Panasonic KXTG4773B - Manuals

For your safety To prevent severe injury and loss of life/property, read thissection carefully before using the product to ensureproper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords....

Setting up Connections R Use only the supplied Panasonic AC adaptorPNLV226. n Base unit Correct *DSL/ADSL filter (not supplied) is required if you “Click” “Click” “Click” have DSL/ADSL service. Incorrect Press plug firmly. Hook To power outlet DSL/ADSL filter* To single-line telephone jack (RJ11C) n...

Note when setting up Note for connections R The AC adaptor must remain connected at alltimes. (It is normal for the adaptor to feel warmduring use.) R The AC adaptor should be connected to avertically oriented or floor-mounted AC outlet.Do not connect the AC adaptor to aceiling-mounted AC outlet, as...

Controls Base unit A B D E F E G A C VOL. JK HI L MNOP B Corded handsetReceiverSpeakerDisplayMicrophoneDial keypad ( * : TONE) Desk stand/Wall mounting adaptor R The adaptor is a removable attachment fordesk stand or wall mounting use(page 40). M HOLD N M REDIAL N M PAUSE N M FLASH N M CALL WAIT N M...

M N (TALK) Headset jackDial keypad ( * : TONE) ReceiverDisplay M CALL WAIT NM FLASH N M OFF N MicrophoneCharge contacts n Control type Soft keys The handset features 3 soft keys. By pressinga soft key, you can select the feature showndirectly above it on the display. Navigator key – MDN , MCN , MFN ...

Item Meaning In use Answering system is beingused by the base unit oranother handset. Line in use Someone is using the line. Initial settings n Direct command code: Programmable settings can be accessed bypressing M MENU N , # and then the corresponding code on the dial keypad(page 20). Example: Pre...

Making calls Using the base unit 1 Dial the phone number. R To correct a digit, press M CLEAR N . 2 Lift the corded handset. 3 When you finish talking, place the cordedhandset on the cradle. Note: R You can also dial the phone number after liftingthe corded handset. Using the speakerphone 1 During a...

Pause (for PBX/long distance serviceusers) A pause is sometimes required when making callsusing a PBX or long distance service. Whenstoring a calling card access number and/or PIN inthe phonebook, a pause is also needed(page 19). Example: If you need to dial the line access number “9” when making ou...

Handset 1 Press M MENU N during an outside call. 2 MbN : “ Hold ” a M SELECT N 3 To release hold, press M N . R The base unit user can take the call bylifting the corded handset. R Another handset user can take the call bypressing M N . Note for base unit and handset: R If a call is kept on hold for...

Note: R When this feature is activated, is displayed while talking. R Depending on the condition and quality of yourtelephone line, this feature may emphasizeexisting line noise. If it becomes difficult to hear,turn this feature off. R This feature is not available while using thespeakerphone. Call ...

Shared phonebook The shared phonebook allows you to make callswithout having to dial manually. The base unit andany handset registered to the base unit can usethe shared phonebook. You can add 100 namesand phone numbers to the shared phonebook, andassign each phonebook entry to the desired group. Im...

Programmable settings You can customize the unit by programming the following features.To access the features, there are 2 methods. Base unit / Handset n Scrolling through the display menus 1 M MENU N 2 Proceed with the operation for your unit. Base unit: Press MCN , MDN , M N , or M N to select the...

Special programming Alarm An alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for each handset. Important: R Set the date and time beforehand (page 12). Handset 1 M MENU N#720 2 MbN : Select the desired alarm option. a M SELECT N Off Turns alarm off. Go to step 7. Once An al...

Call block (Caller ID subscribers only) This feature allows the unit to reject calls when:– the unit receives a call from a phone number stored in the call block list as unwanted (“Storingunwanted callers”, page 26). – the unit receives a call without phone number (“Blocking incoming calls without p...

Registering a handset to the base unit The supplied handset and base unit arepre-registered. If for some reason the handset isnot registered to the base unit, re-register thehandset. 1 Handset: M MENU N#130 2 Base unit: Press and hold M LOCATOR N for about 5 seconds until the registration tone sound...

Using Caller ID service Important: R This unit is Caller ID compatible. To use CallerID features, you must subscribe to a Caller IDservice. Contact your service provider/telephonecompany for details. Caller ID features Base unit / Handset When an outside call is being received, the caller’sname and ...

Handset 1 M N a M MENU N 2 MbN : “ Group ” a M SELECT N 3 MbN : Select the desired group. a M SELECT N 4 MbN : Select the current setting of the ringer ID. a M SELECT N 5 MbN : Select the desired ringer tone. a M SAVE N 6 M OFF N Caller list Important: R Only 1 person can access the caller list at a...

Note: R Phone numbers from the 4 most recently editedarea codes are automatically edited. Erasing selected caller information Base unit / Handset 1 Proceed with the operation for your unit. Base unit: M CID N Handset: MFN CID 2 MbN : Select the desired entry. 3 M ERASE N a MbN : “ Yes ” a M SELECT N...

Answering system The answering system can answer and recordcalls for you when you are unavailable to answerthe phone.You can also set the unit to play a greetingmessage but not to record caller messages byselecting “ Greeting only ” as the recording time setting (page 35). Important: R Only 1 person...

5 M OFF N Using a pre-recorded greetingmessage The unit provides 2 pre-recorded greetingmessages:– If you erase or do not record your own greeting message, the unit plays a pre-recorded greetingasking callers to leave a message. – If the message recording time (page 35) is set to “ Greeting only ” ,...

Note: R To switch to the receiver, press M N . Operating the answering system M MENU N a MbN : “ Answering device ” a M SELECT N Key Operation MjN or MkN Adjust the receiver/speakervolume (during playback) 1 or MFN Repeat message (duringplayback) *1 2 or MEN Skip message (during playback) 3 Enter th...

4 When finished, hang up. Voice guidance n When the English voice guidance is selected During remote operation, the unit’s voiceguidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected...

If your service provider/telephone companycannot do this:– Set this unit’s “ Ring count ” setting so that this unit’s answering system answers callsbefore the voice mail service of your serviceprovider/telephone company does. It isnecessary to check the number of ringsrequired to activate the voice ...

Voice mail service Voice mail is an automatic answering serviceoffered by your service provider/telephonecompany. After you subscribe to this service, yourservice provider/telephone company’s voice mailsystem answers calls for you when you areunavailable to answer the phone or when your lineis busy....

Intercom Intercom calls can be made:– between the base unit and a handset– between handsets Note: R When paging unit(s), the paged unit(s) beepsfor 1 minute. R If you receive an outside call while talking on theintercom, you hear 2 tones.– To answer the call with the base unit, place the corded hand...

Wall mounting The base unit can be mounted on a wall bychanging the wall mounting adaptor’s position. Note: R Make sure that the wall and the fixing methodare strong enough to support the weight of theunit. Base unit 1 To remove the wall mounting adaptor, pushdown the release levers ( A ). Remove th...

Error messages Display message Cause/solution Base no power or No link. Re-connectbase AC adaptor. R The handset has lost communication with the base unit. Movecloser to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit. Reconnectthe adaptor and try again. R The hand...

FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided ...

Guía Rápida Española Instalación Unidad base Auricular Cargador CARGUE APROXIMADAMENTE DURANTE 7 HORAS L Use solo el adaptador de corriente Panasonic PNLV226 incluido. L Para sujetar el cable del adaptador de corriente al gancho de la unidad base. Consulte la “ Connections ” (Conexiones) del manual ...

Fecha y hora (Auricular) 1 { MENU } ( 1 ) 1 2 Introduzca el día, mes y año actuales. s { OK } 3 Introduzca la hora y minuto actuales (formato de reloj de 24 horas). 4 { GUARDA } s { OFF } Operaciones básicas Cómo hacer y contestar llamadas (Unidad base/Auricular) Para hacer llamadas Unidad base: Mar...

Customer services Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.pa...

Warranty (For United States and Puerto Rico) PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “...

Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by produ...

Index # 4-way conference: 16 A Additional handset: 26 Alarm: 25 Answering calls: 14 Answering system Call screening: 31 Erasing messages: 32 , 33 , 34 Greeting message: 31 Greeting only: 35 Listening to messages: 32 , 33 Number of rings: 34 Recording time: 35 Remote access code: 33 Remote operation:...

55 Notes TG477x(en-en)_1130_ver021.pdf 55 2011/11/30 15:57:57

1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions . Visit our Web site: http://www.panasonic.com/help L FAQ and troub...