Oregon Scientific WMR100NA - Manuals

Page 3 - Temperature / Heat Index / Wind Chill Area

3 EN BACK VIEW 1 3 2 45 6 7 1. AC adapter socket2. RESET: Returns unit to default settings 3. SEARCH: Searches for sensors or for the radio- controlled clock signal 4. UNIT: Selects unit of measurement 5. Battery compartment6. WMR100N only – EU / UK radio signal 7. USB connector LCD DISPLAY 1 2 3 4 ...

Page 4 - display; Humidity / Dew Point Area; WIND SENSOR; RESET; button

4 EN 4. Rain rate is showing5. UVI / barometric pressure (mmHg, inHg or mb / hPa)/ rainfall readings (in / hr or mm / hr) 6. UVI level indicator7. Accumulated rainfall is showing8. Past 24hrs rainfall is showing9. Altitude is showing10. UVI / barometric pressure / rainfall historical bar chart displ...

Page 7 - IMPORTANT; HUMIDITY SENSOR MOUNTED SEPARATELY; To set up the Rain Gauge:

7 EN 16 4 5 6 4. Insert wind sensor into the top of the bracket.5. Using screws, ﬁx aluminium pole ﬁrmly into place.6. Slide outdoor sensor onto bracket. IMPORTANT For best results, point the wind vane North. ALTERNATIVE SET UP: TEMPERATURE / HUMIDITY SENSOR MOUNTED SEPARATELY 1. Insert 4 type A scr...

Page 8 - SET UP BASE STATION; CLOCK RECEPTION

8 EN SET UP BASE STATION NOTE Install batteries in the remote sensor before the base station matching the polarities (+ and -). For continuous use, please install the AC adapter. The batteries are for back-up use only. NOTE Make sure the adapter is not obstructed and is easily accessible to the unit...

Page 9 - For best reception, the base station should be; CLOCK ALARM

9 EN NOTE For best reception, the base station should be placed on a ﬂat, non-metallic surface near a window in an upper ﬂoor of your home. The antenna should be placed away from electrical appliances and not be moved around when searching for a signal. CLOCK / CALENDAR To manually set the clock: (Y...

Page 11 - UV INDEX

11 EN To select the wind speed unit: Press UNIT (at the bottom of the base station) to switch between: • Metres per second ( m / s ) • Kilometers per hour ( kph ) • Miles per hour ( mph ) • Knots ( knots ) The wind level is shown by a series of icons: ICON LEVEL DESCRIPTION N/A <2 mph (<4km/h)...

Page 12 - * For Windows XP users, please go straight to

12 EN 2. Rotate the dial left or right to set the desired values.3. Press ALARM to conﬁrm the settings. To activate / deactivate the high UV alarm: 1. In the UV / Barometer / Rainfall Area and UVI reading display, press ALARM repeatedly to select the desired alarm. 2. Press MEMORY / ON / OFF to acti...

Page 15 - COUNTRIES RTTE APPROVAL COMPLIED; All EU countries, Switzerland

15 EN Operating range -30°C to 60°C (-4°F to 140°F) Accuracy -20°C – 0°C: +/- 2°C (+/- 4.0°F)0°C - 40°C: +/- 1°C (+/- 2.0°F)40°C - 50°C: +/- 2°C (+/- 4.0°F)50°C - 60°C: +/- 3°C (+/- 6.0°F) Comfort 20°C to 25°C (68°F to 77°F) Memory Current, Min and Max temp.Dew Point w/ Max and MinWind chill temp. a...

Page 16 - FCC STATEMENT; WARNING; Changes or modifications not expressly; NOTE; This equipment has been tested and found; DECLARATION OF CONFORMITY; We

16 EN FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARN...