SIDE TOP AND BOTTOM 750 (720)/60p ○ * ○ ○ * 7...

Technical information 102 - ENGLISH Appendix Serial terminal The serial port on the connector panel of the projector conforms to the RS-232C interface specification, so the projector can be controlled by a personal computer connected to this port. ■ Connection Serial terminal (female) D-sub 9 pin (m...

Technical information ENGLISH - 103 Appendix ■ Cable specifications (When connected to a personal computer) ■ Control commands Commands available when controlling this projector from a computer are as follows.<Operation commands> Command Control contents Remarks PON POWER ON In standby mode, a...

Specifications 106 - ENGLISH Appendix Specifications The following table describes the specifications of the projector. Power supply AC 100-240 V 50 Hz/60 Hz Power consumption Less than 310 W During standby (when fan is stopped): 0.08 W Amps 3.8 A - 1.5 A LCD panel Panel size (diagonal) 18.7 mm (0.7...

Specifications 108 - ENGLISH Appendix Dimensions Unit: mm 470 (18 1/2") 140 (5 1/2") 60 (2 3/8") 14 (9/16" ) 345 (13 19/32") 19 (3/4" ) 151 (5 15/16" ) 116 (4 9/16" ) 137 (5 13/32")

Index ENGLISH - 109 Appendix Index Numbers 2D TO 3D .................................................. 69 3D Eyewear .............................................. 36 3D EYEWEAR BRIGHTNESS ................ 70 3D INPUT FORMAT ................................. 64 3D IR TRANSMITTER .......................

Panasonic System Communications Company of North America One Panasonic Way 2F-13, Secaucus, NJ 07094 TEL: (877) 803 - 8492 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 TEL: (905) 624 - 5010 ヱ㄂ㄏ㄂ㄔㄐㄏㄊ㄄チヤㄐㄓㄑㄐㄓ㄂ㄕㄊㄐㄏ Web Site : http://panasonic.net/avc/projector/ © Panasonic Corp...