Orion ORION MaxxBass - Manuals

Page 2 - TABLE OF CONTENTS; Why is

TABLE OF CONTENTS Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 3 - Maxx

CONGRATULATIONS Thank you for choosing Orion audio equipment. At Orion we proudly design, engineer and manufacture audio products for aftermarket car audio.Our award winning engineering team utilizes innovative technology toconsistently deliver Absolutely State of the Art performance, sound quality,...

Page 4 - WHY IS; WHAT IS

recommended in two configurations. (Please see Wiring Configurations formore details.) 1) Front Stereo ConfigurationOne Maxx Bass ® Processor is used between the front channel source and front speaker amplifier to increase the bass response on only the front speakers.This is recommended to improve b...

Page 9 - WIRING CONFIGURATIONS; The; Front Stereo Configuration

WIRING CONFIGURATIONS The Maxx Bass ® Processor is recommended in two different configurations. 1. Front Stereo Configuration The figure below illustrates the wiring for a front stereo configuration. One Maxx Bass ® Processor is used between the front channel source and front speaker amplifier to in...

Page 10 - Dual Stereo Configurations; For systems without rear subwoofers, the user may prefer to use two; WIRING PROCEDURES

2. Dual Stereo Configurations For systems without rear subwoofers, the user may prefer to use two Maxx Bass ® Processors, one for the front speakers and one for the rear speakers. The units should be wired between the in-dash CD Receiver and thepower amplifiers as shown below. NOTE: As an option, be...

Page 12 - INPUT; It is important to connect an input signal to both RCA

INPUT To use Speaker Level Inputs (common ground head units only), connect RCAplugs to the front or rear speaker leads as shown. NOTE: It is important to connect an input signal to both RCA input jacks if a stereo amplifier is used, otherwise theconnected channel receives full range and the disconne...

Page 14 - TROUBLESHOOTING; Orion

TROUBLESHOOTING NO SOUND Is the POWER LED lit? YES NO Check Input cables for signal by Check power and remote Connecting them straight to the turn-on wire for voltage. Subwoofer amplifier. Make sure the ground wire is Secure. ANY SOUND NOW? YES NO Problem is in the Crossover. Problem is elsewhere in...

Page 15 - OPPOSITE CHANNEL

OPPOSITE CHANNEL SAME CHANNEL Reverse RCAs to head unit Problem is in the Crossover. (Check Balance Control) See your local Authorized Orion dealer. SOUND IS NOW IN OPPOSITE CHANNEL SAME CHANNEL Problem is in the head unit. Problem is in the RCA cables. LOW OUTPUT FROM ONE BAND Check crossover frequ...

Page 17 - Warranty

Warranty LIMITED TWO YEAR CONSUMER WARRANTY: Directed Electronics, Inc. promises to the original purchaser, to replace this product should it prove to be defective in workmanship or material under normal use, for a period of two years from the date of purchase by the dealer as indicated by the date ...