Panasonic EY6950 - Manuals - manualsarea.com

Page 2 - SAVE THESE INSTRUCTIONS; Work Area; Personal Safety

- 2 - . GENERAL SAFETY RULES FOR ALL BAT- TERY OPERATED TOOLS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 1) Keep your work area clean and well lit...

Page 3 - Service; RULES

- 3 - 14) Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired. 15) Disconnect battery pack from tool or place the switch in the locked or off position before making any adjust- ments, changing accessories, or stor- ...

Page 4 - BATTERY CHARGER

- 4 - 8) During charging, the charger may become slightly warm. This is nor- mal. Do not charge the battery for a long period. Symbol meaning V Volts Direct Current n 0 no load speed …/min revolutions or reciprocation per minutes Forward Rotation Reverse Rotation Rotation with Hammering Rotation onl...

Page 6 - .FUNCTIONAL DESCRIPTION; Attaching or removing bit

- 6 - .FUNCTIONAL DESCRIPTION Clutch handle Keyless drill chuck Variable speed control trigger 18V Battery pack (EY9251) Speed selector switch Vent holes Forward/ Reverse lever Battery pack release button Battery charger (EY0110) Support handle . ASSEMBLY Attaching or removing bit Note: When attachi...

Page 7 - Switch Operation; Forward/Reverse lever Operation; Forward Rotation Switch Operation; Clutch Torque Setting

- 7 - Attaching or removing battery pack 1. To connect the battery pack: Insert the battery pack. It snaps into place to indicate proper connection. 2. To remove the battery pack: Press the two buttons on the sides of the battery pack. Slide the battery pack out of the tool body. 3. Support handle P...

Page 8 - Speed Selection; For Appropriate use of Battery; Battery Pack Life

- 8 - Bit-locking function 1. With the trigger switch not engaged and a screwdriver bit locked in place, the tool can be used as a manual screwdriver (up to 22.6 Nm, 230 k f-cm, 199 in-lbs). There will be a little play in the chuck, but this is not a malfunction. 2. This feature is handy for tighten...

Page 9 - Charging

- 9 - extremely short after recharging, replace the battery pack with a new one. Note: Use under extremely hot or cold conditions will reduce operating capacity per charge. Charging Note: When you charge the battery pack for the first time, or after prolonged storage, charge it for about 24 hours to...

Page 10 - BATTERY RECYCLING; RECOMMENDED SPEED SELECTION

- 10 - . LAMP INDICATIONS Red Flashing Red Lit Flashing quickly Orange Lit Orange Flashing Charger is plugged into a wall outlet. Ready to charge.Now charging Charging is completed.Battery pack is warm. Charging will begin when temperature of battery pack drops.Charging is not possible. Clogged with...

Page 12 - SATISFACTION GUARANTEE:; PANASONIC CONSUMER ELECTRONICS COMPANY

30-DAY QUALITY SATISFACTION GUARANTEE: If you are dissatisfied with any Panasonic Cordless Power Tool for any reason, simply return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts and instructions, within 30 days of the date of purch...