Panasonic ER1511 - Manuals

6 Cut Using the hair clipper Turn the dial clockwise or counterclockwise to adjust the moving blade back and forth to get the desired height. Adjustable in 5 stages from 0.8 mm to .0 mm in 0.3 mm steps without attachments.The actual cut length may be longer than the set length. Using the comb attach...

7 Care Blade maintenance Removing and mounting the blade Removing the blade 1. Hold the clipper with the switch facing upward and push the blade with your thumb while catching the blade in your other hand. Be sure to turn off the power before you remove the blade. • Mounting the blade 1. Set the dia...

8 Cleaning the blade 1. Brush off any hairs from the clipper and from around the blade. 2. Remove the blade and brush off the hairs from the blade edge. 3. Brush the hairs out from between the stationary blade and the moving blade while pressing down on the cleaning lever to raise the moving blade. ...

9 Removing the built‑in rechargeable batteries 1. Remove the blades 1 and four screws 2 . . Remove the spring 3 , the under cover 4 , and the blade holder 5 . 3. Remove the dial 6 and open the housing 7 , and then take out two batteries 8 . Disconnect the clipper from a household outlet.Discharge th...