Panasonic AW-PB301 - Manuals

Page 2 - CAUTION

NOTE: This equipment has been tested and found to com-ply with the limits for a Class A digital device, pursuant topart 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interferencewhen the equipment is operated in a commercial environ-ment. This equip...

Page 3 - CONTENTS

-1- CONTENTS PREFACE ................................................................................................................................................................................ 2 SPECIAL NOTES ON OPERATION ............................................................................

Page 4 - PREFACE; SPECIAL NOTES ON OPERATION

-2- • When the studio card AW-PB301/AW-PB305 is installed in a convertible camera, for example, AW-E300, the electronic viewfinder (EVF) and intercomwill be usable, making it possible to use the camerain studios. PREFACE • When the studio card AW-PB301 is installed in a convertible camera, for examp...

Page 5 - PRECAUTIONS

PRECAUTIONS • Ask a qualified service person for repairs when necessary. • Do not attempt to disassemble the camera, Remote Control Unit (RCU) or other units. In order to pre-vent electric shock, do not remove screws or cov-ers. There are no user-serviceable parts inside. • Do not let water, metal, ...

Page 6 - MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS; LEVEL; ON

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS -4- q Viewfinder connector [EVF] Connect the cable for the viewfinder mountingbracket AW-Q40. w Viewfinder standby switch [ST.BY/ON] When this switch is set to [ST.BY], the viewfinder willbe in standby condition.The position ON, the picture is shown in th...

Page 7 - MOUNTING

-5- MOUNTING • Be sure to ask your store, where you purchased the product, for mounting. • Disconnect the camera power connector before mounting. • Before handling the card, touch a metal part of the camera to discharge the static from thehuman body.An anti-static wrist strap is recommended foradded...

Page 9 - CONNECTING A STUDIO SYSTEM

-7- • To connect an RCU (WV-RC700A or WV-RC550) to the camera, use the RCU cable AW-CA50A26.• To mount the 5-inch electronic viewfinder WV-VF65C on the camera, use the viewfinder mounting bracket AW-Q40.• Power is supplied from the RCU. GEN-LOCK IN AUX IN AUTO 75 ¶ /Hi-Z AUTO 75 ¶ /Hi-Z R/PR /C OUT ...

Page 10 - MENU ITEM SETTING; MAIN MENU SCREEN

-8- MENU ITEM SETTING ● MAIN MENU SCREEN **Halogen Mode Set** Brightness Set Color Set G/L. Color Bar Set Sharpness Set Other Set Option Card Set Initialize Data End Use Mode Blinking **User Mode Set** Iris, Shutter, Gain Set Color Set G/L. Color Bar Set Detail Set1 Detail Set2 Color Matrix Set Othe...

Page 12 - Option Card Setting Submenu

-10- **Opation Card Set** Zebra Indicator ON Zebra 1 Level 70% Zebra 2 Level 85% Safety Zone I EVF Output Y Component R/G/B Return **Opation Card Set** Zebra Indicator ON Zebra 1 Level 70% Zebra 2 Level 85% Safety Zone I EVF Output Y Return AW-PB301 AW-PB305 ■ Option Card Setting Submenu q Zebra Ind...

Page 14 - APPEARANCE

-12- APPEARANCE mm (inch) LEVEL INCOM EVF ST.BY ON 70 (2-3/4) 21.5 (27/32) 96 (3-3/4) 91 (2-3/4) 5 (3/16)

Page 15 - SPECIFICATIONS

-13- Video output: Y/C: Y: 1.0 V[p-p], C: 0.286 V[p-p] R/G/B: 0.7 V[p-p] (AW-PB301 only) Y/Pr/Pb: Y: 1.0 V[p-p], Pr/Pb: 0.7 V[p-p] (AW-PB301 only) SYNC: 2.0 V[p-p] sync signal (AW-PB301 only) VF output: 1.0 V[p-p], composite, high impedance Intercom jack: 3.5 mm in diameter Switch: Switching on the ...