Panasonic NA-F62B1 - Manuals

5 3 2 1 4 5 Procedures before washing • Check the installation See pages 16~18 for details. 1 Level the washing machine by adjusting the adjustable leg and using the leveller as reference. 2 Connect the water supply hose. 3 Turn on the faucet. 4 Plug power cord into socket outlet. 5 Insert the drain...

6 Determining load and detergent levels with the Quick Indication 1 Put the laundry into the machine. 2 Allow the machine to churn the laundry for 5 seconds. 3 Detergent volume indications. Press the [POWER ON] button and then press the [START/HOLD] button after putting in the laundry. The pulsator ...

7 How to use liquid detergent Put in the liquid detergent according to the water level into the bleach / liquid detergent inlet. Bleach / Liquid Detergent Inlet [NOTE] • Liquid detergent, like powdered detergent is not easily dissolved and can leave scum along the inside of the washing tub, so be su...

8 “Economy’’ Laundering Using wash water twice Wash lightly soiled laundry in the first load. Wash heavily soiled laundry in the second load. 1. Put the laundry in the tub, and press [POWER ON]. 2. Press [PROCESS] button for [WASH] and press [START/HOLD] button. 3. Put in the detergent. 4. Wash fini...

9 Fuzzy logic control is used to recommend the proper water level and amount of detergent for the amount of laundry being done. RESERVE ë You can choose the finishing time to 9 hours. (See page 11) OFF/ON ë The power automatically turns off when total operations is finished. ë The power automaticall...

10 NORMAL Course Suitable for normal washing of casual laundry. 1 Press the [POWER ON] button and put in the laundry. 2 Press the [START/HOLD] button. • The light will indicate “NORMAL’’ Course automatically. • The machine will measure the load size without water (laundry sensing). « • The water lev...

11 DELICATE Course Suitable for washing soft laundry. Remark: Amount of laundry that can be washed at one time : 3.0 k g 1 Press the [POWER ON] button and put in the laundry. 2 Press the [PROGRAM] button twice for “DELICATE” Course. • The light will indicate “DELICATE’’ Course automatically. 3 Press...

12 Cancelling end buzzer after washing 1. Press [START/HOLD] button and [POWER ON] button at the same time, release [POWER ON] button and hold [START/HOLD] button at least for 3 seconds. Two times beep sound indicates the end buzzer of washing has been cancelled. • Repeat step 1 to activate the end ...

13 Process settings You can select PROGRAM to wash your own laundry according to your preferences. (By pressing [PROCESS] button) 7 WASH To reuse the wash water.• After washing, the wash water is left in the tub and the machine stop operation. 7 SPIN To spin the separately washed laundry.• If the wa...

14 Maintenance Lint fi lter / Water supply hose fi lter / Main unit and tub Lint fi lter 2. Remove the lint from the fi lter. • When the fi lter is torn, etc. Obtain another one from the place of purchase.• Turn the wash tub if the fi lter cannot be removed easily. (See page 7 for details.) 3. Put t...

15 Please observe the following Instructions shut off After fi nishing don’t forget:- • Please shut off the faucet. • Please don’t let water store for a long time. w This is to prevent water soaking. Do not put any type of charger stand on the washing machine. • When you place the charger stand for ...

16 How to install Placement Socket outlet Establish a ground (In case of two-wire power cords) • When there is a grounding receptacle on power supply outlet. • When carbon ground rod (sold separately) is used.• Do not connect to gas pipe, water pipe, or ground wire of telephone or lighting rod. • Re...

17 A B Connect the water supply hose That the appliance is to be connected to the water faucet using new water tap adaptor and water supply hose and that old one should not be reused.1. Loosen the 4 screws on the water tap adaptor just enough to slip the adaptor over the mouth of the faucet. 2. Slip...

18 Drain Hose Installation Instruction (The drain hose is installed inside the bottom of the base.) 1. Lay down the washing machine with the back body facing to the upside. Drain Hose Rear Tape 7 To change the drain hose to opposite. (Ex. Changing hose position from right to left.) 1. Lay down the w...

19 Troubleshooting The following symptoms are not trouble. Symptoms Causes Machine begins fi lling water in the middle of the wash. • When the laundry amount is large at the HIGH water level, the machine sometimes fi lls automatically. When level goes down, the machine fi lls automatically. The wate...

Error Indication Error Indication Table – when the following indications occur the buzzer will sound. 2%3%26% HOURS R Check if abnormalities listed below are seen in the external water hose.• Is the hose connected?• Is it clogged with lint?• Is it crushed?• Is the tip soaked in water?• Is a small pi...