Panasonic KXMB2030 - Manuals

11. Help Reports and Displays 11.1 Report messages (KX-MB2030 only) .......... 73 11.2 Display messages ....................................... 74 Troubleshooting 11.3 When a function does not work ................... 77 12. Paper Jams Jams 12.1 Recording paper jam .....................................

1.1 Supplied accessories A Toner cartridge(starter) *1 B Drum cartridge(KX-FAD462) *3 C CD-ROM(PNJKMB2030Z) *3 D Importantinformation guide(English–PNQW2318Z) *3 (Spanish–PNQW2319Z) *3 E Quick installationguide(PNQW1881X) *3 F Output tray(PNZEMB2030EB) *3 G Power cord(PNJA1022Z) *3 H Telephone line ...

1.3 Button descriptions ABCDEF GH IJ K M N Q R P O S T U V W L * The pictured model is KX-MB2030. Station keys (KX-MB2030 only) R To use the one-touch dial feature (page 42,43). M Manual Broad N (KX-MB2030 only) R To send a document to multiple parties by usingthe dial keypad (page 44). M Broadcast ...

1.5 Toner cartridge and drumcartridge The supplied toner cartridge is a starter toner cartridge. Caution: R Read the following instructions before you begininstallation. After you have read them, open thedrum cartridge protective bag. The drumcartridge contains a photosensitive drum.Exposing it to l...

8 Close the top cover by holding the indentations onboth sides of the unit, until locked. Caution: R To prevent injuries, be careful not to put yourhands under the top cover. When to replace the toner cartridge and the drumcartridge When the display shows the following, replace the tonercartridge.– ...

1.7 Recording paper The paper input tray unit can hold:– Up to 250 sheets of 60 g/m 2 to 75 g/m 2 (16 lb to 20 lb) paper. – Up to 230 sheets of 80 g/m 2 (21 lb) paper. – Up to 200 sheets of 90 g/m 2 (24 lb) paper. R A4, letter, B5 and 16K-size paper can be used. B5and 16K-size paper can only be used...

4 Adjust the recording paper guides. Pinch the frontside of the recording paper guide ( D ), then slide it to match the paper size mark. Pinch the right side of therecording paper guide ( E ), then slide it to adjust the width to the size of the recording paper. R Make sure that the recording paper ...

2.2 Turning the power switch ON Turn the power switch to the ON position ( A ). A 2.3 Dialing mode (KX-MB2030only) If you cannot dial (page 41), change this settingaccording to your telephone line service. M Set N M Menu N 1 M Menu N 2 Press MBNM 1 NM 2 NM 0 N to display “ DIALING MODE ” . 3 Press M...

2.4 Selecting the operation mode(Scan/Copy) (Fax: KX-MB2030only) You can select the desired mode by pressing one of thefollowing buttons. KX-MB2000 KX-MB2010 KX-MB2030 – M Scan N : Select this mode when using the unit as a scanner (page 30). – M Copy N : Select this mode when using the unit as a cop...

2.6 Help function (KX-MB2030only) The unit contains helpful information, which can beprinted for reference.– “ BASIC SETTINGS ” – “ FEATURE LIST ” – “ PHONEBOOK ” – “ FAX SND/RCV ” – “ COPIER ” – “ Q and A ” – “ ERRORS ” – “ REPORTS ” – “ CALLER ID ” MFNMEN M Set N M Menu N 1 Press M Menu N repeated...

2.8 Date and time We recommend you to set the date and time. The otherparty will receive your unit’s date and time as the headerinformation. MFNMEN M Set N M Menu N M Fax N * The pictured model is KX-MB2030. 1 M Menu N A MBNM 1 NM 0 NM 1 N A M Set N 2 Enter the current month/date/year by selecting 2...

2.10 Your fax number(KX-MB2030 only) You can program your fax number so that it appears onthe top of each page sent. MFNMEN M Set N M Flash N M Stop N M Menu N 1 M Menu N A MBNM 1 NM 0 NM 3 N A M Set N 2 Enter your fax number, up to 20 digits. R To enter a “+”, press MGN . R To enter a space, press ...

– Labels that do not completely cover the backing sheet as follows: 3.2 Easy Print Utility By printing using the Panasonic Easy Print Utility insteadof the printer driver, you can use useful printing featuresfor your convenience.– Preventing unnecessary prints by checking the preview on PC screen – ...

4.1 Scanning from the unit (PushScan) You can easily scan the document by using the operationpanel on the unit. You can select one of the followingscanning modes depending on how you intend to use thescanned image.– Viewing using Multi-Function Viewer (Viewer)– Saving as a file to your computer (Fil...

5.1 Making a copy 5.1.1 Using the scanner glass M Fax Auto Answer N M Resolution N M Contrast N M Stop N M Start N M Copy Size N M Copy N M Set NMCNMDNMEN * The pictured model is KX-MB2030. 1 If the M Copy N light is OFF, turn it ON by pressing M Copy N . 2 Set the original (page 19). 3 If necessary...

5.1.2 Using the automatic document feeder(KX-MB2010/KX-MB2030 only) M Copy N M Stop N M Start N * The pictured model is KX-MB2010. 1 If the M Copy N light is OFF, turn it ON by pressing M Copy N . 2 Set the original (page 20). 3 If necessary, change the copy size (originaldocument size and recording...

Example: 150 % enlarged copyUsing the scanner glass ( A ): Original document Enlarged copy A Using the automatic document feeder (KX-MB2010/KX-MB2030 only): Original document Enlarged copy Example: 70 % reduced copyUsing the scanner glass ( A ): Original document Reduced copy A Using the automatic d...

1 Set the original (page 19). 2 While “ PC PRINTING ” or “ PRINTING ” (KX-MB2030 only) is displayed, press M Copy N . 3 Make necessary settings such as number of copies,resolution, zoom features and page layout features. A M Start N R “ COPY RESERVED ” will be displayed. The unit will start copying ...

6.1 Sending a fax manually 6.1.1 Using the scanner glass By using the scanner glass, you can send a page frombooklets or small size paper. M Resolution N M Contrast N M Redial N M Fax N M Start N M Set N M Quick Scan N 1 If the M Fax N light is OFF, turn it ON by pressing M Fax N . 2 Set the origina...

fax transmissions and receptions, make sure feature#402 is activated (page 59). For an explanation of themessages, see page 73. 6.1.2 Using the automatic document feeder M Fax N M Quick Scan N M Monitor N M Start N 1 If the M Fax N light is OFF, turn it ON by pressing M Fax N . 2 Set the original (p...

4 M Menu N Note: R A hyphen or a space entered in a telephone numbercounts as 2 digits. 6.2.3 Editing a stored item 1 M Phonebook N 2 Press MCN or MDN repeatedly to display the desired item. A M Menu N A MGN 3 Edit the name if necessary. A M Set N 4 Edit the telephone number if necessary. A M Set N ...

4 M Start N 6.4 Broadcast transmission You can send the same document to multiple parties (upto 20). To use this feature, store the fax numbers intobroadcast memory as follows. Broadcast: Store items using one-touch dial or phonebook (page 42). Manual broadcast: Store items using one-touch dial or p...

6.5 Sending an electronicdocument as a fax message fromyour computer You can access the fax function from a Windowsapplication using Multi-Function Station.For example, to send a document created fromWordPad, proceed as follows. 1 Open the document you want to send. 2 Select [Print...] from the [Fil...

2. Press MEN repeatedly to display “ JUNK LIST DISP. ” . A M Set N 3. Press MCN or MDN repeatedly to display the desired item. A MFN R To cancel erasing, press M Stop N , then press M Menu N . 4. M Set N A M Menu N 6.10 Receiving a fax on yourcomputer You can receive a fax document on your computer....

7.1 Caller ID service This unit is compatible with the Caller ID serviceoffered by your local telephone company. To use thisunit’s Caller ID features, you must subscribe to aCaller ID service.Make sure the following ring count is set to 2 or morerings beforehand. – FAX ring count (feature #210 on pa...

2 M Set N R To cancel erasing, press M Stop N , then M Menu N . 3 M Set N A M Stop N 7.3.2 Erasing specific caller information R Make sure that the M Fax N light is ON. 1 M Caller ID N 2 Press MCN or MDN repeatedly to display the desired item. A MFN A M Set N A M Stop N 7.4 Storing caller informatio...

8.1 Distinctive Ring service When a call is made to one of your phone numbers, thetelephone company sends a ring pattern to yourtelephone line to indicate which number the call isintended for. By setting up this unit for Distinctive Ring,you can make the unit automatically start fax receptionwhen a ...

Feature/Code Selection Setting the waiting time forthe power save mode MBNM 4 NM 0 NM 3 N To set the length of time before the unit enters power save mode. M 1 N “ 5min ” (default): 5 minutes M 2 N “ 15min ” : 15 minutes M 3 N “ 30min ” : 30 minutes M 4 N “ 1h ” : 1 hour Note: R When in power save m...

9.5 PC print features Feature/Code Selection Changing the data timeoutsetting MBNM 7 NM 7 NM 4 N The unit will automatically print the remaining data in memory when thecomputer does not send data to the unit during the set time. 1. M Menu N A MBNM 7 NM 7 NM 4 N A M Set N 2. Enter the desired data ti...

10.1 Character entry The dial keypad is used to enter characters andnumbers.– Press MFN or MEN to move the cursor. – Press the dial keys to enter characters and numbers.– Press M Stop N to erase the character or number highlighted by the cursor. Press and hold M Stop N to erase all characters or num...

R When another person is adjusting stored data in theunit, it may be overwritten. Make sure the unit is notcurrently being used for the same function. 10.2.2 Using Device Monitor You can confirm the setting information and currentstatus of the unit from your computer. 1 Start Multi-Function Station....

11.2 Display messages To indicate the unit’s status, one or more of the following messages will appear on the display. Display Cause & Solution “ CALL SERVICE ” R There is something wrong with the unit. Contact our service personnel. “ CHANGE DRUM ” R There is something wrong with the drum cartr...

11.3 When a function does not work 11.3.1 General Problem Cause & Solution The unit does not work. R Check the connections (page 17, 25). The output tray becomes fullquickly or the recording paperdoes not stack properly onthe output tray. R High humidity may cause the recording paper to curl. Tr...

Problem Cause & Solution I forgot the password forfeature programming viaremote operation. R You may have changed the feature programming password. If you do notremember it, assign a new password using feature #155 (page 56). Whenrequired to enter the current password, enter “ 0101 ” instead. 11...

12.1 Recording paper jam Caution: R Do not pull out the jammed paper forcibly beforeopening the top cover. R To prevent injuries, be careful not to put yourhands under the top cover. 12.1.1 When the recording paper has jammedinside of the unit The display will show the following:– “ PAPER JAMMED ” L...

14.1 Reference lists and reports You can print out the following lists and reports for yourreference.– “ SETUP LIST ” – “ TEL NO. LIST ” *1 – “ JOURNAL REPORT ” *1 – “ BROADCAST LIST ” *1 – “ PRINTER TEST ” – “ CALLER ID LIST ” *1 – “ ADDRESS LIST ” – “ FTP SERVER LIST ” – “ SMB FOLDER LIST ” *1 KX-...

14.3 Information of copyrights and licenses R This product uses a part of NetBSD kernel.The use of a part of NetBSD kernel is based on the typical BSD style license below. Copyright (c) The Regents of the University of California. All rights reserved. Redistribution and use in source and binary form...