Page 2 - Contents
– 2 – Contents Menu screen transitions . . . . . . . . . . . . . . 4Turning on the power . . . . . . . . . . . . . . . . 7HOME menu displays . . . . . . . . . . . . . . . 8 HOME menu . . . . . . . . . . . . . . . . . . . . . 13HOME SET UP menu . . . . . . . . . . . . . . 17 VIDEO IN menu . . . . . ....
Page 3 - TEST IC CARD MULTI CUE MONITOR
– 3 – Contents SET UP menu . . . . . . . . . . . . . . . . . . . 121INTERFACE SET UP menu . . . . . . . . 122PANEL SET UP menu . . . . . . . . . . . . . 128PANEL SET UP (OP MAP REMOTE) menu . . . . . . . . . . . . . . . . . . . . . . . . . 130 PANEL SET UP (OP MAP LOCAL) menu . . . . . . . . . . . ....
Page 4 - Menu screen transitions
– 4 – Menu screen transitions H O M E F 8 H O M E S E T U P A U D I O I N F 6 AU D I O I N P C M I N P U T S E L E C T AU D I O I N C U E I N P U T S E L E C T F 7 F 8 A U D I O I N S E T U P A U D I O O U T F 7 AU D I O O U T M O N I T O R V I D E O I N F 7 F 7 F 1 0 F 9 F 9 F 1 0 F 1 1 F 1 2 F 1 F...
Page 7 - Turning on the power; The HOME menu is displayed.
– 7 – Turning on the power Turn on the power. « The HOME menu is displayed. This VTR comes already programmed with menus that correspond to specific operating objectives, and theoperations performed on each differ from one menu to another. When a menu is selected using a menu se-lection button, what...
Page 8 - HOME menu displays; Audio signal display area; AUTO: This is always used for digital channel backup pur-; Display lamps; SYSTEM: This indicates the video system format which was set
– 8 – How to display the ≥ AUDIO IN menu: ≥ AUDIO IN PCM INPUT SELECT menu: menus: # ≥ AUDIO OUT menu: ≥ AUDIO IN CUE INPUT SELECT menu: # F7 AUDIO OUT AUDIO OUT F6 AUDIO IN AUDIO IN HOME menu displays ∑ Audio signal display area (Either 8 or 4 channels will be automatically displayed depending on t...
Page 9 - REF: This indicates the status of the output reference signal
– 9 – HOME menu displays REF: This indicates the status of the output reference signal which has been selected by the VTR. HD REF59: HD REF with a field frequency of 59.94 Hz is selected. HD REF47: HD REF with a field frequency of 47.96 Hz is selected. HD REF48: HD REF with a field frequency of 48.0...
Page 10 - Setting mode display area; TRACK VAR: Appears when an adjustment has been made with; Remaining tape time
– 10 – HOME menu displays ∑ Setting mode display area The displays appearing in this area indicate the modes whichhave been set.CUT: Appears when the audio cut editing mode is set. XFADE: Appears when the audio cross-fade editing modeis set. VFADE: Appears when the audio V fade editing mode isset. I...
Page 11 - Setting the initial value for the time code; The display now appears in reverse video.
– 11 – HOME menu displays ∑ Setting the initial value for the time code (1) Press the center cursor key. The display now appears in reverse video. (2) Press the center cursor key again so that the cursor is made to serve as a column cursor, and then use the number key to input the value. To set a le...
Page 12 - Setting and checking the cue time; The time code display now appears in reverse video.
– 12 – HOME menu displays ∑ Setting and checking the cue time (1) Press the center cursor key. The time code display now appears in reverse video. (2) Press the [ 4 ] cursor key. The cue time now appears in reverse video. (3) Press the center cursor key again so that the cursor is made to serve as a...
Page 13 - HOME menu; This menu is displayed by pressing the following key:
– 13 – HOME menu This menu is displayed by pressing the following key: HOME [4] : Cassette tape in the 4-channel audio format. [8] : Cassette tape in the 8-channel audio format. (This display indicates the C bit pin position of thecassette tape.)If system format does not matched with the C bit pinpo...
Page 15 - Key; SET UP; Description; Transfers the VTR to the HOME SET UP menu screen.
– 15 – HOME menu Key F8 F9 – F10 F11 F12 F13 Key designation SET UP —— PREAD A ° For setting audio pre-readto ON or OFF (SD mode only) PREAD V ° For setting video pre-readto ON or OFF (SD mode only). REC INHFor setting the recordinhibit mode. Description Transfers the VTR to the HOME SET UP menu scr...
Page 17 - HOME SET UP menu; This menu is displayed by pressing the following keys:
– 17 – HOME SET UP menu This menu is displayed by pressing the following keys: ) OR ) F1 SET UP F8 HOME F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 20 - Reference; OUT REF: This sets the video output signal reference.
– 20 – HOME SET UP menu ∑ Reference OUT REF: This sets the video output signal reference. AUTO: When the REF VIDEO connector input sig-nal is available, the output reference islocked to REF VIDEO; when it is not avail-able, it is locked to the INPUT input signal.When neither the REF VIDEO nor INPUTi...
Page 21 - Programmed play function
– 21 – HOME SET UP menu ∑ Programmed play function (1) Press the F4 (PRG PLY) key. (2) Set the step to FINE or COARSE using the F3 (PRG PLY) key. (3) Set the programmed play speed using the ADJUST control. (4) Press the PLAY and VAR buttons together. (5) To change the playback speed, turn the ADJUST...
Page 22 - VIDEO IN menu
– 22 – VIDEO IN menu This menu is displayed by pressing the following key: VIDEO IN F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 24 - VIDEO OUT HD menu
– 24 – VIDEO OUT HD menu This menu is displayed by pressing the following key: VIDEO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 26 - VIDEO OUT HD SET UP menu
– 26 – VIDEO OUT HD SET UP menu This menu is displayed by pressing the following keys: > F8 VIDEO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 28 - VIDEO OUT HD SET UP STATE menu
– 28 – VIDEO OUT HD SET UP STATE menu This menu is displayed by pressing the following keys: (or ) > > OR > > (or ) > F12 F12 F11 F9 VIDEO OUT F12 F8 AUDIO OUT VIDEO OUT Description NORMAL: The standard mode is established (E-E throughmode is turned OFF). THROUGH: When the EE/EE1 is s...
Page 29 - Selecting the TAPE/EE output signals; (2) Move the cursor to the desired position using the cursor keys.
– 29 – VIDEO OUT HD SET UP STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR’s operation are switched onthis menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position...
Page 30 - VIDEO OUT SD menu
– 30 – VIDEO OUT SD menu This menu is displayed by pressing the following keys: > F9 VIDEO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 32 - VIDEO OUT SD SET UP COMPOSITE menu
– 32 – VIDEO OUT SD SET UP COMPOSITE menu This menu is displayed by pressing the following keys: > > F11 F9 VIDEO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 B.CLIP OFF
Page 34 - VIDEO OUT SD SET UP CMPST STATE menu; EXIT
– 34 – VIDEO OUT SD SET UP CMPST STATE menu This menu is displayed by pressing the following keys: (or [AUDIO OUT]) > > OR > > (or ) > F12 F12 F11 F9 VIDEO OUT F12 F8 VIDEO OUT Description NORMAL: The standard mode is established (E-E throughmode is turned OFF). THROUGH: The E-E throu...
Page 36 - VIDEO OUT SD SET UP SDI menu
– 36 – VIDEO OUT SD SET UP SDI menu This menu is displayed by pressing the following keys: ) ) F12 F9 VIDEO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 B.CLIP OFF
Page 38 - VIDEO OUT SET UP LINE BLK (video output line blanking) menu
– 38 – VIDEO OUT SET UP LINE BLK (video output line blanking) menu This menu is displayed by pressing the following keys: ) ) (or ) ) . F11 F12 F11 F9 VIDEO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 – F7 F8 F9 F10 F11 F12 – F13 Key designation —— EXIT ALL ON ALL OFF LINE BLK —— Descripti...
Page 39 - Setting the line blanking; The cursor now appears.
– 39 – VIDEO OUT SET UP LINE BLK (video output line blanking) menu ∑ Setting the line blanking The blanking lines in the vertical blanking period can be set in 1-line increments. (1) Press the center cursor key. The cursor now appears. (2) Move the cursor and select the lines to be blanked. (3) Pres...
Page 40 - VIDEO OUT SD SET UP SDI STATE menu
– 40 – VIDEO OUT SD SET UP SDI STATE menu This menu is displayed by pressing the following keys: (or ) ) ) OR ) ) (or ) ) . F12 F12 F11 F9 VIDEO OUT F12 F8 AUDIO OUT VIDEO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 – F7 F8 F9 – F13 Key designation —— EE_MODE —— EXIT —— Description N...
Page 41 - VIDEO OUT SET UP STATE menu
– 41 – VIDEO OUT SET UP STATE menu ∑ Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR’s operation are switched onthis menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position us...
Page 42 - VIDEO OUT CONVERT menu; HD; Returns the VTR to the VIDEO OUT HD menu screen.
– 42 – VIDEO OUT CONVERT menu This menu is displayed by pressing the following keys: ) F10 VIDEO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 – F6 F7 F8 F9 F10 – F13 Key designation HD_TO_SD SD_TO_HD HD_TO_HD —— HD —— SD —— Description Transfers the VTR to the VIDEO OUT CONVERT HD ...
Page 47 - RESPONSE; Returns the VTR to the VIDEO OUT CONVERT menu screen.
– 47 – – 47 – VIDEO OUT CONVERT HD_TO_HD menu This menu is displayed by pressing the following keys: ) ) ° This menu is operational when 1080/23.98p, 1080/24p or 1080/25p has been set as the system format. F3 F10 VIDEO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 – F7 F8 F9 – F13 K...
Page 48 - AUDIO IN menu
– 48 – AUDIO IN menu This menu is displayed by pressing the following key: AUDIO IN F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 The digital audio input statuses are displayed here.PRE EMPHASIS ON: Pre-emphasis is applied to the input signals. OFF: Regular signals with no pre-emphasis are supplied.
Page 50 - AUDIO IN PCM INPUT SELECT menu
– 50 – AUDIO IN PCM INPUT SELECT menu This menu is displayed by pressing the following keys: > F6 AUDIO IN F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 52 - Selects the internal generator signals.
– 52 – AUDIO IN PCM INPUT SELECT menu Key F10 F11 F12 F13 Key designation CH-6For selecting the recordingsignals of digital audioCH6. DIGITALFor selecting the CH7 andCH8 digital input signals. CH-7For selecting the recordingsignals of digital audioCH7. CH-8For selecting the recordingsignals of digit...
Page 53 - AUDIO IN CUE INPUT SELECT menu
– 53 – AUDIO IN CUE INPUT SELECT menu This menu is displayed by pressing the following keys: > The below screen will be appeared when the menu is in the D-MIX status by pressing the F9 (D-MIX) key. F7 AUDIO IN F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 54 - AUTO: In the normal recording mode, mixes and records all the; Mixes the playback signals.
– 54 – AUDIO IN CUE INPUT SELECT menu Key F1 F2 F3 F4 F5 – F7 F8 F9 F10 F11 F12 F13 Key designation CH-1For setting cue mixing forCH1.CH-2For setting cue mixing forCH2.CH-3For setting cue mixing forCH3.CH-4For setting cue mixing forCH4. —— EXIT CUEFor selecting the cueaudio recording signals. CH-5Fo...
Page 55 - AUDIO IN SET UP menu
– 55 – AUDIO IN SET UP menu This menu is displayed by pressing the following keys: > OR > F6 SET UP F8 AUDIO IN F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 56 - Switching the audio level meter scale
– 56 – AUDIO IN SET UP menu Key F1 F2 – F5 F6 F7 F8 F9 F10 F11 F12 – F13 Key designation INT SG MD —— PEAK HOLDFor setting the peak hold. SCALEFor switching the levelmeter scale. EXIT DATA ADV ° 1 STYLE ° 1 For setting the digitalaudio input/output dataformat. RATE CON ° 3 —— Description For selecti...
Page 57 - Operation; The video input and AES input must be synchronized.
– 57 – AUDIO IN SET UP menu F11 (RATE CON) key ∑ Operation ≥ The menu item is set to ON or OFF for both the recording and playback systems simultane-ously: it is not possible to select the item’s setting for recording or playback only. ≥ Similarly, the menu item is set to ON or OFF for all channels ...
Page 58 - AUDIO IN CH-MIX SELECT menu; SELECT; signals cannot be mixed.
– 58 – AUDIO IN CH-MIX SELECT menu This menu is displayed by pressing the following keys: > F9 AUDIO IN F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 – F5 F6 F7 F8 F9 – F13 Key designation SELECT —— CH-MIX (ON)For mixing the inputsignals with the signalsplayed backsimultaneously andrecordi...
Page 59 - The mixing graph display now appears.
– 59 – AUDIO IN CH-MIX SELECT menu ∑ Mix-and-record (1) Press the F6 (CH-MIX) key to set it ON. The mixing graph display now appears. (2) Press the center cursor key to display the cursor. (3) Use the cursor keys to move the cursor to the channel in which the sound is to be mixed. (4) Press the cent...
Page 60 - Notes
– 60 – AUDIO IN CH-MIX SELECT menu ∑ Mix-and-record (continued) (5) Move the cursor to the mixing ratio display area, and turn the ADJUST control to set the ratio at which the signals are to be mixed (in 1% increments). Mixing ratio display area O Notes N ≥ When the PLAY button is pressed after the ...
Page 61 - AUDIO OUT menu
– 61 – AUDIO OUT menu This menu is displayed by pressing the following key: AUDIO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 The digital audio input statuses are displayed here.PRE EMPHASIS ON: Pre-emphasis is applied to the input signals. OFF: Regular signals with no pre-emphasis are supplied.
Page 63 - AUDIO OUT MONITOR menu
– 63 – AUDIO OUT MONITOR menu This menu is displayed by pressing the following keys: > F7 AUDIO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 65 - AUDIO OUT SET UP menu
– 65 – AUDIO OUT SET UP menu This menu is displayed by pressing the following keys: > OR > F7 SET UP F8 AUDIO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 67 - STYLE; The style is set to the normal PCM audio mode.; OFF: The sound is not output to channels 5 through 8.
– 67 – AUDIO OUT SET UP menu Key F10 F11 F12 F13 Key designation STYLE ° 1 RATE CON ° 2 STATE AUTO CPY ° 3 Description This menu item can be set by pressing the F10 key together withthe F key.PCM: The style is set to the normal PCM audio mode. DATA: The style is set to the data mode (compressed audi...
Page 69 - When the key is pressed again, the mode reverts to VAR.; Fade function
– 69 – AUDIO OUT SET UP menu ∑ Adjusting the audio output signals in relation to the video signals (1) Press the F1 (A/V PHASE) key to put the display in reverse video. (2) Adjust the phase difference using the ADJUST control. When the ADJUST control is turned, the display changes to VAR.(The adjust...
Page 70 - AUDIO OUT SET UP STATE menu; Transfers the VTR to the AUDIO OUT SET UP menu screen.
– 70 – AUDIO OUT SET UP STATE menu This menu is displayed by pressing the following keys: > > F12 F8 AUDIO OUT Description NORMAL: The standard mode is established (E-E throughmode is turned OFF). THROUGH: The E-E through mode (AV minimum delay mode) is established. ° A discrepancy occurs betw...
Page 72 - AUDIO OUT SDI ASIGN menu
– 72 – AUDIO OUT SDI ASIGN menu This menu is displayed by pressing the following keys: > F9 AUDIO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 SD_AUD 24bit
Page 77 - Changing the superimposing position; Time code displays and VTR’s operating modes; Value generated by time code generator
– 77 – TC/CHR menu ∑ Changing the superimposing position (1) Move the position using the cursor keys. ≥ When a cursor key is held down, the cursor will move morequickly. ≥ When the center cursor key is pressed, the superimposing re-turns to its initial position. Center cursor key Cursor keys ∑ Time ...
Page 79 - L CR
– 79 – TC/CHR menu ∑ Superimposed displays When TC.TC is selected as the SUPER setting, the time code appears as a 2-level display. (The HDSUPER and SD SUPER are linked.) The converted time code is displayed on the top level of the superim-posed display. On the bottom level, the display can be switc...
Page 80 - Table of user bit settings
– 80 – TC/CHR menu Table of user bit settings F1 (SOURCE) INT (internal) TC S LTCS VITC EXT LTC EXT LTC F2 (TC SLAVE) —— —— SLAVE DIRECT F3 (UB SLAVE) ON OFF ON OFF ON OFF F10 (TCR) LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUDIO VITC LUBG mode REGEN INT UB PRESET INT...
Page 82 - TCG OUT; Returns the VTR to the TC/CHR menu screen.; HD mode: The DOWN CON SD output VITC superimposing; and the lines in which it is superimposed are set.
– 82 – TC/CHR SET UP menu Key F1 – F6 F7 F8 F9 F10 F11 F12 F13 Key designation TCG OUT EXIT VITC.L VITCFor superimposing VITConto the SD output. —— VITCFor selecting the VITC. LTCFor selecting the LTC. Description For selecting whether to latch the TCG display and LTC outputusing the INPUT CHECK key...
Page 84 - Selecting the line where VITC is to be inserted; Use the cursor keys (
– 84 – TC/CHR SET UP VITC.L menu ∑ Selecting the line where VITC is to be inserted 1. Use the cursor keys ( 2 , 1 ) to select the lines where VITC is to be inserted. The line numbers shown in the boxes on the screen indicate the recommended insertionlines (lines 14 and 16 for NTSC and lines 11 and 1...
Page 87 - Concerning the TC SYNC value and sync phase settings
– 87 – TC/CHR CONVERT menu Key F12 F13 Key designation HD SUPER LTC OUT ° Description For selecting the time code which is to be output to the HDmonitor connector.24TC: The original time code with the frame count of 24 isoutput. 30TC: The post-conversion time code with the frame count of30 is output...
Page 88 - Editing accuracy
– 88 – Audio insert editing function with 23.98 Hz VTR system and 30 Hzexternal operating environments As shown in the above diagram of the system connections, this function enables audio insert editing on the23.98P tape of the model HD3700B even in an environment with a 30 Hz external device, and b...
Page 89 - Points to note
– 89 – Audio insert editing function with 23.98 Hz VTR system and 30 Hzexternal operating environments O Points to note N The function will not work unless the following conditions are met.(a) The system frequency of the VTR must be set to 23.98 Hz.(b) The black burst reference signal must be connec...
Page 91 - MULTI CUE menu
– 91 – MULTI CUE menu This menu is displayed by pressing the following key: MULTI CUE F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 92 - points on this page can be registered, changed or cleared.
MULTI CUE menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 Key designation 1For designating the cuenumber 1 and page.2For designating the cuenumber 2 and page.3For designating the cuenumber 3 and page.4For designating the cuenumber 4 and page.5For designating the cuenumber 5 and page. PROTECTFor ...
Page 93 - Switching the pages
– 93 – MULTI CUE menu ∑ Switching the pages ≥ A particular page can be selected by pressing one of the F1 (1) through F5 (5) or F9 (6) throughF13 (10) keys together with the F key. ≥ The pages are scrolled up when the F key and “ 1 ” key are pressed together. ≥ The pages are scrolled down when the F...
Page 94 - Changing cue points
MULTI CUE menu 4. Move the cursor to the section where the captured time code is to be displayed. 5. Press the COPY key to call the captured time code. 5. The cue data is now entered. ≥ The position of the next cue number automatically appears in reverse video when the F1(AUTO STEP) key on the MULTI...
Page 95 - MULTI CUE SET UP menu
– 95 – MULTI CUE SET UP menu This menu is displayed by pressing the following keys: ) F8 MULTI CUE F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 97 - INSERT/ASSEMBLE MANUAL EDIT menu
– 97 – INSERT/ASSEMBLE MANUAL EDIT menu Press the (or ) > keys to display the MANUAL EDIT menu. F12 INSERT ASSEM F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 – F7 F8 F9 F10 – F11 F12 F13 Key designation —— SET UP INSERT/ASSEMBLEFor setting the editingmode ON/OFF. —— AUTO EDIT CH SELECTFor se...
Page 98 - INSERT MANUAL EDIT CH SELECT menu
– 98 – INSERT MANUAL EDIT CH SELECT menu This menu is displayed by pressing the following keys: > > F13 F12 INSERT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 ° CH-5 to CH-8 are not displayed when PCM audio has been set to the 4-channel format.
Page 100 - INSERT/ASSEMBLE MANUAL EDIT SET UP menu; Press the
– 100 – INSERT/ASSEMBLE MANUAL EDIT SET UP menu Press the (or ) > keys to change to the MANUAL EDIT menu, then press the key to display this menu.ORPress the > keys to display this menu. F2 SET UP F8 F12 INSERT ASSEM F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 101 - TIMING
– 101 – INSERT/ASSEMBLE MANUAL EDIT SET UP menu Key F1 F2–F7 F8 F9 F10 Key designation TIMING ° For setting the edit timing. —— EXIT ERR.STPError stop. TRACKINGFor adjusting the tracking. Description Sets the timing with which to record the fields at the edit IN pointand OUT point. This menu item ca...
Page 102 - FD TIME
– 102 – INSERT/ASSEMBLE MANUAL EDIT SET UP menu Key F11 F12 F13 Key designation CAP LOCKFor setting the capstanservo lock. FD TIME ° For setting the audio fadetime. MODE ° For setting the audio fadeedit. Description For selecting the capstan servo lock mode during playback.4F AUTO (8F AUTO: 1080/23p...
Page 103 - EDIT REC INHIBIT mode display; SOFTWARE; Sequence of priority for recording inhibit modes
– 103 – INSERT/ASSEMBLE MANUAL EDIT SET UP menu ∑ EDIT REC INHIBIT mode display This display shows the statuses of the editing inhibit modes. ≥ SOFTWARE ≥ The editing inhibit modes selected for each channel are shownhere. Refer to “Selecting the SOFTWARE inhibit channels.” ≥ VIDEO: Video channel edi...
Page 104 - Selecting the SOFTWARE inhibit channels; REC ENV display
– 104 – INSERT/ASSEMBLE MANUAL EDIT SET UP menu ∑ Selecting the SOFTWARE inhibit channels (1) Press the center cursor key. The cursor now appears. (2) Press the cursor key to move the cursor to the channel where editing is to be inhibited. (3) Press the center cursor key. Once the display appears in...
Page 105 - Tracking; Automatically adjusting the tracking (optimizing)
– 105 – INSERT/ASSEMBLE MANUAL EDIT SET UP menu ∑ Tracking ≥ Automatically adjusting the tracking (optimizing) To optimize the tracking automatically, press the F10 (TRACKING) key to select OPT ONCE orOPT AUTO.Set the preroll time to 5 seconds or more. ≥ At the OPT ONCE setting, the tracking is opti...
Page 106 - Manually adjusting the tracking
– 106 – INSERT/ASSEMBLE MANUAL EDIT SET UP menu (3) The following message appears and optimizing is suspended in the following cases: ≥ When the VTR is set to a mode other than PLAY while optimizing is underway. ≥ When optimizing has failed. ≥ When no video signals have been recorded on the tape. ≥ ...
Page 107 - Selecting the audio fade time
– 107 – INSERT/ASSEMBLE MANUAL EDIT SET UP menu ∑ Selecting the audio fade time (1) Press the F13 (MODE) key to set it to X FADE or V FADE. (2) Press the F12 (FD TIME) key. (3) Turn the ADJUST control to select the audio fade time. O Note N The V fade time is a multiple of the time set for FD TIME.I...
Page 108 - INSERT/ASSEMBLE AUTO EDIT menu; The AUTO EDIT menu is displayed by pressing the following keys:
– 108 – INSERT/ASSEMBLE AUTO EDIT menu The AUTO EDIT menu is displayed by pressing the following keys: or # F12 INSERT ASSEM F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 110 - Tape position indicator
– 110 – INSERT/ASSEMBLE AUTO EDIT menu ∑ Tape position indicator This indicates the edit points (IN and OUT) and tape positions of the recorder and player. ≥ EOT (end of tape) or BOT (beginning of tape) is displayed whenthe tape is at its end or beginning. ≥ During split editing, the audio and video...
Page 111 - Trimming operations
– 111 – INSERT/ASSEMBLE AUTO EDIT menu (2) Search the edit point using the search dial. 1) Search the edit point using the search dial.2) Press the ENTRY button. ≥ Trimming operations (1) Press the center cursor key. The cursor now appears. (2) Press the cursor key to move the cursor to the section ...
Page 112 - Input the data using the scratchpad.
– 112 – INSERT/ASSEMBLE AUTO EDIT menu Input the data using the scratchpad. 1) Press the center cursor key. The cursor now appears. 2) Press the cursor key to move the cursor to the time code IN or OUT position which is to be input. 3) Press the FROM key. The time code at the cursor position is disp...
Page 113 - Variable memory function
– 113 – INSERT/ASSEMBLE AUTO EDIT menu ∑ Variable memory function 1. Set the F3 (W/PLYR) key to OFF. W/PLYR 2. Set the F4 (VAR MEMO) key to ON. VAR MEMO ≥ If the IN and OUT points have already been entered, they are automatically cleared. ≥ If ON is set for the split mode, it is forcibly set to OFF....
Page 114 - Variable memory editing; VAR MEMO
– 114 – INSERT/ASSEMBLE AUTO EDIT menu ∑ Variable memory editing By operating the search dial on a VTR connected to the unit’s RS-422A REMOTE OUT connector or REMOTEIN/OUT connector, the playback speed and direction can be stored in that VTR’s memory, and the memorydata can be reproduced during auto...
Page 115 - INSERT AUTO EDIT CH SELECT menu
– 115 – INSERT AUTO EDIT CH SELECT menu This menu is displayed by pressing the following keys: # # F13 F12 INSERT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 117 - INSERT/ASSEMBLE AUTO EDIT SET UP menu
– 117 – INSERT/ASSEMBLE AUTO EDIT SET UP menu This menu is displayed by pressing the following keys: (or ) to change to the AUTO EDIT menu, then press the key OR ) F2 SET UP F8 INSERT ASSEM F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 118 - in
– 118 – INSERT/ASSEMBLE AUTO EDIT SET UP menu Key F1 F2 F3 F4 F5 F6 F7 Key designation TIMING ° 1 For setting the edit timing. V PREVVideo preview. A PREVAudio preview. PLR SYNCPlayer synchronization. PREROLLFor setting the preroll time. POSTROLLFor setting the postroll time. REACTIONFor compensatin...
Page 120 - Selecting the preroll time; Any time up to 30 seconds can be set.; Setting DLY START; ” or “; Setting EDIT REC INHIBIT
– 120 – INSERT/ASSEMBLE AUTO EDIT SET UP menu ∑ Selecting the preroll time (1) Press the F5 (PREROLL) key. (2) Set the preroll time using the ADJUST control. Any time up to 30 seconds can be set. (3) Press the F5 key. ≥ If this setting is at variance from the preroll time set on the HOME SET UP menu...
Page 121 - SET UP menu
– 121 – SET UP menu This menu is displayed by pressing the following key: SET UP F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 F5 F6 F7 F8 – F9 F10 F11 F12 F13 Key designation HOME MAN EDIT AUTO EDIT SYSTEM TC/CHR AUDIO IN AUDIO OUT —— INTERFACE PANEL USER ENGINEER ° Description Transfe...
Page 122 - INTERFACE SET UP menu
– 122 – INTERFACE SET UP menu This menu is displayed by pressing the following keys: ) F10 SET UP F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 123 - Enables parameter settings and control.
– 123 – INTERFACE SET UP menu Key F1 F2 F3 F4 F5 F6 Key designation P-2RS-422A Control modesetting. RS-232C PARA50P parallel remoteON/OFF. AV CONT.V/A control. FF/REW MAX SPFF/REW maximum speedsetting. DEV. IDDevice type. Description When the component connected to the RS-422A REMOTEconnector is to ...
Page 125 - Table of correlations between modes and connectors; MODE-1 connection diagram
– 125 – INTERFACE SET UP menu ∑ Table of correlations between modes and connectors MODE-1 connection diagram MODE-2 connection diagram MODE MODE-1 MODE-1 MODE-2 MODE-3 MODE-3 MODE-4 IN Controller Controller Controller Disabled Disabled Disabled OUT Player 1 Player 1 Player 1 Player 1 Player 1 Player...
Page 126 - Setting the RS-232C parameters; The parameter display now appears.; Setting the V/A control parameters; The AV control parameter is fixed at the baud rate of 1200 bps.
– 126 – INTERFACE SET UP menu ∑ Setting the RS-232C parameters (1) Press the F2 (RS-232C) key to set it ON. The parameter display now appears. BAUD RATE: 300, 600, 1200, 2400, 4800, 9600 bps DATA LENGTH: 7 or 8 bitsSTART BIT: 1 bit, fixed STOP BIT: 2 or 1 bit PARITY: None, odd or even (2) Press the ...
Page 127 - Setting the CH ASSIGN audio channel; The input area now blinks.
– 127 – INTERFACE SET UP menu ∑ Setting the CH ASSIGN audio channel The commands from a controller which has only analog audio CH1 and CH2 preset commands can be re-read and allotted to the digital audio CH1 to CH4 (or CH1 to CH8 with an 8-channel format) and CUEchannels. (1) Press the center cursor...
Page 128 - PANEL SET UP menu
– 128 – PANEL SET UP menu This menu is displayed by pressing the following keys: # F11 SET UP F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 131 - All the keys can be operated by remote control.; SELECT: The selected keys can be operated by remote control.; Returns the VTR to the SET UP menu screen.
– 131 – PANEL SET UP (OP MAP REMOTE) menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 – F12 F13 Key designation VIDEOFor adjusting the videolevel. AUDIOFor adjusting the audiolevel. TRACKINGFor selecting the trackingadjustment. MON SELFor selecting the monitor. MAP MODEFor enabling keyoperations. FUNCTIONFor ena...
Page 132 - OP MAP setting method
– 132 – PANEL SET UP (OP MAP REMOTE) menu ∑ Correlation between F5 (MAP MODE) and F6 (FUNCTION) keys O Notes N ≥ Even when the F6 key has been set to ENABLE on this menu, its setting will be changed toDISABLE if the unit is in the remote control mode and it receives the LOCAL DISABLE com-mand. ≥ (Th...
Page 135 - USER SET UP menu
– 135 – ° The items set using F1 to F7 on the SYSTEM SET UP menu (on pages141 and 143) are not rewritten even if the factory files are loaded. USER SET UP menu This menu is displayed by pressing the following keys: # F12 SET UP Key F1 F2 F3 F4 F5 F6 – F7 F8 F9 F10 F11–F13 Key designation LOADFor loa...
Page 136 - Saving user files; Inputting the filename; BCDEFGHIJ
– 136 – USER SET UP menu ∑ Saving user files Twelve files are provided in this unit.Two of these files are reserved: the LAST file containing the statuses established when the power was lastturned off, and the FACTORY file containing the factory statuses (initial settings). These two files cannot be...
Page 137 - Locking user files; When files are to be unlocked:; Updating user files
– 137 – USER SET UP menu ∑ Locking user files When locked, the files are protected from subsequent attempts to delete or update their data. (1) Press the cursor keys to select the file to be locked. 1. EDITOR 1 (2) Input the password for files 1 to 4. For files 5 to 10, press the F key and F9 key to...
Page 138 - Deleting user files
– 138 – USER SET UP menu ∑ Deleting user files Unnecessary files can be deleted. (1) Press the cursor keys to select the file to be deleted. 5. EDITOR 2 (File locked) (2) Check that the file to be deleted is unlocked. If it is locked, refer to the section on locking the user files, and unlock the fi...
Page 139 - Copying user filenames; When a file is to be given the same name, the filename is copied.
– 139 – USER SET UP menu ∑ Copying user filenames When a file is to be given the same name, the filename is copied. (1) Press the cursor keys to select the filename to be copied. 1. EDITOR 1 (2) Press the FROM key. 1. EDITOR 1 (3) Press the cursor keys to select the number of file serving as the cop...
Page 140 - SYSTEM SET UP menu
– 140 – SYSTEM SET UP menu This menu is displayed by pressing the following keys: ) The system format and video output format currently set in the menu are displayed. F4 SET UP F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 141 - FREQ; The 24 Hz system is selected.
– 141 – SYSTEM SET UP menu Refer to the setting flowchart and output status tables on pages 144 and 145.) As indicated in the procedures below, select the system frequency, video recording format, audio recordingformat, and output formats for the output connectors to set the system format. Key F1 F2...
Page 142 - HD SDI
– 142 – Key F4 F5 F6 Key designation AUDIOFor selecting the audiorecording format. HD SDI HD MONI Description For selecting the audio recording format.When the F4 key is pressed, the audio recording formatselection window is opened. The format can now be selectedusing the cursor keys (but only when ...
Page 143 - SD SDI; OFF: The tape is played back in the mode set using the
– 143 – Key F7 F8 F9 F10 F11 F12–F13 Key designation SD SDI EXIT A.REC.GRD —— PB AUTO —— Description For selecting the format in which the signals are to be output toSD SDI MAIN.When the F7 key is pressed, the HD SDI MAIN output selectionwindow is opened. The output format can now be selected usingt...
Page 145 - System format and video output status table
– 145 – SYSTEM SET UP menu System format and video output status table FREQ 59.94 23.98 24 50 25 Optional board AJ-UDC3700AG YES VIDEO 1080i 720p 525i 1080psf 1080p 1080psf 1080p 1080i 625i 1080psf 1080p AUDIO 4ch (20bit) 8ch (24bit) 4ch (20bit) 8ch (24bit) 4ch (20bit) 8ch (24bit) (8ch (24bit)) (8ch...
Page 146 - ENGINEER SET UP menu
– 146 – ENGINEER SET UP menu This menu is displayed when the > and keys are pressed together, and then press the key again. F F13 SET UP F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 – F7 F8 F9 F10 – F13 Key designation —— RF —— EXIT OPERATION —— Description Transfers the VTR to the RF ...
Page 147 - RF ENGINEER SET UP menu; This menu is displayed when the
– 147 – RF ENGINEER SET UP menu This menu is displayed when the > and keys are pressed together and then the key followed by the key are pressed. F2 F13 F F13 SET UP F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 149 - OPERATION ENGINEER SET UP menu
– 149 – OPERATION ENGINEER SET UP menu This menu is displayed when the > and keys are pressed together and then the key is pressed. F9 F F13 SET UP F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 151 - TEST menu
– 151 – TEST menu This menu is displayed when the key is pressed. TEST F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 UDC BOARD INSTALLED Key F1 F2 F3 F4 F5 F6 F7 F8 – F12 F13 Key designation —— RF AUDIO MECHA SYSTEM FRONT SERVO —— IC CARD Description Transfers the VTR to the RF TEST menu screen. Transf...
Page 152 - OPERATION TIME display; UDC BOARD INSTALLED
– 152 – TEST menu ∑ OPERATION TIME display How long the VTR has been used for appears on this display. OPERATION: Total power-on time HEAD ROTATION: Cumulative head drum rotation timeTAPE TRAVEL: Cumulative tape travel time THREADING: Total number of loading/unloading repeti-tions POWER ON: Number o...
Page 153 - RF TEST menu
– 153 – RF TEST menu This menu is displayed by pressing the following keys: > F2 TEST F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 154 - MODE; Displays envelop level.
– 154 – RF TEST menu Key F1 F2 F3 F4 F5 F6 F7 F8 F9 – F10 F11 F12 F13 Key designation EECC SMPLChange of error ratemeasurement time. METERSwitch of meter display. —— LOADLoad of default value. —— MODE CH EXIT —— ADJ RFRF adjustment valuedisplay. —— HEAD CLNManual head cleaning. Description FAST: Mea...
Page 155 - Error rate display; Press the center cursor key to display the cursor.; Correction and revision statuses
– 155 – RF TEST menu ∑ Error rate display The error rates (error occurrence rates) are indicated on the 1) TOTAL ERROR and 2) INNER ERROR displays. 1) TOTAL ERROR During recording, the error rate of the simultaneous playbacksignals is displayed. During playback, the error rate of the play-back signa...
Page 156 - RF adjustment value display menu
– 156 – RF adjustment value display menu F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1–F5 F6 F7 F8–F10 F11 F12 Key designation —— ADJ MODEAdjust mode. ADJ CH —— ADJ RFRF adjustment valuedisplay. ADJ SEL Description FIX: Holds the current adjusted value. Parameter can be readjusted by remote adju...
Page 157 - AUDIO TEST menu
– 157 – AUDIO TEST menu This menu is displayed by pressing the following keys: > F3 TEST F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 Key designation CH-1 CH-2 CH-3 CH-4 CUE MONI.L MONI.R EXIT REF.LEV IMPED. —— OUT LEV. IN LEV. Description Sets the CH1...
Page 158 - MECHA TEST menu; The menu below is displayed when the
– 158 – MECHA TEST menu This menu is displayed by pressing the following keys: > F4 TEST F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 The menu below is displayed when the key is pressed. F5
Page 159 - Returns the VTR to the TEST menu screen.; MECHA TEST men
– 159 – Key F1 F2 F3 F4 F5 F6 – F7 F8 F9 – F13 Key designation MODELoading without tape. —— C.SIZECassette size selection. —— SENSORSensor operation check. —— EXIT —— Description NORMAL: Normal operation.NO-TAPE: Loading without cassette tape is possible. Loading starts when the STOP button is press...
Page 160 - SYSTEM TEST menu
– 160 – SYSTEM TEST menu This menu is displayed by pressing the following keys: # . This menu contains keys for adjustments by service personnel. General users cannot operate these keys.Press F8 key to return to TEST menu. F5 TEST Key F1 – F7 F8 F9 – F13 Key designation —— EXIT —— Description Return...
Page 161 - SERVO TEST menu
– 161 – SERVO TEST menu This menu is displayed by pressing the following keys: # . F7 TEST F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 164 - TEST FRONT menu; Transfers the VTR to TEST FRONT PANEL menu screen.
– 164 – TEST FRONT menu This menu is displayed by pressing the following keys: # F6 TEST Key F1 F2 F3 – F7 F8 F9 – F13 Key designation PANELDisplay check. KEYCHECKFront panel key check. —— EXIT —— Description Transfers the VTR to TEST FRONT PANEL menu screen. Transfers the VTR to the TEST KEY CHECK ...
Page 165 - Returns the VTR to the TEST FRONT menu screen.; TEST FRONT PANEL menu
– 165 – Key F1 F2 – F7 F8 F9 – F13 Key designation MODEDisplay dot check. —— EXIT —— Description The entire display panel is lighted up in a fixed pattern anddisplay dots are checked. Each time the key is pressed, 12 typesof pattern are displayed. Returns the VTR to the TEST FRONT menu screen. TEST ...
Page 166 - TEST FRONT KEY CHECK IN menu
– 166 – TEST FRONT KEY CHECK IN menu This menu is displayed by pressing the following keys: # # . F2 F6 TEST F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 Key F1 – F7 F8 F9 – F13 Key designation —— EXIT —— Description Returns the VTR to the TEST FRONT menu screen.
Page 167 - Dial and controls
– 167 – TEST FRONT KEY CHECK IN menu ∑ Dial and controls When the ADJUST control, headphones control or search dial isturned, the number of pulses counted is displayed. ∑ LEDs Each time the F1 key is pressed, the LEDs on the panel light up insequence and are checked. ∑ Keys When a key (button) on th...
Page 168 - Inserting the IC card
– 168 – Inserting the IC card The insertion slot for the IC card is located on the back left of the front panel.Insert the IC card before using the TEST IC CARD menu. Eject button IC card
Page 169 - TEST IC CARD menu; Preparations; When
– 169 – TEST IC CARD menu Preparations When an error to be logged has occurred, this unit enables information on the date and time of the occurrenceof the error to be recorded in addition to the TC information in the log. Initial registration of the date and timeis required in order for this informa...
Page 171 - TEST IC CARD USER menu
– 171 – ≥ User Files (TEST menu) O TEST IC CARD: USER menu function settings N Key F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 Key designation LOAD SAVE DELETE —— TO VTRUP_LD TO CARDDOWN_LD W/SYS EXIT LOCK —— —— —— TRNS MD Description Press together with F key.This calls the IC card’s user files. Pre...
Page 172 - TEST IC CARD MULTI CUE menu
TEST IC CARD MULTI CUE menu This menu is displayed by pressing the following keys: > > F2 F13 TEST Description Press together with F key.This uploads saved files from the ICcard to the VTR. Press together with F key.This downloads saved files from theVTR to the IC card. This displays the MULTI...
Page 173 - TEST IC CARD MULTI CUE SELECT menu
– 173 – Description Press together with F key.This uploads the selected files from theIC card to the VTR. This selects the page to betransferred. This returns the system to the TESTIC CARD: MULTI CUE menu. This selects the page to betransferred. Key F1 F2 F3 – F 7 F8 F9– F13 Key designation TO VTRUP...
Page 174 - TEST IC CARD MULTI CUE MONITOR menu
– 174 – TEST IC CARD MULTI CUE MONITOR menu This menu is displayed by pressing the following keys: > > > . F3 F2 F13 TEST Description Returns the VTR to the TEST IC CARD MULTI CUE menuscreen. Key F 1 – 1 – F2 F3 – F7 F8 F9 – F13 Key designation —— 1–5Designation of 1–5 cuenumber. EXIT 6 – 1...
Page 175 - TEST IC CARD ERROR LOG menu; Error Log Files
– 175 – Description Press together with F key.This uploads saved files from the VTRto the IC card.“TO FRONT” is displayed whenMACHINE CURRENT DATA has beenselected.When the file upload has beencompleted, the system automaticallytransfers to the MONITOR menu. This displays the ERROR_LOG datasaved in ...
Page 176 - TEST IC CARD ERROR LOG MONITOR menu
TEST IC CARD ERROR LOG MONITOR menu This menu is displayed by pressing the following keys: > > > keys are pressed. To check the current log data of the VTR, first download the machine current data, and then monitor the logdata. F2 F3 F13 TEST Description Returns the VTR to the TEST IC CARD ...
Page 177 - Error messages; Four kinds of error messages are displayed by this VTR.
– 177 – Error messages Four kinds of error messages are displayed by this VTR. (1) DIAG menu A warning mark (W) blinks at the top left of the menu screen when an erroneous setting, failureto verify a condition, warning or other problem that interferes with the use of the VTR has arisen.When the DIAG...
Page 178 - DIAG menu error messages; There are the following three kinds of DIAG menu screens.; DIAG LAST menu
DIAG menu error messages A warning mark (W) blinks at the top left of the screen when an er-roneous setting, failure to verify a condition, warning or otherproblem that interferes with the use of the VTR has arisen. If the DIAG key is pressed while a warning is shown, an error message appears on the...
Page 179 - DIAG ACTIVE menu; When there are multiple warnings
– 179 – DIAG ACTIVE menu When the DIAG key is pressed while the warning mark is displayed, the DIAG ACTIVE menu below appears. Description Transfers the VTR to the DIAG MASKED menu screen. Transfers the VTR to the DIAG LAST menu screen. Masks (cancels) the warning currently on display in the DIAGACT...
Page 180 - When there are 2 or more canceled (masked) warnings; DIAG MASKED menu
– 180 – ∑ When there are 2 or more canceled (masked) warnings ≥ Error messages are displayed from item of highest priority. ≥ All the messages can be viewed sequentially by operating the cursor and the up/down arrow keys. ≥ Total number of warnings is displayed. Key F1 F2 F3 F4 F5 F6 – F13 Key desig...
Page 181 - When 2 or more warnings have occurred
– 181 – ∑ When 2 or more warnings have occurred ≥ Error messages are displayed from item of highest priority. ≥ All the messages can be viewed sequentially by operating the cursor and the up/down arrow keys. Key F1 F2 F3 – F6 F7 F8 – F13 Key designation MENU ACTIVE MENU MASKED LAST CLEAR —— Descript...
Page 182 - DIAG error messages; Message
– 182 – DIAG error messages Message FAN STOP1 FAN STOP2 NO CUE ERASE CURRENT NO TC ERASE CURRENT NO FULL ERASE CURRENT NO CTL ERASE CURRENT VIDEO CONCEAL SW OFF INNER ECC SW OFF OUTER VIDEO ECC SWOFF OUTER AUDIO ECC SWOFF AUDIO CONCEAL SW OFF T-REE TURNS TOO SLOW SERVO UNLOCK CTL NOT DETECTED LOW RF...
Page 186 - AUTO OFF error messages
AUTO OFF error messages If a problem has occurred and the VTR cannot continue operating or the mechanism or tape may be damagedby continued operation, the AUTO OFF lamp on the VTR’s front panel come on, the buzzer sounds, and anerror message appears on the screen. In this situation, stop operating t...
Page 188 - SYSTEM error messages
SYSTEM error messages When a problem has occurred in the VTR and its operation can no longer be guaranteed, the system errorlamp comes on, the buzzer sounds, and an error message appears on the screen. In this situation, stop operating the VTR immediately, and proceed to fix the trouble. ≥ With syst...
Page 190 - Operation messages
– 190 – Operation messages In the majority of cases, when a mistake has been made in operating a button or key during automatic editing,a message appears at the bottom right of the screen (above the tape speed display) telling the user how toproceed with operation. ≥ The message is automatically cle...
Page 192 - Screen saver function
– 192 – Screen saver function This function is designed to prolong the service life of the VTR’s large display screen.The screen’s life may be shortened when the screen continuously displays menu screens on which no move-ment is occurring.Consequently, when the same menu screen on which no movement ...
Page 194 - P E
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANYUNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region:1225 Northbrook Parkway, S...
Panasonic RB F10
User Manual
Panasonic SC HTB200
User Manual
Panasonic CS Z25UFRAW CU Z25UBRA
Manual
Panasonic CS Z50UFRAW CU Z50UBRA
User Manual
Panasonic DMW BLK22
User Manual
Panasonic NI WL55
Manual
Panasonic DMP BD903
Manual
Panasonic NN ST23QM
Manual
Panasonic FV-1115VK3
User Manual
Panasonic EH NA0J
Manual
Panasonic FV 30BG3
Manual
Panasonic RE7 59
User Manual
Panasonic NE C1275
Manual
Panasonic RG T810LHA
User Manual
Panasonic CF SR
User Manual
Panasonic RZ B110W
User Manual