Panasonic AK-HRP931P - Manuals

Page 2 - Safety precautions; CAUTION; indicates safety information.; For CANADA

2 Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol,within an equilateral triangle, is...

Page 4 - Operating precautions; Handle the panel carefully.

4 Operating precautions ≥ The panel’s power is supplied from the camera control unit (AK-HCU931P). ≥ Handle the panel carefully. Dropping the panel or subjecting it to strong impact may cause malfunctioning and failures. ≥ Operate the panel within a temperature range of 32 °F to 104 °F (0 °C to 40 °...

Page 5 - Parts and their functions; Both BAR and TEST switch lamps off:; Camera video output; BAR switch lamp lighted:; Color bar signal output; TEST switch lamp lighted:; Test signal output; CLOSE switch lamp lighted:; This is used to automatically adjust the white balance.; ROP ON switch; This indicates whether the camera power is ON or OFF.; SD card slot; ROP operation panel; WHITE; AUTO

5 Parts and their functions Camera number indicator [CAMERA NO.] This indicates the camera number information. If the cameranumber is not indicated, “–” appears instead. 6 Camera video output selector switch[CLOSE/BAR/ TEST] This is used to select the camera video signals which are tobe output from ...

Page 6 - This is used to automatically adjust the black balance.; Auto setup methods; This indicates that the auto setup has started.; Flashing at 1 sec intervals:; OPT; Optical transmission alarm indicator [OPT ALARM]; This is the optical transmission warning indicator.; Vertical frequency status indicator [60Hz]; 0Hz operation is not supported at the present time.

6 Parts and their functions 2 Auto black balance switch [AUTO BLACK] This is used to automatically adjust the black balance. Lighted: This indicates that the automatic black balanceadjustment has started. Flashing: This indicates that the automatic black balanceadjustment ended without being complet...

Page 7 - This switch is not supported at the present time.; Adjustment item up and down shift switches [; HSAW

7 Parts and their functions 1 5600K switch [5600K MODE] This is used to change the amplification rate of the GBRsignals by an electrical circuit to achieve a white balancet h a t c o r r e s p o n d s t o t h e c o l o r t e m p e r a t u r e o f 5 6 0 0 K .When it is pressed, the B video signal is ...

Page 8 - This adjusts the master knee slope in the range of 0 to

8 Parts and their functions VPAR: Vertical parabola correction This is used to correct the coloring of black screen imagesin the vertical direction in the range of –100 to 100. Whenthe numerical setting is incremented, the video level at thetop and bottom of the screen is increased. 2 White shading ...

Page 9 - Gamma curve control switch [GAMMA CONTROL]; This is used to adjust the amount of vertical detail.; HDTL: Horizontal detail level; This is used to adjust the amount of horizontal detail.; CORNER: Corner detail

9 Parts and their functions 9 Flare control switch [FLARE CONTROL] This is selected to change the amount of flare correction.When it is selected, its lamp lights. RFLR GFLR BFLR 10 49 0 RFLR, GFLR, BFLR These adjust the R, G or B flare in the range of –100 to+100, and at 0 the flare correction opera...

Page 11 - This function applies the knee to the detail edge parts.; πππππ

11 Parts and their functions +CLP: Detail edge overshoot clip This is used to limit the length of the overshoot parts of thedetail edge components. –CLP: Detail edge undershoot clip This is used to limit the length of the undershoot parts ofthe detail edge components. KNEE: Detail edge knee This fun...

Page 12 - This indicates the software version of this unit.

12 Parts and their functions SCCO (SDTV): Subcarrier phase coarse adjustment This is used to coarsely adjust the phase of the subcarriersignal in relation to the SDTV genlock sync signal. SCFIN (SDTV): Subcarrier phase fine adjustment This is used to finely adjust the phase of the subcarriersignal i...

Page 13 - LCD display; J K; SCENE FILE

13 Parts and their functions LCD display This shows the adjustment items and adjustment valuesw h e n t h e c o n t r o l i t e m s e l e c t o r s w i t c h e s ? h a v e b e e n selected. @ Adjustment rotary encoders These enable the data of the adjustment items shown on theLCD display @ to be cha...

Page 14 - Scene file storage switch [SCENE FILE STORE]; Monitor selector switches; Monitor selector; GAIN; Gain selection status display [GAIN display]; SHUTTER

14 Parts and their functions Calling scene file data1. From among the 1 to 8 scene file switches, press thenumber of the switch that corresponds to the scene filewhich is to be called and light its lamp. 2. The scene file is now read. The data read from the scenefile is input into the current file a...

Page 15 - Iris joystick control range selector switch [FULL]; U T; Tally indicators; When in the auto iris mode:; Master pedestal level indicator

15 Parts and their functions R, G, B black controls [R, G, B FLARE] Whether these controls are to be used to adjust the flare orpedestal can be set on the menu. They are used for the red(R), green (G) and blue (B) black adjustments. When theauto black balance can be performed and the R, G or Bblack ...

Page 16 - ROP connector panel; RCP connector; Connections; Connections of the system components; Factory file; Storing reference files; User files

16 ROP connector panel RCP CCU PREVIEW X Y Z RCP connector The remote control panel (RCP) is connected here. Y CCU connector The camera control unit (CCU) is connected here. X Preview control connector [PREVIEW] This is the output connector which is used for previewing.When the joystick is pushed in...

Page 17 - Specifications; Tally control signals; Maximum cable extension distance:; Power consumption: 6 W

RCP CCU PREVIEW ROP ON CLOSE 5600K OFF FLARE GAMMA ON BLK OFF GAMMA KNEE ON AUTO OFF KNEE CLIP OFF WHITE CLIP WHITE ON MATRIX MATRIX OFF HD. DTL HD. DTL OFF SD. DTL SD. DTL BLACK WHITE R SHADING G B KNEE GAMMA BLK UNDO PED FLAME GAMMA GAIN SYSTEM FUNC BAR TEST CHARACTER RST OPT FAN 60Hz CABLE WHITE ...

Page 18 - PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY; Government Marketing Department:

F1002T @ Printed in JapanVQT0A41 PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southea...