Page 2 - Safety precautions; • TO R E D U C E T H E R I S K O F F I R E O R; THIS APPARATUS MUST BE EARTHED
2 indicates safety information. This class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. For CANADA Safety precautions WARNING: • TO R E D U C E T H E R I S K O F F I R E O R ELECTRIC SHOCK, DO NOT EXPOSE THIS APP...
Page 3 - indicates safety information.; IMPORTANT SAFETY INSTRUCTIONS
3 indicates safety information. Safety precautions <For USA-California Only>This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply.See www.dtsc.ca/gov/hazardouswaste.perchlorate. 1) Read these instructions. 2) Keep these instructio...
Page 4 - Contents
4 Contents Description ................................................ 6 Features ..................................................... 6 Precautions for use .................................. 7 1. Functions in each area ......................... 8 1-1. Control panel ..................................
Page 5 - -1. Setting the SDI input signals and analog input; Specifications and standard
5 Contents 4. Input/output signal settings............... 61 4-1. Setting the SDI input signals and analog input signals .............................................................61 4-1-1. Setting the frame synchronizer .................614-1-2. Setting the input mode ...............................
Page 6 - Compact design, wide variety of input/output signals; The input optional board contains an up-converter.; Many different effect functions incorporated
6 Description This is a 1 ME digital video switcher which supports a multiple number of HD and SD formats.Despite its compact dimensions, the video switcher comes standard with 4 input connectors and can support 8 input connectors when an option board is used. It also has a multi view display functi...
Page 7 - Precautions for use; Caution
7 Precautions for use Handle carefully. Do not drop the product, or subject it to strong shock or vibration. Do not carry or move the product by the fader lever. This is important to prevent trouble. Use the product in an ambient temperature of 32 °F to 104 °F (0 °C to 40 °C). Avoid using the pr...
Page 8 - Functions in each area; ALARM TYPE
8 1. Functions in each area 1-1. Control panel POWER ALARM F1 F2 F3 F4 F5 KEY DSK PinP AUX CLN PVW PGM 1 2 USER AUX SOURCE AUX BUS DELEGATION 1 2 3 4 5 6 7 8 9 10 AUX PGM/A PST/B BKGD PATT KEY PATT FUNC N/R R WIPE DIRECTION WIPE PATTERN / FUNCTION ON WIPE SQ SL 3D POSITIONER Z ON FTB PinP DSK CUT AU...
Page 9 - output to the AUX bus.; AUX bus crosspoint buttons
9 1. Functions in each area 1-2. Crosspoint area F1 F2 F3 F4 F5 KEY DSK PinP AUX CLN PVW PGM 1 2 USER AUX SOURCE AUX BUS DELEGATION 1 2 3 4 5 6 7 8 9 10 AUX PGM/A PST/B AMB:FILL / GRN:SOURCE 3 PGM/A bus crosspoint buttons [PGM/A 1 to 10] These are used to select the PGM/A bus video signals...
Page 10 - Wipe pattern selector buttons; BKGD, KEY pattern selector buttons
10 1. Functions in each area 1-3. Wipe area 8 Wipe pattern selector buttons These 12 buttons are used to select the corresponding wipe patterns while the indicator of the [BKGD PATT] button ( 9 ) or [KEY PATT] button ( 9 ) is lighted. They are used to select the corresponding setting menus when the ...
Page 12 - This executes the background transition when the [AUTO] button (; KEY ON tally LED; This lights in red when the key ON status is established.; MIX, WIPE selection status tally LEDs
12 1. Functions in each area 1-5. Transition area KEY PATT FUNC N/R R WIPE DIRECTION WIPE PATTERN / FUNCTION ON FTB PinP DSK CUT AUTO MIX WIPE BKGD KEY MIX WIPE DSK PinP IN/OUT MEMORY XPT SYSTEM 7 8 9 10 11 12 > [BKGD] button This executes the background transition when th...
Page 13 - ) is at an interim setting, the transition is executed; Wipe direction selection buttons; Wiping proceeds in the normal direction.; Fader lever
13 1. Functions in each area D [AUTO] button This is used to automatically execute transitions (auto transition) using the transition time which has been set.During auto transition its indicator lights in amber. When the button is pressed again during auto transition, the auto transition operation i...
Page 14 - LCD; ) is pressed and its indicator is; Rotate this rotary encoder to switch the sub menu.; Adjust Clip
14 1. Functions in each area 1-6. LCD menu area L LCD The setting menus are displayed on the LCD.When the [FUNC] button ( ; ) is pressed and its indicator is lighted and then one of the wipe pattern selector buttons ( 8 ) is pressed, the setting menu is displayed.When the buttons listed below are do...
Page 15 - PinP position setting; Chroma key area
15 1. Functions in each area 1-7. Positioner area N Positioner [X/Y] These are used when performing the settings below. PinP position setting Wipe start position setting (WIPE, SQ #5) Camera control Flying key position setting POSITIONER Z Chroma key area In each case, the settings take effect o...
Page 16 - SD memory card slot; SD Logo is a trademark.; SD memory card access LED; Concerning the recommended SD memory cards
16 1. Functions in each area 1-8. SD memory card area P SD memory card slot The SD memory card (sold separately) is inserted into this slot. SD Logo is a trademark. Q SD memory card access LED This LED lights while the data on the SD memory card is being accessed.Do not turn off the unit’s power...
Page 17 - SDI signal input connectors [SDI INPUTS 1 to 4]; SDI signal input; Reference input connector/BB output
17 1. Functions in each area 1-9. Rear panel connections area POWER 1 REF SLOT2 2 SLOT 4 2 3 4 SLOT1 1 SLOT2 8 ～ IN SDI INPUTS TALLY 6 6 INPUTS SDI OUTPUTS IN OUT 3 IN OUT 2 IN OUT 1 IN OUT OUTPUTS 1 5 7 SLOT OFF 2 SLOT1 5 SLOT SLOT PGM RS-422 LAN ON ANALOG INPUTS Y Pb Pr Y Pb Pr DVI INPUTS ANALOG O...
Page 18 - For details on connection, refer to “6. External interfaces”.; Ground connector; Connect to the system’s earth ground.; AC power input socket [; This is used to turn the power on and off.
18 1. Functions in each area Y LAN connector [LAN] (RJ-45) (10BASE-T) Z RS-422 interface connector [RS-422] (D-sub 9-pin, female, inch screw) For details on connection, refer to “6. External interfaces”. [ Tally output connector [TALLY] (D-sub 15-pin, male, inch screw) For details on connection,...
Page 19 - Table of optional boards
19 2. System 2-1. Configuration AV-HS400AN PGM PVW A UX Multi K eyOut INPUT1(SDI) INPUT2(SDI) INPUT3(SDI) INPUT4(SDI) INPUT5 UC UC UC UC INPUT6 INPUT7 INPUT8 Black ColorBGD ColorBar FMEM1 FMEM2 REF PGM1, 2(SDI) OUTPUT1(SDI) OUTPUT2(SDI) OUTPUT4 OUTPUT3 OUTPUT6 OUTPUT5 PGM1, 2 OUTPUT 1, 2 OUTPUT 5, 6...
Page 21 - • Example where the optional board is used
21 2. System Connections when not implementing gen-lock (frame synchronizer ON) • Example where the optional board is used POWER 1 REF GPI SLOT2 2 SLOT 4 2 3 4 SLOT1 1 SLOT2 8 ～ IN SDI INPUTS TALLY 6 6 INPUTS SIGNAL SDI OUTPUTS GND IN OUT 3 IN OUT 2 IN OUT 1 IN OUT OUTPUTS 1 5 7 SLOT OFF 2 SLOT1 5...
Page 22 - A/B Off Off
22 3. Basic operations 3-1. Background transition 3-1-1. Selecting the bus Press the crosspoint buttons to select the material which will be targeted for the background transition. By pressing these buttons, the signals are selected, and the indicators of the selected buttons light. The color in whi...
Page 23 - time remaining from the interim setting.
23 3. Basic operations 3-1-3. Selecting the transition mode Press the [BKGD] button in the transition area so that its indicator lights in amber. When the [BKGD] button and [KEY] button are pressed at the same time, both buttons are selected. Use the [MIX] and [WIPE] buttons in the transition area t...
Page 24 - WIPE
24 3. Basic operations 3-2. Wipe 3-2-1. Selecting the wipe pattern BKGD PATT KEY PATT FUNC WIPE PATTERN / FUNCTION ON WIPE SQ SL 3D PAGE TIME WIPE COLOR KEY CHR KEY FREEZE DSK PinP IN/OUT MEMORY XPT SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 The wipe patterns which are allocated to the 12 wipe pattern button...
Page 25 - Setting the border and soft effect; Turn [F3] to set the width of the border using the Width; Setting the border color; To save the values that were set before calling the
25 3. Basic operations 3-2-2. Selecting the wipe direction Operate the wipe direction selector buttons to select the wipe direction for the background transition. (The key transitions are set by the menu. The direction which is set here will not be reflected. See 3-3-3.) When the [R] indicator is ...
Page 27 - Setting the lighting effect; On; Setting the trimming; No trimming; Off: All input materials are targeted for automatic trimming.
27 3. Basic operations 3-2-5. Modifying wipe Setting the lighting effect Lighting effects can be added when the following wipe patterns have been selected: 3D page: #1, #3, #7, #9 1 Press the [FUNC] button to light its indicator, and press the [WIPE] button to display the WIPE menu. 2 Turn [F1] to...
Page 28 - Background image; How key combinations work is shown in the figure below.; Background
28 3. Basic operations 3-3. Key This operation combines the background image with another image. The key definition can be adjusted, and an edge can be added to the combined image. Also available as materials besides KEY for combining with the background image are PinP (picture in picture) and DSK (...
Page 29 - generation of the key signals.; Bus: The bus signal is used for the key fill signal.
29 3. Basic operations 3-3-1. Selecting the key type 1 Press the [FUNC] button to light its indicator, and press the [KEY] button to display the KEY menu. 2 Turn [F1] to display the KEY sub menu. 3 Turn [F2] to select the Type item. <Menu display> KEY Type LumKey Fill PVW 1/9 Linear ChrmOff Bu...
Page 30 - Selecting the key fill and key source signals; Lighting in amber; Lighting in green; Setting the fill matte color
30 3. Basic operations 3-3-2. Selecting the key material Selecting the key fill and key source signals Press the KEY button in the AUX bus selection area, and switch the selection of the key fill signal (indicator lights in amber) and key source signal (indicator lights in green). <Selecting th...
Page 31 - SQ
31 3. Basic operations 3-3-3. Key transitions 1 Select key in the transition mode. Press the [KEY] button in the transition area to light its indicator. To execute a background transition and key transition at the same time, press the [BKGD] button and [KEY] button together to turn on both indicator...
Page 32 - Execute the transition.; On: An image with key effects added is output to the preview output.; Operation
32 3. Basic operations 5 Execute the transition. Press the [AUTO] button to execute the transition automatically for the transition time which has been set. Alternatively, execute the transition manually by operating the fader lever. When the KEYAuto function has been assigned to the [FTB] button, t...
Page 33 - Oval-shaped chroma key; Executing auto sampling; Auto
33 3. Basic operations 3-3-6. Adjusting the chroma key These steps are taken to adjust the chroma key definition.Before proceeding with the adjustments, select “Chroma” as the Type item setting in “3-3-1. Selecting the key type.” The signal for the chroma key is created using a specific color tone a...
Page 34 - Adjusting the chroma key; Adjust1 Hue
34 3. Basic operations Adjusting the chroma key 1 Press the [FUNC] button to light its indicator, and press the [CHR KEY] button to display the CHR KEY menu. 2 Turn [F1] to display the Adjust1 sub menu, and turn [F2] to [F5] to set the items. <Menu display> Adjust1 Hue Sat Lum Y-Infl 2/3 100...
Page 35 - Making other adjustments; Perform the key density and key invert settings.
35 3. Basic operations Making other adjustments Perform the key density and key invert settings. 1 Press the [FUNC] button to light its indicator, and press the [KEY] button to display the KEY menu. 2 Turn [F1] to display the Adjust sub menu. <Menu display> Adjust Clip Gain Density Invert 2/...
Page 36 - A border, shadow or other edge can be added to the key.; Setting the key edge; An edge is not added.; Border: A border is added around the entire edge.; A diagonal border is added.; Setting the edge color
36 3. Basic operations 3-3-7. Key decorations A border, shadow or other edge can be added to the key. Setting the key edge 1 Press the [FUNC] button to light its indicator, and press the [KEY] button to display the KEY menu. 2 Turn [F1] to display the Edge sub menu. 3 Turn [F2] to select the edge ...
Page 37 - The key signals are not masked.; Manual: The area that is set using the MaskAdj sub menu is masked.; The signals are masked to the 4:3 aspect ratio.; RIGHT
37 3. Basic operations 3-3-8. Masking the key signals These steps are taken to mask the key signals using the mask signal of the box pattern. 1 Press the [FUNC] button to light its indicator, and press the [KEY] button to display the KEY menu. 2 Turn [F1] to display the Mask sub menu. <Menu displ...
Page 38 - Size; ABC; Key signal; PinP combinations using the flying key
38 3. Basic operations 3-3-9. Flying key Using DVE effects, this key enables the key signals that have been input to be moved, expanded or contracted. In order for the flying key to take effect, select SL #5 as the key transition. When the key transition is executed, the keys are combined by the key...
Page 39 - Another image can be combined with the background image.; Set the transition time.; PinP
39 3. Basic operations 3-4. PinP (picture in picture) Another image can be combined with the background image. 3-4-1. Selecting the PinP material Press the [PinP] button among the AUX bus selector buttons to light its indicator, and press one of the AUX bus crosspoint buttons 1 to 10 to select the P...
Page 40 - Adjusting the PinP position and size; Select the dot by dot mode; SD; Adjusting the density
40 3. Basic operations 3-4-4. PinP adjustments Adjusting the PinP position and size While the PinP menu is selected, adjust the X and Y coordinates using the positioner in the positioner area, and adjust the size using the rotary encoder [Z]. Alternatively, the settings can be performed on the men...
Page 42 - Manual: Trimming using the value set on the TrimAdj sub menu; LEFT
42 3. Basic operations 3-4-6. Trimming settings 1 Press the [FUNC] button to light its indicator, and press the [PinP] button to display the PinP menu. 2 Turn [F1] to display the Trim sub menu. <Menu display> Trim Trim Manual 5/6 Off Free 4:3 Manual Pair 3 Turn [F2] to select the trimming type...
Page 44 - Selecting the DSK fill signal and DSK source signal
44 3. Basic operations 3-5-2. Selecting the DSK material Selecting the DSK fill signal and DSK source signal Press the [DSK] button in the AUX bus selection area to switch the selection of the DSK fill signal (indicator lights in amber) and DSK source signal (indicator lights in green). <Select...
Page 45 - PVW On and Off can be allocated to the user buttons.
45 3. Basic operations 3-5-3. DSK transitions 1 Set the duration of the transition. On the TIME menu, turn [F1] to display the DSK sub menu. As with a background transition, set the transition time. 2 When the [DSK] button in the transition area is pressed, the DSK image is combined (fade-in) for th...
Page 46 - A border, shadow or other type of edge can be added to DSK.; Setting the edge
46 3. Basic operations 3-5-6. DSK decorations A border, shadow or other type of edge can be added to DSK. Setting the edge 1 Press the [FUNC] button to light its indicator, and press the [DSK] button to display the DSK menu. 2 Turn [F1] to display the Edge sub menu. 3 Turn [F2] to select the edge ...
Page 47 - The DSK signals are not masked.
47 3. Basic operations 3-5-7. Masking the DSK signals These steps are taken to mask the DSK signals using the mask signal of the box pattern. 1 Press the [FUNC] button to light its indicator, and press the [DSK] button to display the DSK menu. 2 Turn [F1] to display the Mask sub menu. <Menu displ...
Page 49 - CBGD
49 3. Basic operations 3-7. Internal color signals 3-7-1. Setting the color background The color background to be used by the bus can be set.Two methods are available: under one method the Hue (hue), Sat (color saturation) and Lum (luminance) are set, and under the other the 8 preset colors (white, ...
Page 50 - Frame: The images are frozen frame by frame.; This is used to freeze moving images.
50 3. Basic operations 3-8. Freezing the input signals The input signals can be frozen and used. If any of the input signals has been frozen, the freeze status indicator LED lights. While signals are frozen, the tally signals of the corresponding input will not be output. 3-8-1. Displaying the freez...
Page 51 - Selecting the output signals using the crosspoint buttons
51 3. Basic operations 3-9. Switching the AUX output The user can switch the AUX output signals.The signals of any of the AUX bus crosspoint button 1 to 10, PGM (program) signals, PVW (preview) signals or CLN (clean) signals can be selected for output to the AUX bus. [PGM]: The PGM signals are outpu...
Page 54 - STORE: This is used to store the panel settings in the preset memory.; PSMEM; Enable: The data stored in the preset memory is used.
54 3. Basic operations STORE: This is used to store the panel settings in the preset memory. 1 Press the [FUNC] button to light its indicator, and press the [MEMORY] button to display the MEMORY menu. 2 Turn [F1] to display the PSMEM sub menu. 3 Turn [F2], select “Store” using the Mode item, turn ...
Page 56 - SD memory card handling precautions
56 3. Basic operations 3-12. SD memory cards The unit’s frame memory data and system data can be stored on SD memory cards. Conversely, this data can be loaded from the SD memory cards to the unit. Frame memory data (still image data): The unit supports 24-bit (uncompressed) BMP (bitmap) and JPEG (b...
Page 58 - FMEM1, 2: Still image data of frame memory 1, frame memory 2; “HS400/SYSTEM” folder
58 3. Basic operations 3-12-2. Saving data on SD memory cards 1 Insert the SD memory card which has been initialized by the unit, into the SD memory card slot. 2 On the MEMORY menu, turn [F1] to display the SDCard sub menu. 3 Turn [F2] to select “Save” using the Mode item, and then press the [F2] sw...
Page 59 -
59 3. Basic operations 3-12-3. Loading data from SD memory cards 1 Insert the SD memory card on which the data is stored into the SD memory card slot. Load the file after its data has been stored in the each folder. Data stored in other folders will not be recognized by the unit. System data: “HS400...
Page 61 - -1. Setting the SDI input signals and analog input signals; synchronizer using the FS item.
61 4. Input/output signal settings 4-1. Setting the SDI input signals and analog input signals The user can set the SDI input signals and analog input signals. IN5 to IN8 can be set only when one of the following optional boards has been connected: SDI input boardAnalog input boardAnalog composite i...
Page 64 - Input image; to enter the selection.; : Toward still images; switch to enter the selection.
64 4. Input/output signal settings 4-2. Setting the up-converter (option) Select the settings for the up-converter that is built into the optional boards listed below. SDI input boardAnalog input boardAnalog composite input board 1 Press the [FUNC] button to light its indicator, and press the [IN/OU...
Page 65 - Ana: Analog input signals of the DVI connector are effective.; in accordance with the vertical resolution.; Automatic adjustment of the black level; Automatic adjustment of the white level; After the level has been adjusted, an asterisk (; Initializing the adjusted values
65 4. Input/output signal settings 4-3. Setting the DVI input signals (option) 4-3-1. Setting the DVI input signals The user can set the DVI input signals when the DVI input board (option) has been connected. Signals with the following resolutions can be input. If signals with any other resolution o...
Page 66 - Full
66 4. Input/output signal settings <DVI input scaling size table> DVI format Mode HD/1080i HD/720P SD/NTSC SD/PAL 1920 1080 1280 720 720 480 720 576 XGA1024 768 Fit-V 480 720 576 720 Fit-H Full 480 720 576 720 SXGA1280 1024 Fit-V 480 675 576 675 Fit-H Full 480 720 576 720 WXGA1280 ...
Page 68 - Signals selected by the AUX bus are output.; Connector
68 4. Input/output signal settings 4-4. Setting the output signals 4-4-1. Types of output signals There are five output signal types: PGM, PVW, AUX, MULTI and KEYOUT.Five lines of output signals can be assigned to OUTPUT1 to 6. PGM: This is the main-line output of the switcher; images with wipe, mix...
Page 70 - BBAD: Black burst signal; Ref
70 4. Input/output signal settings 4-5. Setting the sync signals The sync signals to be used by the system can be selected. External sync: For synchronization with an external sync signal (gen-lock). The reference input signal is looped through and output. BBST: Black burst signal (vertical phase of...
Page 71 - Output video signal phase adjustment; Phase
71 4. Input/output signal settings 4-6. Adjusting the output signal phase The phase of the output video signals can be adjusted. 1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu. 2 Turn [F1] to display the OutPhs sub menu. <Menu display>...
Page 72 - AVDL Range: Range for automatic phase adjustment.
72 4. Input/output signal settings <Phase adjustment setup> REF (System standard) • 1H Output (+1H) • 0H Output (1F delay for REF and in-phase output) Shortest Output (+0.5H) Longest Output (+1.5H) REF Phase Reference Output Phase Variable Range Output Phase Variable Range Output Phase Variabl...
Page 73 - Conversion based on the HD format applies for 1H.
73 4. Input/output signal settings <Phases and delay amounts of input/output signals during HD format use> Input signals FS: On, OffMode: Normal, UC or D by D (cannot be selected when the system format is 720p) Video effects Output signals 1 Delay: 90H (75H) or 1F 2 See 4-1-1. See 4-11. Fr...
Page 74 -
74 4. Input/output signal settings <Phase relationship between input signals and output signals> (for 1080/59.94i format) (Example 1) F1 F2 F1 F2 F1 F2 F1 F2 Input signals (non-synchronized) 1F (frame) Sync signal (Ref) Output signal 1 Output signal 2 (90H) Output signal 2 (1F) Max. 1F Max. 2F...
Page 75 - to
75 4. Input/output signal settings 4-7. Setting the multi view display The input images, program images and preview images can be output side by side on one screen on the external monitor. 4-7-1. Setting the screen layout The multi view display has three display modes: 10-division mode, 4-division m...
Page 77 - Select one of these character (gray scale) brightness settings.; On: The character background is displayed.; Only the red tally is displayed.
77 4. Input/output signal settings 4-7-2. Setting the split frame and characters Set the frame, character brightness and background of the split screens to be displayed on the multi view display. 1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT me...
Page 79 - Examples of OSD displays; “>” appears to the left of the selected menu.
79 4. Input/output signal settings 4-8. Setting the on-screen display (OSD) The menu screen is superimposed on the preview output or multi view display output for display. 1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu. 2 Turn [F1] to displ...
Page 81 - Setting the V ancillary data; Anci; Setting the embedded audio data
81 4. Input/output signal settings 4-10. Setting the ancillary data In this section, the function for allowing the ancillary data of the SDI input signals to pass through is set.If SD format signals are input while the HD format has been set as the system format, it will not be possible for their an...
Page 82 - switch to enter the setting.
82 4. Input/output signal settings 4-11. Setting the down-converter Select the settings for the down-converter that is built into the SDI output board (option). 1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu. 2 Turn [F1] to display the Down...
Page 83 - Setting the 16:9 squeeze mode
83 5. System settings 5-1. Selecting the video format One system (input/output signal) video format can be selected. 1 Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to display the SYSTEM menu. 2 Turn [F1] to display the Format sub menu. 3 Turn [F2], select the format ...
Page 85 - The table below lists the default settings.; Button; The timing at which the crosspoints are to be switched can be set.
85 5. System settings The table below lists the default settings. Button Signal Description XP1 BLACK Internally generated signal, black XP2 INPUT1 External video input 1: SDI XP3 INPUT2 External video input 2: SDI XP4 INPUT3 External video input 3: SDI XP5 INPUT4 External video input 4: SDI XP6 INP...
Page 86 - Button USER1; KEYAuto: The auto transition of the key is executed.
86 5. System settings 5-3. Button assignments 5-3-1. Setting the user buttons The user can assign several functions which can be set using the menu items into two user buttons (USER 1 and USER 2).The user buttons light in amber when the assigned function is ON and are off when the assigned function ...
Page 88 - The MAC address now appears.
88 5. System settings 5-5. Network settings Proceed with the network settings to perform such tasks as updating the software version via LAN.The network initial setup is: IP address: 192.168.0.10, subnet mask: 255.255.255.0 and gateway: 0.0.0.0 (unused). When using the host computer with settings ma...
Page 91 - Functions that can be controlled from the unit
91 5. System settings 5-7. Camera control A camera and pan-tilt head can be controlled from this unit.Up to five cameras can be controlled via a controller (AW-RP655N or AW-RP555N) connected to the unit’s RS-422 interface connector.The unit can also be connected directly to a pan-tilt head, and the ...
Page 92 - converter
92 5. System settings Example of connections (when the unit and a controller are connected) Controllers that can be connected: AW-RP655N, AW-RP555NFor details on connecting the pan-tilt heads and controller or connecting the pan-tilt heads and cameras, refer to the operating instructions of each dev...
Page 93 - Signal; Pan
93 5. System settings Example of connections (when the unit and a pan-tilt head are connected) Pan-tilt heads that can be connected: AW-HE100N, AW-PH400P, AW-PH405N, AW-PH360N Connections for AW-HE100N, AW-PH405N or AW-PH360N POWER 1 REF GPI SLOT2 2 SLOT 4 2 3 4 SLOT1 1 SLOT2 8 ～ IN SDI INPUTS TAL...
Page 94 - SET UP
94 5. System settings Connections for AW-PH400P POWER 1 REF GPI SLOT2 2 SLOT 4 2 3 4 SLOT1 1 SLOT2 8 ～ IN SDI INPUTS TALLY 6 6 INPUTS SIGNAL SDI OUTPUTS GND IN OUT 3 IN OUT 2 IN OUT 1 IN OUT OUTPUTS 1 5 7 SLOT OFF 2 SLOT1 5 SLOT SLOT PGM RS-422 LAN ON ANALOG INPUTS Y Pb Pr Y Pb Pr DVI INPUTS ANALO...
Page 95 - Camera control settings; For controlling the panning
95 5. System settings Camera control settings 1 Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to display the SYSTEM menu. 2 Turn [F1] to display the CamCTL1 sub menu. <Menu display> CamCTL1 Signal CTL Tally 3/16 IN1 1 Disable IN1-8 1-5 None Enable 3 Turn [F2] ...
Page 96 - Control is exercised at the fastest speed.; Middle: Control is exercised at the medium speed.
96 5. System settings 9 Turn [F4] to set the control (panning, tilting, lens focusing and lens zooming) speed using the Speed Item. Fast: Control is exercised at the fastest speed. Middle: Control is exercised at the medium speed. (This cannot be selected for the control of lens focusing or lens zoo...
Page 98 - -8-2. Displaying the version information and option information; MainVer Select Version; Soft: The software version information is displayed.; OptVer Select Board
98 5. System settings 5-8-2. Displaying the version information and option information Information on the unit’s software and hardware versions and the statuses of the options are displayed. 1 Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to display the SYSTEM menu. 2...
Page 99 - YES
99 5. System settings 5-9. Initialization Initialization returns the set data to the factory shipment status. (The network settings and the date and time settings are not initialized.) 1 Press the [FUNC] button to light its indicator, and then press the [SYSTEM] button to display the SYSTEM menu. 2 ...
Page 100 - External interfaces; Pin assignment; GVG protocol
100 6. External interfaces This unit comes with RS-422, GPI and tally connectors to serve as external interfaces. 6-1. RS-422 connector This enables the unit to be controlled by an external device.Use it with the settings below. (D-sub 9-pin, female, inch screw) Baud rate: 38400 bps Parity: ODD Stop...
Page 101 - COMMON
101 6. External interfaces 6-2. GPI connector These connectors enable the unit to be controlled from an external source.Signals are input using contacts. The following types of control are exercised using the contacts as triggers. Use stereo mini plugs with a 3.5 mm diameter for connection to the un...
Page 102 - Signal name; Pins 1 to 9 must satisfy the following conditions:; Example of tally connections
102 6. External interfaces 6-3. Tally connector The tally connector comes with tally output, output enable, power supply or fan alarm output pins. The output signals from the tally output pins are for lighting the tally lamps, and these outputs are open collector outputs.(D-sub 15-pin, male, inch sc...
Page 103 - Image transmission functions; Specifications; Pentium III, 1 GHz or better recommended; Connections; LAN crossover cable
103 7. Image transmission functions This unit comes with a function for transmitting still images from the host computer to the unit via LAN and a function for importing still images from the unit into the host computer. The image transmission software must be installed in the host computer from the...
Page 104 - How to install the software
104 7. Image transmission functions How to install the software This section describes how to install the image transmission software (HS400 Tool).Windows XP is used as the host computer’s operating system in the example given here. 1. Insert the CD-ROM supplied with the unit into the CD-ROM drive...
Page 105 - The main screen now appears.
105 7. Image transmission functions Operation This section describes how to operate the image transmission software (HS400 Tool). <Startup> On the Start menu of Windows, select [Programs] [Panasonic] [AV-HS400Tool] [HS400Tool]. The main screen now appears. <Exit> Click the [CLOSE...
Page 106 - FMEM1: Unit’s frame memory 1; 76) can be selected as
106 7. Image transmission functions <Transmitting images to the unit> 1. Select the mode. Check that “To HS400” appears in the [Mode] field. If “From HS400” appears instead, click the [From HS400] button so that “To HS400” appears. 2. Select the transmission destination of the images in the [T...
Page 107 - FMEM1: Images in unit’s frame memory 1
107 7. Image transmission functions <Transmitting images from the unit> 1. Select the mode. Check that “From HS400” appears in the [Mode] field. If “To HS400” appears instead, click the [To HS400] button so that “From HS400” appears. 2. Select the images to be imported to the host computer in ...
Page 108 - Setting menu table; A setting is entered when an item displayed (; Parameter 1
108 8. Setting menu table A setting is entered when an item displayed ( ↓ ) is selected and then the [F1], [F2], [F3], [F4] or [F5] switch is pressed.(It will not be entered unless the switch is pressed.) Menu Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4 Turn F1 to select. Turn F2 to sel...
Page 116 - Specifications and standard accessories
116 10. Specifications and standard accessories Specifications Inputs 8 video input lines (maximum) 4 standard video input lines: SDI inputs 4 Maximum of an additional 4 video input lines as options: SDI inputs 2, analog component (HD/SD) inputs 2, DVI inputs 2, analog composite inputs 2...
Page 118 - Standard accessories
118 Control I/O LAN (10BASE-T) 10 Mbps 1 (RJ-45) Serial communication interface RS-422 1 (D-sub 9-pin, female, inch screw) • Pan-tilt head system (pan-tilt head and camera) control supported • GVG standard protocol subset supported Tally output Open collector outputs (negative logic) 1 to 8 (D-s...
Page 119 - Defined below are the terms used in this manual.; Word; A parameter which is used to adjust the density of the key signals.
119 Appendix (glossary) Defined below are the terms used in this manual. Word Explanation AB Bus system A bus control mode. By executing a transition, the A bus and B bus signals are output to the program images alternately. Ancillary Data The auxiliary data other than the video signals which is tra...
Page 121 - The bus which always carries the program output signals.
121 Word Explanation PVW[Preview] The function for checking ahead of time the image which will be output after the next transition. The image is output from the PVW system. PGM[Program Bus] The bus which always carries the program output signals. PST[Preset Bus] The bus which carries the program out...
Page 122 - PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY; Panasonic Canada Inc.
F0908Y0 @ PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA Headquarters: 3 Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-5300 EASTERN ZONE: 3 Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7196 WESTERN ZONE: 3330 Cahuenga Blvd. West, Lo...
Panasonic RB F10
User Manual
Panasonic SC HTB200
User Manual
Panasonic CS Z25UFRAW CU Z25UBRA
Manual
Panasonic CS Z50UFRAW CU Z50UBRA
User Manual
Panasonic DMW BLK22
User Manual
Panasonic NI WL55
Manual
Panasonic DMP BD903
Manual
Panasonic NN ST23QM
Manual
Panasonic FV-1115VK3
User Manual
Panasonic EH NA0J
Manual
Panasonic FV 30BG3
Manual
Panasonic RE7 59
User Manual
Panasonic NE C1275
Manual
Panasonic RG T810LHA
User Manual
Panasonic CF SR
User Manual
Panasonic RZ B110W
User Manual