Panasonic AW-PB302 - Manuals

Page 2 - CAUTION

NOTE: This equipment has been tested and found to com-ply with the limits for a Class A digital device, pursuant topart 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interferencewhen the equipment is operated in a commercial environ-ment. This equip...

Page 3 - CONTENTS

-1- CONTENTS PREFACE ................................................................................................................................................................................ 2 SPECIAL NOTES ON OPERATION ............................................................................

Page 4 - PREFACE; • Power Off Before Connecting or Disconnecting

-2- • When the RGB card is installed in a convertible camera, for example, AW-E300, R/G/B or Y/Pr/Pbcomponent signals can be output. PREFACE SPECIAL NOTES ON OPERATION • Power Off Before Connecting or Disconnecting Cables Before plugging or unplugging the cables, be sureto switch power off. • Handle...

Page 5 - PRECAUTIONS

-3- PRECAUTIONS • Ask a qualified service person for repairs when necessary. • Do not attempt to disassemble the camera, Remote Control Unit (RCU) or other units. In order to pre-vent electric shock, do not remove screws or cov-ers. There are no user-serviceable parts inside. • Do not let water, met...

Page 6 - MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

-4- MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Video/RGB Output Connector [VIDEO/RGB] Composite signals, RGB/YPrPb/YC component signals,and synchronizing signals are output.These output signals can be selected using the menu.Use the special cable WV-CA9T5 (Dsub-BNC) or WV-CA9T9 (Dsub-Dsub) to conn...

Page 7 - MOUNTING

-5- MOUNTING • Be sure to ask your store, where you purchased the product, for mounting. • Disconnect the camera power connector before mounting. • Before handling the card, touch a metal part of the camera to discharge the static from thehuman body.An anti-static wrist strap is recommended foradded...

Page 9 - Connecting RGB Monitor or Image Processor

-7- – + MENU ITEM/AWC YES/ABC NO/BAR OPTION CARD VIDEO OUT I/F REMOTE G/L IN IRIS DC12V IN ON POWER OFF POWER O I FUSE(POWER) 125V 3.15A FUSE FUSE AC Adaptor AW- PS505 RGB monitor/image processor DC power cable AW-CA4T1 AC adapter AW-PS505 AC120V60Hz Computer RGB/SYNC terminal WV-CA9T9 WV-CA9T5 or V...

Page 10 - MENU ITEM SETTING; MAIN MENU SCREEN

-8- MENU ITEM SETTING ● MAIN MENU SCREEN **Halogen Mode Set** Brightness Set Color Set G/L. Color Bar Set Sharpness Set Other Set Option Card Set Initialize Data End Use Mode Blinking **User Mode Set** Iris, Shutter, Gain Set Color Set G/L. Color Bar Set Detail Set1 Detail Set2 Color Matrix Set Othe...

Page 12 - APPEARANCE

-10- APPEARANCE mm (inch) VIDEO/RGB 70 (2-3/4) 21.5 (27/32) 99 (3-7/8) 91 (2-3/4) 8 (5/16)

Page 13 - SPECIFICATIONS

-11- Video output: NTSC composite: 1 V[p-p] (75 Ω ) R/G/B: 0.7 V[p-p] (75 Ω ) Y/C: Y: 1 V[p-p], C: 0.286 V[p-p] Y/Pr/Pb: Y: 1 V[p-p], Pr/Pb: 0.7 V[p-p] SYNC: 2 V[p-p] (75 Ω , selected output from 9-pin Dsub connector or 50-pin Dsub camera connector) Switch: Component output switching (selected with ...