Panasonic DMR-EZ49VEB - Manuals

VQT2J51 5 P8 – 14 GUIDE Plus+ system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Using the GUIDE Plus+ list . . . . . . . . . . . . . . . . . . . . . . . . . . . 36View advertisement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Selecting the programme from the ...

6 VQT2J51 Remote Control Information/Unit Care About batteries ≥ Insert so the poles ( i and j ) match those in the remote control. ≥ Use alkaline or manganese batteries. ≥ Do not mix old and new batteries. ≥ Do not use different types at the same time. ≥ Do not heat or expose to flame. ≥ Do not lea...

VQT2J51 7 Media Handling Holding a disc Handle discs by the edges to avoid inadvertently scratching or getting oil from your fingers on the disc. Do not touch the signal surface of discs (the shiny side). Cleaning discs Discs are not indestructible and occasionally dirt or condensation may appear. C...

8 VQT2J51 Location of Parts/Controls Quick Start Guide Remote Control 1 Turn the unit on or off .................................................. ( > 13) 2 Select drive [DVD or VHS] ............................... ( > 20, 21, 22) 3 Select channels and title numbers etc./ Enter numbers ..........

VQT2J51 9 STEP 1 The Unit’s Display 1 Timer recording indicator .......................... ( > 23) On: When a timer recording programme is registered and a recordable disc or video cassette is inserted. Flashes: When the unit cannot record a timer recording programme (e.g., there is no disc or vi...

10 VQT2J51 Basic Connection ≥ Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions. BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3. 1 Aerial cable to the “ RF IN ” on the unit. 2 RF coaxial cable (included) from the “ RF OUT ” on ...

VQT2J51 11 STEP 2 1 Aerial cable to the “ RF IN ” on the digital satellite receiver. 2 RF coaxial cable from the “ RF OUT ” on the digital satellite receiver to the “ RF IN ” on the unit. 3 RF coaxial cable (included) from the “ RF OUT ” on the unit to the “ RF IN ” on the TV. 4 21-pin Scart cable f...

12 VQT2J51 Basic Connection ≥ You can enjoy high-quality picture by adding the HDMI cable connection to the 21-pin Scart cable connection between this unit and your TV. When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted, enabling you to enjoy hig...

VQT2J51 13 STEP 3 Setting the Channels and Clock Preparation: ≥ Turn on the mains for the television (and connected equipment) and select the appropriate AV input to suit the connections to this unit. ≥ These are the first settings you make upon buying the unit. You don’t need to make these settings...

14 VQT2J51 Setting the Channels and Clock Tips To correct the PIN number 1 Press [ 2 , 1 ] to select the digit. 2 Press the numbered buttons to enter the digit. To correct the character 1 Press [ 2 , 1 ] to select the character. 2 Press [ 3 , 4 ] to correct the character. To display the Owner ID inf...

VQT2J51 15 STEP 3 Disc Handling ≤ : Can do, –: Cannot do ≥ The explanations concerning video cassettes are indicated by [VHS] . § 1 [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] Finalisation is needed for playback on other equipment ( > 65). [RAM] can be played back on Panasonic DVD recorders and DVD-RAM co...

16 VQT2J51 Disc Handling § Play may be impossible on some DVD-RW (DVD Video Recording format), DVD-R, DVD-R DL, CD-R or CD-RW discs due to the condition of the recording. ≥ You can play still pictures (JPEG) and MP3 format data recorded on DVD-R, DVD-R DL or CD-R/RW. You can also play CD-DA, Video C...

VQT2J51 17 USB Memory Handling ≥ Despite meeting the conditions mentioned above, there may be USB memories that cannot be used for this unit. ≥ This unit’s USB port does not support bus-powered USB device. USB memories you can use on this unit Compatible USB memories USB memories which are defined a...

18 VQT2J51 Music files and Still Pictures (JPEG) ≥ If there is a large amount of still picture data etc. within an MP3 file, play may not be possible. § 1 Total number of recognizable file including MP3, JPEG and other type of files is 4000. § 2 It may take a few moments for still pictures to displa...

VQT2J51 19 Watching Television Basic Operations Refer to “GUIDE Plus+ system” ( > 36) for detail information. This DVD recorder has a tuner which allows it to directly receive and record digital terrestrial channels. Preparation: ≥ Turn on the television and select the appropriate video input to ...

20 VQT2J51 Playback Preparation: ≥ Turn on the television and select the appropriate video input to suit the connections to this unit. Playing play-only discs Refer to “Advanced Disc Playback” ( > 38 to 39) for detailed information on playback of discs. [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+...

VQT2J51 21 Playing a Video Cassette Refer to “Advanced Video Cassette Playback” ( > 40 to 41) for detailed information on playback of video cassette. [VHS] 1 to turn the unit on. 2 to select the VHS drive. – The VHS indicator lights up on the unit. 3 Insert a cassette ( > 7). – Play starts aut...

22 VQT2J51 Recording Television Programmes Refer to “Notes for Recording” ( > 27) and “Advanced Recording” ( > 28– 30) for detail information on recording. [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] Preparation: ≥ Turn on the television and select the appropriate video input to suit ...

VQT2J51 23 Timer Recording What is FREEVIEW TM ? FREEVIEW is the function that enables timer recordings to be controlled by the signal sent from the broadcaster. “Guide Link” is available.“ Guide Link ” – If you set a timer recording from the TV Guide, the recording’s start and stop times can be con...

24 VQT2J51 Copying Titles (One Touch Copy) Refer to “Copying Titles or Playlists” ( > 57 to 59) for detail information on copying. Copying Titles (VHS J DVD) Programmes are automatically copied onto the disc from the location of playback at the time when the copying of the tape starts. [VHS] >...

VQT2J51 25 Copying Titles or Playlists (DVD J VHS) All titles on the disc are automatically copied onto the tape. [RAM] [-R] [-R]DL] [-RW‹V›] [-RW‹VR›] [+R] [+R]DL] [+RW] > [VHS] Preparation: ≥ Turn on the television and select the appropriate video input to suit the connections to this unit. ≥ [...

26 VQT2J51 Deleting Titles Preparation: ≥ Turn on the television and select the appropriate video input to suit the connections to this unit. ≥ [RAM] If the disc is protected, release protection ( > 64). ≥ Insert the disc containing the programme to be deleted. Important: Once deleted, contents c...

VQT2J51 27 Notes for Recording Advanced Features ≥ It is not possible to record to DVD or VHS drive while recording to the other drive. Selecting audio for recording Broadcast in multi-channel sound: You can select audio language when received audio in multi- channel broadcast (“Multi Audio” appears...

28 VQT2J51 Advanced Recording Depending on the content being recorded, the recording times may become shorter than indicated. (The times provided on this table are an estimate.) § 1 It is not possible to record or play continuously from one side of a double sided disc to the other. § 2 When “Recordi...

VQT2J51 29 Formatting is the process of making media such as DVD- RAM recordable on recording equipment. [RAM] [-RW‹V›] [+R] [+R]DL] [+RW] The following screen may appear when inserting a new disc or a disc that has been recorded on another equipment.Only format the disc if you intend to use it for ...

30 VQT2J51 Advanced Recording [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] The unit sets the best possible picture quality that fits the programme within the remaining disc space. The recording mode becomes FR mode. Refer to “FR (Flexible recording mode)” ( > 28). Notes ≥ You cannot record more...

VQT2J51 31 Recording from a Digital Satellite Receiver [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] Tips To skip unwanted parts Press [ ; ] to pause recording. (Press again to restart recording.) ≥ [VHS] When recording is paused for 5 minutes or more, the unit returns to stop. To stop record...

32 VQT2J51 Recording from an External Device [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] ≥ Turn off the unit and other video equipment before connecting. ≥ Refer to “Adding a VCR: Connecting to a Television and a Video Cassette Recorder” when connecting to the AV2 input terminals on the rea...

VQT2J51 33 Advanced Timer Recording [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] § 1 If “AUTO” is selected, and if the programme includes the information of subtitles or Audio Description, they are automatically recorded with the programme. § 2 When there are multiple languages, select the s...

34 VQT2J51 Advanced Timer Recording If you set a timer recording that will overlap with other timer recordings using the GUIDE Plus+ system, the “Overlapped Timer Recording” screen appears to help you eliminate the overlapping. Follow the on-screen instructions. The timer recording list can be viewe...

VQT2J51 35 [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] To make a timer recording with your television, connect to a television with a Q Link function ( > 46) that you can use for setting timer recordings using a fully wired 21-pin Scart cable ( > 10,11). Tips To stop recording Press [ ∫ ]. ...

36 VQT2J51 GUIDE Plus+ system Notes ≥ The receipt of the GUIDE Plus+ system data is only possible via the aerial input of this unit. The receipt of the GUIDE Plus+ data via externally connected digital satellite receivers is not possible. ≥ The GUIDE Plus+ system setup will not work if the clock is ...

VQT2J51 37 This function lets you display a GUIDE Plus+ list sorted by programme type (e.g. Movie, Sport) or category (e.g. Free Channels, Radio). Notes ≥ The broadcasters allocate individual programmes to topic areas. This function does not work properly unless the information which distinguishes t...

38 VQT2J51 Advanced Disc Playback You can easily select and play recorded programmes by using DIRECT NAVIGATOR. [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] Tips To select the title with the numbered buttons To view other pages Press [ 3 , 4 , 2 , 1 ] to select “Previous” or “Next”, then...

VQT2J51 39 [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] [VCD] Notes ≥ If continued for approx. 5 minutes, slow-motion play pauses automatically (except [DVD-V] [VCD] ). ≥ [VCD] allow slow-motion in the forward direction only. [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V]...

40 VQT2J51 Advanced Video Cassette Playback Notes Slow-motion Play is automatically cancelled after 10 minutes. You can quickly review a portion of the video just played or cue to later portions of the tape. Notes Cue/review is automatically cancelled after 10 minutes. Tips For quicker operation ≥ H...

VQT2J51 41 The unit usually makes tracking adjustments automatically, but you may need to do it manually if noise appears on a tape recorded on other equipment. Tips To remove the noise from a paused picture: Start slow-motion ( > 40), then adjust the tracking. Notes ≥ This function may not work ...

42 VQT2J51 Playing Music files and Still Pictures (JPEG) [-R] [-R]DL] [CD] [USB] Showing the menu with FUNCTION MENU Display e.g. selecting a file to play 1 Press [RETURN ] several times to exit the menu. 2 Press [FUNCTION MENU]. 3 [-R] [-R]DL] [CD] 1 Press [ 3 , 4 ] to select “Playback”, then press...

VQT2J51 43 [RAM] [-R] [-R]DL] [CD] [USB] For more information on still picture files that can be played on this unit ( > 18) Notes ≥ Still pictures cannot be played during recording or copying. Tips DIRECT NAVIGATOR screen icons To stop viewing a picture Press [ ∫ ]. To return to the Album View s...

44 VQT2J51 Playing Music files and Still Pictures (JPEG) Picture Settings Background Music Settings Notes ≥ Music albums on the same media cannot be used as the Background Music. (Even if a music album on the same media is selected, the music is not played.) ≥ DTS-CD cannot be played back as Slidesh...

VQT2J51 45 Convenient Functions By using the FUNCTION MENU you may access the main functions quickly and easily. ≥ If “FUNCTION MENU Display” is set to “On” in the Setup menu, FUNCTION MENU automatically appears when you turn the power on. ( > 69) Tips To exit the FUNCTION MENU Press [FUNCTION ME...

46 VQT2J51 Linked Operations with the TV (VIERA Link “HDAVI Control TM ”/Q Link) You can enjoy linked operations with the TV and receiver by using “VIERA Link” or Q Link. Notes The following systems from other manufacturers have similar function to Q Link from Panasonic. For details, refer to your t...

VQT2J51 47 If you connect this unit to the TV that supports “HDAVI Control 2” or later with an HDMI cable, you can enjoy using more convenient functions. You can operate this unit using buttons on the TV remote control. The buttons that you can use for this unit vary depending on the TV. For details...

48 VQT2J51 Information Messages You can display the information about programmes (programme name, broadcast time, etc.). Tips To switch information of the current programme and the next programme Press [ 2 , 1 ]. ≥ NOW: current programme ≥ NEXT: next programme To select the information of another ch...

VQT2J51 49 You can select one of your favourite channels by changing the category [such as Free Channels, Radio and Registered Favourites ( > 66)]. Notes ≥ If “No Signal” is displayed, check that the current digital broadcast channel is correctly broadcasting. The following messages and displays ...

50 VQT2J51 Titles—Editing Advanced Editing [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] (You can not edit finalised discs.) [+RW] [-RW‹VR›] You can edit titles on the DIRECT NAVIGATOR screen: deleting unwanted parts of titles such as commercials, changing Thumbnail, dividing and deleting titles, etc. 1 ...

52 VQT2J51 Chapters—Creating and Editing [RAM] When creating chapters in your favourite scenes, you can easily reach the head of scene using [ : , 9 ] (SKIP) or play on Chapter View. Allows viewing and editing chapters individually. 1 Press [DRIVE SELECT] to select the DVD drive. 2 Press [DIRECT NAV...

VQT2J51 53 Creating, Editing and Playing Playlists [RAM] [-RW‹VR›] (play only) You can create playlists by grouping your favourite scenes (chapters) from the recorded titles and edit the created playlists. With the unit stopped 1 Press [FUNCTION MENU]. 2 Press [ 3 , 4 ] to select “Others”, then pres...

VQT2J51 55 Still Pictures—Editing [RAM] You can edit pictures and albums. 1 Press [DIRECT NAVIGATOR]. When “PICTURE” is not selected, press the “Green” button to select “PICTURE”. Editing an album: Press [ 3 , 4 , 2 , 1 ] to select the album. – Multiple editing ( > below, Tips) – When you want to...

56 VQT2J51 Still Pictures—Editing [RAM] Set protection to prevent pictures from being accidentally deleted.Perform steps 1 – 3 of “Accessing the Album (still picture)/ Picture View” ( > 55). ≥ When editing an album, press [ 3 , 4 ] to select “Edit Album”, then press [OK] after step 3 . 4 Press [ ...

VQT2J51 57 Copying Titles or Playlists [VHS] > [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] 1 Press [FUNCTION MENU]. 2 Press [ 3 , 4 ] to select “Copy”, then press [OK]. 3 Press [ 3 , 4 ] to select “Advanced Copy”, then press [OK]. 4 Set the copy direction. – If you are not going to change the ...

58 VQT2J51 Copying Titles or Playlists [RAM] [-RW‹VR›] [+RW] > [VHS] 1 Press [FUNCTION MENU]. 2 Press [ 3 , 4 ] to select “Copy”, then press [OK]. 3 Press [ 3 , 4 ] to select “Advanced Copy”, then press [OK]. – If you are not going to change the registered list, press [ 4 ] several times ( > s...

60 VQT2J51 Copying Still Pictures 4 Register still pictures for copy. – If you are going to copy a registered list without making any changes to it ( > step 5 ). You can register still pictures or still picture folders. – Still pictures and folders cannot be registered on the same list. To regist...

VQT2J51 61 Tips To stop copying Press and hold [RETURN ] for 3 seconds. To return to the previous screen Press [RETURN ]. To view other pages Press [ 3 , 4 , 2 , 1 ] to select “Previous” or “Next”, then press [OK]. – You can also press [ : , 9 ] to view other pages. To select another folder After pe...

62 VQT2J51 Setting On-Screen Display Setting Menus When playing discs (except for JPEG discs), you can display and set the options including disc audio, subtitle, image quality, sound effect, Repeat Play, etc. In addition, when receiving the multi-audio broadcast, you can change the audio settings. ...

64 VQT2J51 DVD Management You can manage discs through formatting, finalising and other operations. With the unit stopped 1 Press [DRIVE SELECT] to select the DVD drive. 2 Press [FUNCTION MENU]. 3 Press [ 3 , 4 ] to select “Others”, then press [OK]. 4 Press [ 3 , 4 ] to select “DVD Management”, then...

VQT2J51 65 [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] You can play these discs on compatible DVD players by finalising it on the unit, effectively making it into DVD-Video that complies with DVD-Video standards. The menu you create with the unit can also be used on most DVD players.Perform preparation steps...

66 VQT2J51 Setup Menu You can change the unit’s settings using Setup menu. With the unit stopped 1 Press [FUNCTION MENU]. 2 Press [ 3 , 4 ] to select “Others” and press [OK]. 3 Press [ 3 , 4 ] to select “Setup”, then press [OK]. 4 Press [ 3 , 4 ] to select a menu, then press [ 1 ] to go to the item ...

VQT2J51 67 DVB Auto Setup by Signal Quality DVB Auto Setup by Region You can restart auto channel setting for digital terrestrial channels if the setup ( > 13) fails for some reason. If you want to set the channel list best suited to your region, select “DVB Auto Setup by Region”. Follow the on-s...

68 VQT2J51 Playback/Recording and Picture Settings 3 , 4 select “Disc” > 1 > 3 , 4 select item > 3 , 4 select “Picture” > 1 > 3 , 4 select item > > Others > Setup ( > 66, Accessing the Setup Menu) All factory default settings are indicated with “Underlined” text. Disc Sett...

VQT2J51 69 Sound and Display Settings 3 , 4 select “Sound” > 1 > 3 , 4 select item > § Incorrect settings can cause noise to be output which can be harmful to your ears and speakers, and audio will not be recorded properly on media such as mini discs. Refer to the operating instructions for...

70 VQT2J51 Connection Settings 3 , 4 select “Connection” > 1 > 3 , 4 select item > > Others > Setup ( > 66, Accessing the Setup Menu) All factory default settings are indicated with “Underlined” text. Connection TV Aspect This setting needs to be changed when connected to a 4:3 sta...

VQT2J51 71 § 1 Depending on the connected equipment, some items may be shaded in grey on the display and cannot be selected, or you may not be able to change the settings. § 2 Choose the setting to suit your TV and preference. AV1 Output Set according to the terminal of the connected TV.[Video] Sele...

72 VQT2J51 System Settings 3 , 4 select “Others” > 1 > 3 , 4 select item > > Others > Setup ( > 66, Accessing the Setup Menu) All factory default settings are indicated with “Underlined” text. Others Remote Control ( > 82) [DVD 1] [DVD 2] [DVD 3] Clock ( > 14) Owner ID ( >...

74 VQT2J51 Other Settings Other Settings The Child Lock deactivates all buttons on the unit and remote control. Use it to prevent other people from operating the unit. Press and hold [OK] and [RETURN ] at the same time until “X HOLD” appears on the unit’s display. If you press a button while the Chi...

VQT2J51 75 Additional Connections Reference ≥ Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions. Connect AC mains lead only after all other connections are complete. BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3. Using a fully...

76 VQT2J51 Additional Connections ≥ You can connect this unit to a TV using the audio/video (AV) cable, instead of the HDMI cable or 21-pin Scart cable ( > 10, 11, 75). ≥ Using a Scart or HDMI cable gives a higher quality picture than this connection. ≥ Connect to terminals of the same colour. Yo...

VQT2J51 77 When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted, enabling you to enjoy high quality, digital video and audio with just one cable. When connecting to an HDMI-compatible HDTV (High Definition Television), the output can be switched to...

78 VQT2J51 Frequently Asked Questions How can I enjoy High Quality Video up-converted to 1080p? ¾ Connect the unit to 1080p compatible HDTV using an HDMI cable. Set “HDMI Video Format” in the Setup menu to “1080p”. ( > 12, 70) What equipment is necessary to play multi-channel surround sound? ¾ Yo...

VQT2J51 79 Can I record from a commercially purchased video cassette or DVD? ¾ Most commercially sold video cassettes and DVDs are copy protected; therefore, recording is usually not possible. Can DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL, and +RW recorded on the unit be played on other ...

80 VQT2J51 Messages § The message are alternately displayed. On the Unit’s Display H ∑∑ , F ∑∑ ( “ ∑ ” stands for a service number.) ≥ An error has occurred. The number following “H” or “F” depends on the status of the unit. Check the items below and in the Troubleshooting Guide. If the service numb...

VQT2J51 81 On the Unit’s Display (Continued) F74 ≥ The HDMI connection could not be authenticated due to a transfer malfunction. If you have another HDMI cable, try to use it. If it remains displayed, consult the dealer where the unit was purchased. F75 ≥ The HDMI connection could not be authenticat...

82 VQT2J51 Troubleshooting Guide Use this function to synchronize the codes for the remote control and the main unit when there are other Panasonic products close to your unit. With the unit stopped 1 Press [FUNCTION MENU]. 2 Press [ 3 , 4 ] to select “Others”, then press [OK]. 3 Press [ 3 , 4 ] to ...

VQT2J51 83 Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, consult your dealer for instructions. No power. The unit does not turn on pressing [ Í ]. ¾ Insert the AC mains le...

VQT2J51 89 Part or all of a recorded title has been lost. ¾ If the power shuts down or the AC mains lead is disconnected from the household mains socket while recording or editing, the title may be lost or the disc may become unusable. We cannot offer any guarantee regarding lost titles or discs. Yo...

90 VQT2J51 Troubleshooting Guide Cannot format. ¾ The disc is dirty. Wipe with a damp cloth and then wipe dry. ( > 7) ¾ Disc may be defective or of poor quality. ¾ You tried formatting a disc that is not compatible with the unit. ( > 15, 16, 64) Cannot create chapters. Cannot mark the start po...

VQT2J51 91 Specifications § 1 Finalising is necessary for compatible playback. § 2 Conforming to IEC62107 This unit is not compatible with “Chaoji Video CD” available on the market including CVD, DVCD and SVCD that do not conform to IEC62107. Power supply: AC 220 V to 240 V, 50 Hz Power consumption:...

92 VQT2J51 Glossary Bitstream This is a signal compressed and converted into digital form. It is converted back to a multi-channel audio signal, e.g., 5.1-channel, by a decoder. CPRM (Content Protection for Recordable Media) CPRM is technology used to protect broadcasts that are allowed to be record...

94 VQT2J51 ≥ For your safety, be sure not to connect or handle the equipment with wet hands. CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT...

VQT2J51 95 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.For proper treatmen...

EU Environment friendly printed on chlorine free bleached paper. © Panasonic Corporation 2009 Panasonic Corporation Web Site: http://panasonic.net p Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing CentrePanasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany ...