Panasonic KX-T206E - Manuals

5 Precaution • Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps, motors and television. These noise sources can interfere with the perform-ance of the Electronic Modular Switching System. • This unit should be kept free of dust, moisture, h...

6 Specifications ....................................................................................................................... 7 Before Installation ............................................................................................................... 8 Unpacking ....................

7 Specifications General Descriptions 1. Capacity .................................... CO line 2 Extension 6 2. Control Method ......................... Stored Program CPU: 8 bits CPU Control ROM: 64 KB, Control RAM: 8 KB 3. Switching Method ..................... Space Division CMOS Crosspoint Switc...

8 Before Installation Please read the following notes concerning installation and connection before installing thesystem. Safety Installation Instructions When installing telephone wiring, basic safety precautions should always be followed to reduce the riskof fire, electric shock and injury to pers...

9 Unpacking • Main Unit ............................. one• AC Cord ............................... one • Screw and Washer ................ three• 4-pin Plug ............................. eight POWER ELECTRONIC MODULAR SWITCHING SYSTEM AC Inlet Power Indicator Inside View of the Main Unit Ground Term...

10 1. Loosen the screw. 2. Slide the cover in the direction of the arrow while pressing the markedposition. Opening Front Cover Frame Ground Connection To Earth POWER ELECTRONIC MODULAR SWITCHING SYSTEM IMPORTANT!!!Connect the frame of the main unit to earth. Templet Wall Mounting 1. Place the templ...

11 System Connection Diagram Pa nas oni c Panasonic A U TO S C A N AUTO SCAN 10 CH 10CH Pan aso nic Panasonic Panasonic Panasonic ELECTRONIC MODULAR SWITCHING SYSTEM 2 CO Lines Doorphone KX-T30865 Doorphone 6 Extensions (one pair) (two pair) (two pair) (two pair) (one pair) (one pair) KX-T7130 KX-T7...

12 CO Line Connection Wire Specification The wire specifications are as follows: Wire Solid wire Diameter of conductor ø 0.4 – ø 0.65mm Diameter with coating ø 0.66 – ø 1.05mm Connection Use a 4-pin plug (included) to connect CO lines.A single plug is able to connect two CO lines. Use twisted pair c...

13 Extension Connection Wire Specification The wire specifications are as follows: Wire Solid wire Diameter of conductor ø 0.4 – ø 0.65 mm Diameter with coating ø 0.66 – ø 1.05 mm Connection Use a 4-pin plug (included) to connect extension lines.There are 6 plugs to connect extensions to EXTN. 1 thr...

14 Any single line telephone can be connected in parallel with a proprietary telephone. ELECTRONIC MODULAR SWITCHING SYSTEM POWER Paralleled Telephone Connection Notes• The following features are not available for SLT connected in parallel: Call SplittingExternal Feature AccessConference 4-conductor...

15 Installation of Optional Card and Unit Doorphone (KX-T30865) Connection 2-conductor wiring cord KX-T30865 Notes• The doorphone adaptor is not required for KX-T206.• To avoid howling, you must assign all extensions as “DISABLE” in the “#06/#76 Doorphone Assignment (Day/Night)” program when you do ...

17 Installation of Lightning Protectors Overview A lightning protector is a device to be installed on a CO line to prevent a dangerous surge fromentering the building and damaging equipment.A dangerous surge can occur if a telephone line comes in contact with a power line. Trouble dueto lightning su...

18 Installation of an Earth Rod NoticeIf you install an extension outside of the main building, the following precautions are recom-mended:(1) Install the extension wire underground.(2) Use a conduit to protect the wire. Note• The lightning protector for an extension is different from that for CO. (...

19 Power Failure Transfer In the event of a power failure, CO2 is connected to extension 22 automatically. Note• The system programmed data is protected by the factory provided lithium battery. Starting the System Plug the AC power cord into the system and an AC outlet. • The power indicator of the ...

20 General Programming Instructions Default Setting This system has a default factory setting. If any of the program-ming needs to be changed, you can change the setting by systemprogramming. Required Telephone Set You can use any of the following telephones for system program-ming:• Proprietary Tel...

21 System Programming 0 1 [A] [B] 0 2 2 (for day) / (for night) [A] [B] 7 System Speed Dialling Number Set Description Used to program System Speed Dial numbers. These numbers are available to all exten-sion users. There are 40 numbers from 00 through 39. Condition • A maximum of 32 digit numbers ca...

24 System Programming 1 0 (Record your message) 9 0 [A] [Denied code No.] TRS Denied Code (CLASS 2, 3) Description Allows you to specify the numbers which are toll-restricted for TRS Class 2 and Class 3. Condition • The character “ ” can be any number. Input Format Explanation • [A]= Code No.: 0 thr...

25 System Programming 1 2 [A] 1 3 [A] [B] OGM Play Description Confirms the outgoing message recorded in the OGM Recording program. Condition • If you perform programming with a PT, the message “PLAYBACK” will be displayed on its panel. Input Format Fax Connection Description Allows the system to de...

26 System Programming 4 1 [A] [B] 1 [A] 5 CO2 Delayed Ringing Assignment Description Assigns delayed ringing to extensions when a call from CO line 2 is received. Condition • The number of delayed rings is assigned by the “#15 Delayed Ringing Count Selection” program. • This feature is not available...

27 System Programming 7 [A] [BB] [CC] [D] 1 9 9 7 [A] 0 [A] [B] 1 6 Door Opener Assignment Description Assigns each extension to have access to door opener or not. Input Format Explanation • [A]= 1 through 6 (corresponding to extension no. 21 through 26)• [B]= 0: DISABLE/ 1: ENABLE Default All exten...

28 System Programming Other Programs • Host PBX Access Code Assignment Assigns a Host PBX access code to make anoutside call, if the system is installed behind thehost PBX. A pause is automatically insertedafter the access code and the toll restrictionfeature applies to the number after the code.Inp...

29 System Programming • Hookswitch Flash Time Range Assignment Sets the hookswitch flash time range.Input Format: #65 [A]• [A]=1: 80–1000ms / 2: 80–150ms 3: 50–150ms (default) • Door Opener Access Time Assigns the length of the Door Opener time.The door is unlocked for the assigned time.Input Format...

30 System Programming Least Cost Routing (LCR) Programs Least Cost Routing (LCR) is a system programmable feature that automatically selects the leastexpensive route available at the time a long distance call is made.It is not necessary to dial the access code of the least expensive carrier.You must...

31 System Programming • LCR Itemized Bill Code Assigns whether to register the itemized billcode (extension number 21 through 26) to eachCO line or not. This code is used for dividing abill to a CO line.Input Format: #86 [A] [B]• [A]=1: CO1/ 2: CO2• [B]=0: DISABLE (default)/ 1: ENABLE • BTL Access C...

Tone / Ring Tone 33 <Ring Tone> 1 sec Intercom Calls /Intercom Hold Recall CO Calls /CO Hold Recall Doorphone Calls NOTE • The dial tone 2 is heard during the system programming mode and when the following features are set: Do Not DisturbCall Pickup DenyCall ForwardingData Line Security

Programming Tables 34 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [#00] System Speed Dialling Number Set No. Phone No. (32 digits max.) Name

Templet 39 39 106 mm Install a screw here Install a screw here 71 mm 77 mm Install a screw here • Copy the templet and place it on the wall. Up

Panasonic Business Systems U.K. Panasonic House, Willoughby Road, Bracknell,Berkshire RG12 4FP Printed in Japan PSQX1141ZB KW0397KM1097