Panasonic KX-TCD430NZ - Manuals

5 Preparation Location of controls Handset A Receiver B Display C {k} (Phonebook) D {C} (Talk) E Navigator L{e}{v} : To search for the desired item in the setting menu, caller information or phonebook. L{>} : To select the desired item or move the cursor to the right. L{<} : To go back to the ...

6 Preparation Connections Note: L If the handset is not charged, you cannot make or answer calls. L Never install telephone wiring during a lightning storm. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) L Use only the AC adaptor, noted o...

7 Preparation 0 5 4 flashes. Note: L If the handset is turned off, it will be turned on automatically when it is placed on the base unit. Battery life After your Panasonic batteries are fully charged, you can expect the following performance: Ni-MH batteries (typical 700 mAh) Ni-Cd batteries (typica...

8 Preparation Wall mounting Note: L Make sure the screws are securely fastened to the wall. L Use the following wall template to position the screws before drilling. Setting the time and date Important: L Confirm that the AC adaptor is connected. L Ensure that w is not flashing. 1 Press {j} . 2 Pres...

9 Telephone Telephone Making calls 1 Lift the handset and dial the phone number. L To correct a digit, press { C } , then enter the correct number. 2 Press {C} . 3 When finished talking, press {ih} or place the handset on the base unit. To adjust the receiver volume You can select the desired receiv...

10 Telephone displayed. To turn off key lock, press {j} for about 2 seconds. Note: L Emergency calls cannot be made until key lock is turned off. L Key lock is turned off when the handset is turned off. R button (to use the recall feature) { R } is used to access optional telephone services. Contact...

11 Telephone Phonebook Storing phone numbers and names Up to 20 phone numbers can be stored in the phonebook for quick access. 1 Press {j} 2 times. 2 Enter a phone number (24 digits max.). L Each number stored in the phonebook will be given an index number (01–20). This number will be shown to the l...

12 Telephone Making calls using the phonebook Before using this feature, store the desired phone numbers and names into the phonebook (page 11). 1 Press {k} . 2 Press {e} or {v} repeatedly to display the desired entry. 3 Press {C} . Hot key (quick dial) Assigning an entry in the phonebook to a hot k...

13 Telephone Caller ID service Important: L This unit is Caller ID compatible. To display the caller’s phone number, you must subscribe to Caller ID service. After subscribing to Caller ID, this unit will display caller information. For all local and national incoming calls, your display will show t...

14 Telephone information will be automatically erased.You can easily view caller information and use it to make calls. 1 Press {v} . 2 Press {v} repeatedly to search from the most recent caller information. Example: *1 Shown when this call has already been viewed or answered. 3 Press {C} to call bac...

15 Useful Telephone Settings Useful Telephone Settings Guide to handset settings For your reference, a chart of all items which can be customised for the handset is printed below. Details of each item can be found on the corresponding pages.To enter the 2nd menu, first press {>} . Press {v} repea...

16 Useful Telephone Settings Handset settings Time alarm An alarm will sound for 3 minutes at the set time once or daily.“ ONCE ”: The alarm will ring only once. “ REPEAT DAILY ”: The alarm will ring at the set time everyday.“ OFF ”: Turns this feature off. Set the time and date beforehand (page 8)....

17 Useful Telephone Settings “ ALARM ”: For alarm 1 Press {j} . 2 Press {v} repeatedly to display “ SETTING HS ”, then press {>} . 3 Press {v} repeatedly to display “ RINGER OPT ”, then press {>} . 4 Press {v} repeatedly to display the desired item, then press {>} . 5 Press {v} repeatedly t...

18 Useful Telephone Settings “ PHONE NO ”: The phone number will be displayed. 1 Press {j} . 2 Press {v} repeatedly to display “ SETTING HS ”, then press {>} . 3 Press {v} repeatedly to display “ DISPLAY OPT ”, then press {>} . 4 Press {v} repeatedly to display “ TALK MODE ”, then press {>}...

19 Useful Telephone Settings Turning direct call on/off 1 Press {j} . 2 Press {v} repeatedly to display “ SETTING HS ”, then press {>} . 3 Press {v} repeatedly to display “ CALL OPT ”, then press {>} . 4 Press {v} repeatedly to display “ SET DIRECT ”, then press {>} . 5 Press {v} repeatedly...

20 Useful Telephone Settings Guide to base unit settings For your reference, a chart of all items which can be customised for the base unit is printed below. Details of each item can be found on the corresponding pages. *1 If you cancel a handset, the base unit will “forget” the handset registration...

21 Useful Telephone Settings 7 Select the desired setting by pressing { 1 } for 100 ms or { 2 } for 600 ms. 8 Press {>} , then press {ih} . Setting pause length 1 Press {j} . 2 Press {v} repeatedly to display “ SETTING BS ”, then press {>} . 3 Press { 3 } . 4 Enter “ 0000 ” (default base unit ...

22 Useful Telephone Settings 6 Press { C } . 7 Press {>} , then press {ih} . Storing emergency numbers This feature determines which phone numbers may be dialled while the call bar feature is turned on. A total of 4 emergency numbers (memory locations 1–4) can be stored. 1 Press {j} . 2 Press {v}...

23 Multi-unit Operation Multi-unit Operation Operating additional units Additional handsets Up to 6 handsets can be registered to a single base unit. Additional handsets will give you the freedom to, for example, have an intercom call with another handset while a third handset is on an outside call....

25 Multi-unit Operation Setting all or selected handsets to ring You can select one of 3 methods to determine how the handsets ring for incoming calls. − “ 1 ”: All handsets will ring. − “ 2 ”: Selected handset(s) will ring. − “ 3 ”: Selected handset(s) will ring, then all handsets will ring. Settin...

27 Useful Information Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the AC adaptor and turn off the handset, then reconnect the AC adaptor and turn on the handset. 0w4 is flashing. L The handset is not registered to the...

28 Useful Information redialled. Redial the number manually. The handset beeps intermittently and/or 0 7 4 flashes. L Fully charge the batteries (page 6). I fully charged the batteries, but 0 7 4 still flashes. L Clean the charge contacts and charge again (page 6). L It is time to replace the batter...

29 Useful Information Technical information Standard: DECT (Digital Enhanced Cordless Telecommunications), GAP (Generic Access Profile) Number of channels: 120 Duplex Channels Frequency range: 1.88 GHz to 1.9 GHz Duplex procedure: TDMA (Time Division Multiple Access) Channel spacing: 1728 kHz Bit ra...

30 Index Index Index A Additional base units: 23 Additional handsets: 23 All handsets to ring: 25 Selected handsets to ring: 25 Answering calls: 10 Auto talk: 10 B Base unit Cancelling: 24 Guide to settings: 20 PIN: 20 Resetting: 22 Selecting: 24 Battery Charge: 6 Installation: 6 Life: 7 Replacement...

For your future reference Attach or keep original receipt to assist with any repair under warranty. Sales Department: Manufacturer:Panasonic Communications Zhuhai Co., Ltd. 3 Ping Xi 8 Lu, Nanping Keji Gongye Yuan, Zhuhai, Guangdong, China 519060 © 2004 Panasonic Communications Co., Ltd. All Rights ...