Panasonic CQ-VA707N - Manuals

6 CQ-VA707N E N G L I S H 3 Battery Insertion i | j i { j i { j i | j | { | { Slide ¡ Battery type: Batteries to be used: Two manganese UM4 dry cells (R03) (do not use alkaline drycells.) ¡ Battery life: About 5 months under normal conditions of use. (Manganese dry cells at normaltemperature) 1. Ope...

7 CQ-VA707N E N G L I S H 4 Names of Controls Remote Control Unit To use the remote control, direct it at REMOTE (remote control light sensor) on thedisplay unit. ( a the next page) Warning: For safe driving, the operation is possible only when stopped with the parking brake engaged. “WARN-ING” will...

8 CQ-VA707N E N G L I S H 5 [1] (CH z ) button [4] (RANDOM) button [TA] button [2] (CH x ) button [5] (SCAN) button [AF] button [3] (TITLE) button [6] (REPEAT) button [PTY] button [LOC] button There are differences in the control buttons between the display unit and the remote control unit. If the d...

9 CQ-VA707N E N G L I S H 6 AM/FM VTR1 VTR2 CH·C TV VOLUME VOLUME PWR PWR OPEN/CLOSE OPEN/CLOSE MODE MODE TILT TILT MUTE CQ-VA707N CQ-VA707N CQ-VA707N VOLUME PWR OPEN/CLOSE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVE...

10 CQ-VA707N E N G L I S H 7 Display Unit Connector Radio Antenna Connector Ground Terminal Power Supply Connector Reset Switch FRONT VTR1 right audio input(R) : Red VTR1 left audio input(L) : White VTR1 video input: Yellow VTR1 In CD Changer Pre-out (Front)(R): Red(L): White Pre-out (Rear)(R): Red(...

11 CQ-VA707N E N G L I S H 8 Before Use Power on Press [PWR] (Power) or [MODE] to switch on the power. * When using the display unit, press [MODE] (PWR) to switch on the power. [Default : FM mode] Power off Press [PWR] again to switch off the power. Or, press and hold [MODE] for more than 2 seconds ...

12 CQ-VA707N E N G L I S H 9 Vertical Angle (TILT) and Forward-Backward Position (SLIDE) Adjustment The angle adjustment is approximate and may deviate slightly fromthe set value depending on the installation position and other condi-tions. [Default : TILT 3/SLIDE FRONT] 1 2 3 4 5 approx.110 ° appro...

13 CQ-VA707N E N G L I S H 10 Folding Down the Display Temporarily Folding down the display unit is convenient for gaining access to theair conditioner controls, for example. Press [TILT] on the display unit to fold down the display unit to 20° from horizontal position.Press [TILT] on the display un...

14 CQ-VA707N E N G L I S H 11 Before Use (Continued) Using the Menu/Menu Control Menu Tree USER(User Settings) RDS(RDS Settings) SOUND(Sound Settings) SCREEN(Screen Adjustment) TILT/SLIDE Monitor Position - Tilt and Slide (page 16) CLOCK Clock Settting (page 17) NAVI SETUP Car Navigation Set up (pag...

16 CQ-VA707N E N G L I S H 13 User Settings q Press [MENU] to display the menu. Press [ ] ] or [ [ ] to select “USER”. Press [ { ] or [ } ] to select “TILT/ SLIDE”. w Press [ENTER] to set “TILT/SLIDE”. SLIDE: Press [ ] ] or [ [ ] to move the display to the front orrear position. Note: Position “REAR...

19 CQ-VA707N E N G L I S H 16 1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI MENU PWR ENTER MUTE VOLUME TRACK DISC/BAND NAVIGATION CH z CH x RANDOM SCAN REPEAT TITLE ASPECT OPEN/CLOSE Car AV 1 2 3 4 5 6 MENU ENTER [MENU] [ENTER] [ } ][ { ] , [ ] ][ [ ] q Press [MENU] to display the main menu.Press [ ] ] or [...

20 CQ-VA707N E N G L I S H 17 t Enter the new ID code of 4 digitsagain using the buttons [1] to [6] . (Only for remote control) Caution: Record your registered ID code andkeep it in a secure location. How to change your ID code If you wish to change your already set ID code for a new ID code, fol-lo...

Note: When failing in entering ID code, a screen on the right is dis-played, and the unit beeps threetimes. Enter a correct ID code.In case of failing in entering ID codethree times consecutively, the poweris turned off. Turn on the poweragain and enter a correct ID code inthis case. 21 CQ-VA707N E ...

23 CQ-VA707N E N G L I S H 20 Connection example See pages 55 to 61 about electrical connections for detail. Panasonic Car Navigation System(CN-DV2000EN) Connect to RGB connector.When using DVD Player of CN-DV2000EN, connect to VTR1 . DVD output RGB: car navigation RGB VTR1 CN-DV2000EN CQ-VA707N Oth...

24 CQ-VA707N E N G L I S H 21 Rear View Camera Connect to a video input of VTR1 or VTR2. VTR1 VTR2 Rear View Camera CQ-VA707N TV Tuner (CY-TN1500PEN) Connect to VTR1 or VTR2. VTR1 REMOTE REMOTE VTR2 CY-TN1500PEN CQ-VA707N Others equipment such as video camera Connect to VTR1 or VTR2. VTR1 VTR2 CQ-VA...

25 CQ-VA707N E N G L I S H 22 Example of connecting to two or more products VTR1 VTR2 CY-TN1500PEN DVD output RGB: car navigation CN-DV2000EN CQ-VA707N REMOTE Panasonic Car Navigation System (CN-DV2000EN), TV Tuner (CY-TN1500PEN)and Rear View Camera (DVD Player ofCN-DV2000EN is not used.) Car Naviga...

28 CQ-VA707N E N G L I S H 25 q Press [MENU] to display the main menu.Press [ ] ] or [ [ ] to select “SOUND”.Press [ { ] or [ } ] to select “TONE”. w Press [ENTER] to set “TONE”. e Press [ { ] or [ } ] to select “BASS” or “TREBLE”.Press [ ] ] or [ [ ] to decrease or increase the level. Sound Setting...

29 CQ-VA707N E N G L I S H 26 q Press [MENU] to display the main menu.Press [ ] ] or [ [ ] to select “SOUND”. Press [ { ] or [ } ] to select “LOUD”. w Press [ENTER] to switch the loudness as follows. Loudness Enhance treble and bass tones when listening at low or mediumvolume. [Default: ON] Notes: ¡...

30 CQ-VA707N E N G L I S H 27 1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI MENU PWR ENTER MUTE VOLUME TRACK DISC/BAND NAVIGATION CH z CH x RANDOM SCAN REPEAT TITLE ASPECT OPEN/CLOSE Car AV MENU ENTER [MENU] [ENTER] [ } ][ { ] , [ ] ][ [ ] q Press [MENU] to display the main menu.Press [ ] ] or [ [ ] to sele...

31 CQ-VA707N E N G L I S H 28 q Press [MENU] to display the main menu.Press [ ] ] or [ [ ] to select “SCREEN”. Press [ { ] or [ } ] to select “COLOR”. w Press [ENTER] to set “COLOR”. e Press [ ] ] or [ [ ] to lighten or deepen the depth of color on thedisplay. 1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI M...

1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI MENU PWR ENTER MUTE VOLUME TRACK DISC/BAND NAVIGATION CH z CH x RANDOM SCAN REPEAT TITLE ASPECT OPEN/CLOSE Car AV MODE 32 CQ-VA707N E N G L I S H 29 ¡ Press [MUTE] again to cancel. [ } ][ { ] (VOLUME) [MUTE] Volume Press [ } ] or [ { ] to increase or decrease th...

Notes: ¡ If the navigation mode is ON, onlythe audio signal is switched whilethe video signal remains as it is. ¡ The mode can be changed evenwhen the display unit is in theretracted position. ¡ The [MODE] button on the front of the display unit remains lit evenwhen the power is off. 34 CQ-VA707N E ...

35 CQ-VA707N E N G L I S H 32 1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI MENU PWR ENTER MUTE VOLUME TRACK DISC/BAND NAVIGATION CH z CH x RANDOM SCAN REPEAT TITLE ASPECT OPEN/CLOSE Car AV 1 2 3 4 5 6 MODE ENTER [MODE] [ ] ][ [ ] (TRACK) [ENTER] [ } ][ { ] (BAND) Numeric button Station Preset FM1, FM2, FM3...

36 CQ-VA707N E N G L I S H 33 Radio Data System (RDS) Some FM stations are broadcasting added data compatible with RDS. This radio set offers convenientfunctions using such data.RDS service availability varies with areas. Please understand if RDS service is not available in your area,the following s...

37 CQ-VA707N E N G L I S H 34 1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI MENU PWR ENTER MUTE VOLUME TRACK DISC/BAND NAVIGATION CH z CH x RANDOM SCAN REPEAT TITLE ASPECT OPEN/CLOSE Car AV AF When reception is poor, an RDS station broadcasting the same program is tuned in automatically. AFsensitivity can b...

38 CQ-VA707N E N G L I S H 35 q Press [MENU] to display the main menu. Press [ ] ] or [ [ ] to select “RDS”. Press [ { ] or [ } ] to select “REGION”. Notes: ¡ Press [MODE] to close the main menu and the setting/adjusting menu. ¡ Press [MENU] in the setting/adjusting menu to return to the main menu m...

42 CQ-VA707N E N G L I S H 39 1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI MENU PWR ENTER MUTE VOLUME TRACK DISC/BAND NAVIGATION CH z CH x RANDOM SCAN REPEAT TITLE ASPECT OPEN/CLOSE Car AV 1 2 3 4 5 6 ENTER [ENTER] Numeric button 1 2 3 4 5 6 News Speech Preset No. Program Type Display Sport Pop. Music Clas...

43 CQ-VA707N E N G L I S H 40 w Press [ ] ] , [ [ ] , [ { ] or [ } ] to select the language. 1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI MENU PWR ENTER MUTE VOLUME TRACK DISC/BAND NAVIGATION CH z CH x RANDOM SCAN REPEAT TITLE ASPECT OPEN/CLOSE Car AV MENU ENTER [MENU] [ENTER] [ } ][ { ] , [ ] ][ [ ] PTY L...

44 CQ-VA707N E N G L I S H 41 1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI MENU PWR ENTER MUTE VOLUME TRACK DISC/BAND NAVIGATION CH z CH x RANDOM SCAN REPEAT TITLE ASPECT OPEN/CLOSE Car AV 3 MODE [MODE] CD Changer Basics ¡ An optional changer (CX-DP88N, for example) must be connected. ¡ Use of the optional...

45 CQ-VA707N E N G L I S H 42 Track Selection ¡ Press [ [ ] (TRACK) to advance to the next track. ¡ Press [ ] ] (TRACK) to start play from the beginning of the track now playing. ¡ Press [ [ ] (TRACK) or [ ] ] (TRACK) repeatedly to skip the desired number of tracks. Track Search ¡ Press and hold [ [...

46 CQ-VA707N E N G L I S H 43 Track Scan (Only for remote control) Play the first 10 seconds of each track on the disc in sequential order,starting from the track following the one you are currently listening to. ¡ Press [5] (SCAN). The first 10 seconds of each track on the discs play in sequence.Af...

47 CQ-VA707N E N G L I S H 44 1 2 3 4 5 6 TA AF PTY A LOC MODE NAVI MENU PWR ENTER MUTE VOLUME TRACK DISC/BAND NAVIGATION CH z CH x RANDOM SCAN REPEAT TITLE ASPECT OPEN/CLOSE Car AV Dual CD Changer (Only for remote control) Note: This function is not available when there is no disc in the con- necte...

48 CQ-VA707N E N G L I S H 45 Auxiliary ¡ Watching the Image or listening to the sound of a connected external device ¡ Connect a mobile video deck, video camera, rear-view camera, or car navigationsystem, for example. WARNING: For safe driving, the operation is possible only when stopped with the p...

49 CQ-VA707N E N G L I S H 46 TV707W TV707W VIDEO VOLU ME VOLUME PWR OPEN/CLOSE AV IN AUDIO IN-DASH 7.0 WIDE COLOR LCD TV MODE TILT MUTE MUTE TV707W VOLU ME MUTE ASPECT ASPECT CQ-VA707N REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER NAVIGATION NAVIGATION MENU MENU ENTER NAVI NAVI A DISC DISC/BAND...

50 CQ-VA707N E N G L I S H 47 ❏ Transportation bracket removal Be sure to remove the transportation brackets before use (installation).Use screws (5 mm φ x 6 mm) with washers for installation. Be careful not to lose these screws. Display Unit Binding-HeadScrews (5 mm φ x 6 mm) Binding-HeadScrews (5 ...

51 CQ-VA707N E N G L I S H 48 Installation Precautions This product should be installed by a professional installer, if possible.In case of difficulty, please consult your nearest authorized Panasonic Service Center. 1. This system is to be used only in a 12-volt, DC battery system (car) with negati...

52 CQ-VA707N E N G L I S H 49 Installation (Continued) ¡ When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure yourhands and fingers. ¡ We strongly recommend you to wear gloves for installation work to protect yourself from injuries. !7 Subconnector Insert...

Qty Diagram Item No. Display Unit/Control UnitConnecting Cord Hex. Nut (5 mm φ ) !8 Subconnector Screw (5 mm φ ) 53 CQ-VA707N E N G L I S H 50 Mounting Spring Trim Plate ❏ Supplied Hardware i q 1 w Mounting Collar 1 e 2 r Mounting Bolt (5 mm φ ) 1 t 1 y Tapping Screw (5 mm φ x 16 mm) 1 2 o Velcro Ta...

❏ To Remove the Display Unit a) Push the right and left clamp plates outwards, one at a time, and pull the display unit towardyourself. b) After removing the right and left clamp plates, pull the unit with both hands till it comes off. 54 CQ-VA707N E N G L I S H 51 Installation (Continued) Push here...

55 CQ-VA707N E N G L I S H 52 Electrical Connections Cautions: ¡ To prevent damage to the unit, be sure to follow the connection diagram as follows. ¡ Remove about 5 mm of protective covering from the ends of the leads before connecting. ¡ Do not insert the power connector into the unit until the wi...

58 CQ-VA707N E N G L I S H 55 Electrical Connections (Continued) Example 2: Advanced System Connection with DVD Player (CX-DV1500PEN), Digital Surround Processor (CY-AC300EX), and PowerAmplifiers (CY-M9054EN and CY-M7052EN). CY-AC300Operating Unit CY-AC300 Main Unit (Rear) (Front) Operating Unit/Mai...

61 CQ-VA707N E N G L I S H 58 Connecting the Parking Brake Connection Lead Parking Brake Foot Brake – + (Blue w/yellow stripe) Parking Brake Connection Lead Parking Brake Switch Battery Vehicle Chassis Brake Light !4 Clip Connector SIDE BRAKE The parking brake switch positionvaries with the vehicle ...

62 CQ-VA707N E N G L I S H 59 Troubleshooting Maintenance Your product is designed and manufactured to ensure a minimum of maintenance. Use a soft cloth for rou-tine exterior cleaning. Never use benzine, thinner or other solvents. ( a page 66) When Something Doesn’t Work Check the charts for possibl...

Unit won’t turn on. No disc at all in maga-zine 63 CQ-VA707N E N G L I S H 60 Press EJECT button on changer.If trouble persists, press thereset button on changer.Trouble still persists, ask yourdealer or nearest service centerfor repair. Probable Solution Disc dirty or wrong sideup Problem Display P...

66 CQ-VA707N E N G L I S H 63 Maintenance To prevent damage to the system exterior Do not apply pesticides, benzine, thinner or other volatile substances tothe unit.The cabinet surface primarily consists of plastic materials.Do not wipe with benzine, thinner or similar substances because thiswill re...

67 CQ-VA707N E N G L I S H 64 Specifications Power Supply : 12 V DC (11 V - 16 V), test voltage 14.4 V negative ground Current Consumption : 7 A (at rated VTR operation output) Audio Input Sensitivity : 0.5 Vrms (VTR) Pre-output Voltage : 4 V (CD Changer Play Mode; 1 kHz 0 dB) Video input signal : C...