Panasonic NA-F90T1 - Manuals

5 3 2 1 4 5 Procedures before washing • Check the installation See pages 19~21 for details. 1 Level the washing machine by adjusting the adjustable leg and using the leveller as reference. 2 Connect the water supply hose. 3 Turn on the faucet. 4 Plug power cord into socket outlet. 5 Insert the drain...

6 1 Put the laundry into the machine. 2 Allow the machine to churn the laundry for 5 seconds. 3 Detergent volume indications. Press the [POWER ON] button and then press the [START/HOLD] button after putting in the laundry. The pulsator operates for about 5 seconds without any water in the tub to mea...

7 Figure A Liquid bleach level Cap mark level How to use liquid detergent Put in the liquid detergent according to the water level into the bleach / liquid detergent inlet. Bleach / Liquid Detergent Inlet [NOTE] • Liquid detergent, like powdered detergent is not easily dissolved and can leave scum a...

8 “Economy’’ Laundering Using wash water twice Wash lightly soiled laundry in the first load. Wash heavily soiled laundry in the second load. 1. Put the laundry in the tub, and press [POWER ON]. 2. Press [WASH] button and press [START/HOLD] button. 3. Put in the detergent. 4. Wash finishes. Take the...

9 Fuzzy logic control is used to recommend the proper water level and amount of detergent for the amount of laundry being done. Caution: If you need to change the [PROGRAM] and [SOAK] settings after the cycle has already started, turn the power off and on it back. Operations Panel WASH, SPIN • Press...

10 NORMAL Course Suitable for normal washing of casual laundry. 1 Press the [POWER ON] button and put in the laundry. 2 Press the [START/HOLD] button. • The light will indicate “NORMAL’’ Course automatically. • The machine will measure the load size without water (laundry sensing). « • The water lev...

11 HYPER SPEEDY Course Suitable for washing lightly soiled laundry or quick wash. 1 Press the [POWER ON] button and put in the laundry. 2 Press the [PROGRAM] button two times for selecting “HYPER SPEEDY” Course. • The light will indicate “HYPER SPEEDY” Course. • The process time selection can be sel...

12 Washable Blanket Blanket which are made of 100% synthetic fiber or 100% cotton with care symbol. (Weight per blanket is 4.2k g or less) Net can be bought in the market from authorized dealer. (AXW22I-8500) Prepare Before Washing Blanket 1. How to fold Blanket: 1 Fold the blanket in half in the le...

13 CLEAN WHITE Course Sauce and condiment stain are washed out without any effort. • In this course, automatic dispensing of fabric softener cannot be used. • Do not use this course for clothes not suitable for bleach, such as colored or patterned garments. • Oxidized bleach does not achieve the cor...

14 RESERVE Program 1 Press the [POWER ON] button and put in the laundry. 2 Choose the [PROGRAM] that suit to your laundry type. 3 Press the [RESERVE] button and select between 2 to 24 hours. 4 Press the [START/HOLD] button. • The machine will measure the load size without water (laundry sensing). « ...

15 Cancelling end buzzer after washing 1. Press [START/HOLD] button and [POWER ON] button at the same time, release [POWER ON] button and hold [START/HOLD] button at least for 3 seconds. Two times beep sound indicates the end buzzer of washing has been cancelled. • Repeat step 1 to activate the end ...

16 Choosing Your Own Laundry Setting 7 WASH To reuse the wash water.• After washing, the wash water is left in the tub and the machine stop operation.• Select the time for washing as desired.• The time selection is depend on the program chosen. 7 RINSE To rinse the separately washed laundry.• After ...

17 Maintenance Lint fi lter / Water supply hose fi lter / Main unit and tub • Be absolutely sure to follow the procedures as described, otherwise water will spray out. 1. Turn off the water faucet.2. Press the [POWER ON] button.3. Press the [START/HOLD] button. The WATER LEVEL will light up a few se...

18 Please observe the following Instructions shut off After fi nishing don’t forget:- • Please shut off the faucet. • Please don’t let water store for a long time. w This is to prevent water soaking. Do not put any type of charger stand on the washing machine. • When you place the charger stand for ...

19 How to install Placement Establish a ground (In case of two-wire power cords) • When there is a grounding receptacle on power supply outlet. • When carbon ground rod (sold separately) is used.• Do not connect to gas pipe, water pipe, or ground wire of telephone or lighting rod. • Reestablish a gr...

20 A B Connect the water supply hose That the appliance is to be connected to the water faucet using new water tap adaptor and water supply hose and that old one should not be reused.1. Loosen the 4 screws on the water tap adaptor just enough to slip the adaptor over the mouth of the faucet.2. Slip ...

21 Screws Figure 3 Bottom Cover Base Figure 2 3 3 4 1 2 Changing the position of the drain hose Depending on the drain location, the position of the drain hose can be changed to the left side of the washing machine. Changing the position from the right to the left side 1 Remove the screw af fi xing ...

22 Troubleshooting Symptoms Causes Machine begins fi lling water in the middle of the wash. • When the laundry amount is large at the HIGH water level, the machine sometimes fi lls automatically. When level goes down, the machine fi lls automatically. The water level is too high for the amount of la...