Panasonic CQ-C1505W - Manuals

Page 2 - Safety Information; Warning; Observe the following warnings when installing.

Safety Information  Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting ...

Page 3 - Observe the following cautions when using this unit.

Caution Observe the following cautions when using this unit.  Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffi c conditions while driving.  This unit is designed for use exclusively in automobiles.  Do not operate the unit for a prolon...

Page 4 - Before Reading These Instructions

Panasonic welcomes you to our constantly growing family of electronic products owners.We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built...

Page 5 - Accessories

Accessories Installation kit (YEP0FZ5698) Q’ty: 1 Lock Cancel Plate Mounting Bolt (5 mm  ) Rubber Bushing Mounting Collar (YEFX0217263A) Q’ty: 1 Trim Plate (YEFC051020) Q’ty: 1 Power Connector (YGAJ021009) Q’ty: 1 Remote Control Unit (includes a battery) (EUR7641010) Q’ty: 1 Removable Face Plate Ca...

Page 6 - Specifi cations; General

YEFM285920A FT1106-1116 Printed in China Specifi cations General Power supply : DC 12 V (11 V – 16 V DC), test voltage 14.4 V, negative ground Current consumption : Less than 2.1 A (CD mode; 0.5 W x 4 channels) Maximum power output : 50 W x 4 channels (at 1 kHz), volume control maximum Power output ...

Page 7 - Preparation; First T; Clock Display at Power Off

Preparation 1 Set your car’s ignition switch to the ACC or ON position. 2 Press [SOURCE] (PWR: Power ) . C C A N O First T ime Power On Batter y Installation Clock Setting The 24-hour system is used for the clock. 1 Press [DISP] . (clock display) 2 Hold down [DISP] for more than 2 seconds. Hour blin...

Page 8 - Removing; Mounting; Cleaning the; Face Plate Removing/Mounting

Maintenance/Fuse Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents. If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Center. Anti-T...

Page 9 - Notes on Discs

Notes on Discs • You may have trouble playing back some CD-R/RW discs recorded using CD recorders (CD-R/RW drives), either due to their recording characteristics or dirt, fi ngerprints, scratches, etc. on the disc surface. • CD-R/RW discs are less resistant to high temperatures and high humidity tha...

Page 11 - Remote Control Unit; Functions; Direct Access

Remote Control Unit Functions Notes: • This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)• Aim the remote control at the remote sensor and operate it. [0] to [9] selects a preset station (1 to 6), presets the current station (Hold i...

Page 12 - Source Selection; Volume Adjustment; General Operations

General [VOL] (Volume) [SOURCE] (Source) selects a source. [PWR] (Power) toggles power on/off. Power On/Off Set your car’s ignition switch to the ACC or ON position. Power on: Press [SOURCE] (PWR). Power off: Hold down [SOURCE] (PWR) for more than 1 second. Source Selection Press [SOURCE] to change ...

Page 13 - Operation Flow; Frequency adjustment; Preset station selection

Radio (AM/FM) Operation Flow [BAND] selects a band in the radio source. [APM] (Auto Preset Memory) executes APM in the radio source. (Hold it down for more than 2 seconds.) [SOURCE] (Source) selects a source. Preset buttons [1] to [6] selects a preset station in the radio source,and presets the curr...

Page 14 - Radio Source Display

Display change Press [DISP] to change the display. Radio mode display (Default) Clock display Auto Preset Memory (APM) With this operation, stations with good receiving conditions can be automatically stored in the preset memory. 1 Select a band. 2 Hold down [BAND] (APM) for more than 2 seconds. The...

Page 15 - Audio Settings; Audio menu

Audio Settings [VOL] selects a value in the audio menu. (PUSH SEL) (Push to select) selects items in the audio menu. [DISP] (Display) exits from the audio menu. Audio menu 1 Press [VOL] (PUSH SEL) to display the audio menu display. Note: If no operation takes place for more than 5 seconds in the aud...

Page 17 - Display change; Player Source Display; Random play

Display change Press [DISP] to change the display. Notes: • For scrolling text, press [3] (SCROLL) . • “NO TEXT” is displayed when there is no information on the disc. Player Source Display Random, Repeat, Scan Random play All the available songs (tracks/fi les) are played in a random sequence. Pres...

Page 18 - Troubleshooting; Common; Disc Player

If You Suspect Something Wrong Check and take steps as described below.If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Service Center. The product should be serviced only by qualifi ed personnel. Please refer the checking...

Page 19 - Memorandum