OPTOMA XX152 N - Manuals - manualsarea.com

Page 2 - English; Usage Notice; Class B emissions limits; Safety Information

English 2 Usage Notice The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The excla...

Page 3 - Please follow all warnings, precautions and mainte-; To reduce the risk of fi re or electric shock, do; Precautions

English 3 Usage Notice Please follow all warnings, precautions and mainte- nance as recommended in this user’s guide. When the lamp reaches the end of its life, the pro- jector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the proce- dures listed under “R...

Page 4 - Near any appliance generating a strong magnetic field.; Viewing 3D PROJECTOR using the 3D function; Warning

English 4 Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display hous- ing. Disconnect the power plug from AC outlet if the product is not be- ing used for a long period of time. Do not: Block ...

Page 5 - tions, those who are sleep deprived or under the influence of

English 5 Usage Notice Pregnant women, the elderly, sufferers of serious medical condi- tions, those who are sleep deprived or under the influence of alcohol should avoid utilizing the unit’s 3D functionality. If you experience any of the following symptoms, stop viewing 3D pictures immediately and ...

Page 6 - Avoid staring/facing directly into the projector beam at all; Eye Safety Warnings

English 6 Usage Notice ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In order to minimize t...

Page 7 - Introduction; Unpack and inspect the box contents to ensure all parts listed; WEEE Card; Package Overview

English 7 Introduction POW ER TEMP LAMP STAN DBY Power Cord .8m Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact Optoma customer service. Documentation:  User’s Manual  Warranty Card  Quick Start Card  WEEE Card Due to d...

Page 8 - Product Overview; Main Unit

English 8 Introduction Product Overview Power ButtonLED IndicatorsIR ReceiversTilt-Adjustment FeetLamp Replacement CoverInput / Output Connection PortsZoom RingHorizontal Lens Shift AdjustmentFocus AdjustmentVertical Lens Shift Adjustment .2.3.4.5.6.7.8.9.0. Main Unit POWER TEMP LAMP STAN DBY 1 6 5 ...

Page 9 - Connection Ports

English 9 Introduction Connection Ports 2V Trigger A2V Trigger BRS232Composite Video3D Sync Out (5V)Component VideoVGA InputUSB ServiceHDMI HDMI 2Power Socket .2.3.4.5.6.7.8.9.0.. 1 4 11 2 5 7 8 9 10 6 3

Page 10 - Remote Control

English 0 Introduction Remote Control Power OnPower OffGammaLamp ModeAdvancedFour Directional Select KeysMode (Display Mode)Image ScalingSBS ModeRe-SyncVideoHDMI 2VGAYPbPrHDMI PureEngineMenuEnterColor Management SystemDynamicBlackContrastBrightness .2.3.4.5.6.7.8.9.0..2.3.4.5.6.7.8.9.20.2.22. 21 2 3...

Page 11 - Backup Remote Control

English Introduction M n O 2 - L iC E L L 3 V O L TS JA PA NH CR2025 M 3 V O L TS CR2025 3 V O L TS CR2025 Power On Off MENU Re-Sync Source SBS Mode Backup Remote Control Power OffPower OnEnterFour Directional Select KeysSBS ModeSourceRe-SyncMenu .2.3.4.5.6.7.8. 1 3 5 6 8 7 2 4 When using the remote...

Page 12 - Installation; Connect to Computer/Notebook

English 2 Installation R Due to the difference in ap- plications for each country, some regions may have different acces- sories. * Optional Acces- sory   RS232 Cable *VGA Input Cable *HDMI Cable *Power Cord .2.3.4. 3 4 1 2 Connect to Computer/Notebook N OTE

Page 13 - Connect to Video

English 3 Installation R Composite Video CableEmitter cable *RCA Component Cable for YPbPr *VGA to RCA Component Cable for YPbPr *HDMI Cable *Power Cord .2.3.4.5.6. 4 5 1 2 Connect to Video 6 Due to the difference in ap- plications for each country, some regions may have different acces- sories. 2V ...

Page 14 - Connect to 3D Video Devices; Once you have connected your devices together with HDMI

English 4 Installation Connect to 3D Video Devices The 3D video source device must be powered on before the 3D projector.  If input video is normal 2D, please press “SBS Mode” and switch to “Off”. If “SBS Mode” is active, 2D video content will not display correctly.   N OTE N OTE Once you have co...

Page 16 - Using the 3D glasses

English 6 Installation To turn ON 3D glasses: Press the “Power” button and the LED will flash one time indicating the glasses are ready to use 3D mode. Verify that 3D content is being sent to the projector and signal is compat- ible with projector specifications. Turn on the “3D Mode” (DLP-Link/VESA...

Page 17 - Powering On the Projector; tor or on the remote control. The Power LED will fl ash blue.; Powering On/Off the Projector

English 7 Installation POWER TEMP LAMP STAN DBY POWER TEMP LAMP STAN DBY Powering On the Projector . Remove the lens cap.  2. Securely connect the power cord and signal cable. When con- nected, the Power LED will turn red. 3. Turn on the lamp by pressing “ ” button on the side of the projec- tor or...

Page 18 - Powering Off the Projector; “ ” button on the; Warning Indicator; When the “TEMP” indicator flashes red, it indicates the fan has

English 8 Installation Powering Off the Projector . Press the “ ” button on the remote control or “ ” button on the side of the projector two times with one second interval to turn off the projector. First time to push the button will display the follow- ing message on the screen. Press the “ ” butt...

Page 19 - Adjusting the Projector’s Height; The projector is equipped with elevator feet for adjusting the; Use screw in foot to raise the image to the desired height angle; Adjusting the Projected Image

English 9 Installation Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. To raise the image: Use screw in foot to raise the image to the desired height angle and fine-tune the display angle.  To lower the image: Use screw in foot to lower ...

Page 20 - The minimum vertical image offset is fixed at 5% of the image

English 20 Installation Horizontal Lens Shift Lever Adjusting Projected Image Position Using PureShift The PureShift feature provides a lens shift function that can be used to adjust the position of the projected image either horizontally or vertically within the range detailed below. PureShift is a...

Page 22 - PureShift Range Diagram; Adjusting Projection Image Size

English 22 Installation Diagonal length (inch) size of 6:9 Screen Screen Size W x H (6:9) Projection distance (D) Offset (Hd) (m) (feet) (m) (feet) Width Height Width Height wide tele wide tele (m) (feet) 30 0.66 0.37 2.8 .23 - .5 - 4.97 0. 0.37 45 .00 0.56 3.27 .84 .49 2.27 4.88 7.45 0.7 0.55 50 . ...

Page 23 - User Controls; Using the Remote Control; Confirm your item selection.

English 23 User Controls Using the Remote Control Power On Turn on the projector. Brightness Adjust the brightness of the image. Power Off Turn off the projector. Contrast Control the degree of difference between the lightest and darkest parts of the picture. Gamma Set up gamma curve type. DynamicBl...

Page 24 - nologies that enhances the quality

English 24 User Controls Power On Off MENU Re-Sync Source SBS Mode Using the Remote Control 6:9 Scale the image to 6:9 aspect ratio. 4:3 Scale the image to 4:3 aspect ratio. Letter Box Enable the viewing of the letter- boxed nonanamorphically en- hanced movie at full screen width. Part of the origin...

Page 25 - The Projector has multilingual On-screen Display menus that; How to operate; . To open the OSD menu, press “Menu” on the Remote Control or; On-screen Display Menus

English 25 User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate . To open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2...

Page 26 - Menu Tree

English 26 User Controls Menu Tree Display Mode Cinema / Reference / Photo / Bright / 3D / ISF Day / ISF Night / User Contrast -50~50 Brightness -50~50 Sharpness 0~15 #1 Color -50~50 #1 Tint -50~50 Advanced Noise Reduction 0~10 Gamma Film / Video / Graphics / Standard PureEngine PureDetail / PureCol...

Page 27 - IMAGE; Display Mode; tings are all configured to standard reference levels.

English 27 User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Cinema: For home theater. Reference: This mode is intended to reproduce, as close as possible, the image the way the movie director intended. Color, color temperature, brightness, contra...

Page 29 - and fine tuning is completed, utilize the Gamma Adjustment steps

English 29 User Controls Noise Reduction The Noise Reduction reduces the amount of visible noise inter- laced signals. The range is from “0” to “0”. (0: Off) Gamma This allows you to set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps to ...

Page 30 - PureDetail

English 30 User Controls PureDetail PureDetail is an edge enhancement tool that enables the edges in the projected image is be enhanced thus providing more per- ceived detail. PureColor This adjustable item utilizes a new color-processing algorithm and enhancements to enable the picture’s vividness ...

Page 31 - Color Temperature; Press ► into the next menu and then use ▲ or ▼ to select item.

English 3 User Controls Color Temperature Select a color temperature from D50, D65, D75, D83, D93 and Native. Color Gamut Select an appropriate color gamut from Native, DLP-C, HDTV, EBU or SMPTE-C. CMS (Color Management System) Press ► into the next menu and then use ▲ or ▼ to select item. Select on...

Page 32 - Color Space; Select an appropriate color matrix type from AUTO, RGB or YUV.; RGB Channel; Use ◄ or ► to select from Normal, Red, Green or Blue channels.

English 32 User Controls RGB Gain/Bias Press ► into the next menu and then use ▲ or ▼ to select item. Use ◄ or ► to select Red, Green, or Blue for brightness (Gain) and contrast (Bias). Reset: Choose “Yes” to return the factory default settings for color adjustments. Color Space Select an appropriat...

Page 33 - Format; of content, you can use LBX mode to fill the image on the 16:9; DISPLAY

English 33 User Controls Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4x3 input sources. 6:9: This format is for 6x9 input sources, like HDTV and DVD enhanced for Widescreen TV. LBX: This format is for non-6x9, letterbox source and for us- ers who use externa...

Page 34 - Shift the projected image position vertically.

English 34 User Controls “SuperWide” is Off“ as default. How to use “Su- per-Wide”: . Obtain a 2.0: aspect ratio screen. 2. Switch Super- Wide ON. 3. Align the projector image correctly on the screen. 4. Enjoy movies without black bars.   Display area Display on Screen Picture area Input Signal 4:...

Page 35 - D Mode; DLP Link: Select “DLP Link” to use optimized settings for DLP

English 35 User Controls DISPLAY | 3D 3D Mode DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D images. (For DLP glasses, please refer to page 6). VESA 3D: Select “VESA 3D” to use optimized setting for VESA 3D images. (For 3D emitter, please refer to page 3). 3D -> 2D 3D: Disp...

Page 36 - D Format; Off: Press the “Off” to disable 3D format conversion.

English 36 User Controls 3D Format Off: Press the “Off” to disable 3D format conversion. SBS: Display 3D signal in “Side-by-Side” format. Top and Bottom: Display 3D signal in “Top and Bottom” format. Frame Sequential: Display 3D signal in “Frame Sequential” format. 3D Sync. Invert Press the “On” to ...

Page 37 - Menu Location; Choose the menu location on the display screen.; Lamp Setting; Projection; This is the default selection. The image is projected straight on; SYSTEM

English 37 User Controls Menu Location Choose the menu location on the display screen. Lamp Setting Press ► into the next menu and then use ▲ or ▼ to select item. Projection Front-Projection This is the default selection. The image is projected straight on the screen. Rear-Desktop When selected, the...

Page 38 - Test Pattern

English 38 User Controls Test Pattern Display a test pattern. There are Grid, White and Off. Background Color Use this feature to display a “Blue”, “Black”, or “Gray” screen when no signal is available. 2V Trigger A 2V trigger A provides a standard trigger for motorized screens. 2V Trigger B Press t...

Page 40 - Lamp Hour; SYSTEM | Lamp Settings

English 40 User Controls Lamp Hour Display the cumulative lamp operating time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear up 30 hours before suggested replacement of lamp. Lamp Mode Bright: Choose “Br...

Page 41 - SETUP; Choose the multilingual OSD menu. Press ◄ or ► into the sub

English 4 User Controls SETUP Language Choose the multilingual OSD menu. Press ◄ or ► into the sub menu and then use the ▲ or ▼ to select your preferred language. Press “Select (Enter)” to finalize the selection. Input Source Enable input sources from HDMI , HDMI 2, Component, VGA and Video. Press ►...

Page 42 - Auto Power Off

English 42 User Controls “Signal” is not supported when the input source is HDMI.  Auto Power Off Set the interval of power-off of the system, if there is no signal input. (In minutes). Signal For RGB/Component Source Frequency: Change the display data frequency to match the frequency of your compu...

Page 43 - Appendices; Troubleshooting; If you experience a problem with your projector, please refer to; Image Problems; No image appears on-screen; Make sure the projection screen is between the required dis; The image is stretched when displaying 16:9 DVD title

English 43 Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image Problems No image appears on-screen Ensure all the cables and power connections are cor...

Page 44 - Image has slanted sides:

English 44 Appendices Image has slanted sides: If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. Use “Display-->V Keystone” from the OSD to make an adjust- ment. Image is reversed Select “System-->Projection” from the OSD and adjust ...

Page 45 - Other Problems; The projector stops responding to all controls; Remote Control Problems; If the remote control does not work

English 45 Appendices Other Problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out ...

Page 46 - LED Lighting Messages

English 46 Appendices Power LED on: No signal; OSD menu appears and signal had been detected. Power LED off: Signal had been detected but OSD menu disappears.   POWER TEMP LAMP STANDBY POWER TEMP LAMP STANDBY LED Lighting Messages N OTE Message Power LED (Red) Power LED (Blue) Temp LED (Red) Lamp ...

Page 47 - Power down timer active:; On Screen Messages

English 47 Appendices Power down timer active: Lamp warning: Power off:    On Screen Messages

Page 48 - The projector automatically detects the lamp life. When the; Replacing the Lamp

English 48 Appendices The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector h...

Page 49 - Lamp Replacing Procedure:

English 49 Appendices Lamp Replacing Procedure: . Switch off the power to the projector by pressing the Power button. 2. Allow the projector to cool down at least 30 minutes. 3. Disconnect the power cord. 4. Unlock the lamp cover.  5. Push up and remove the cover.  6. Use a screwdriver to remove t...

Page 50 - Compatibility Modes; Computer Compatibility for PC

English 50 Appendices Compatibility Modes Signal Resolution Frequency H. (KHz) Refresh Rate (Hz) Video Digital Analog NTSC - 5.734 60 O - - PAL/SECAM - 5.625 50 O - - 720 x 400 3.5 70 - O O 720 x 400 37.9 85 - O O 720 x 576 50 - O O VGA 640 x 480 3.5 60 - O O 640 x 480 67 - O O 640 x 480 37.9 72.8 -...

Page 51 - Computer Compatibility for MAC

English 5 Appendices Signal Resolution Frequency H. (KHz) Refresh Rate (Hz) Video Digital Analog HDTV 920 x 080i 50 - O O 920 x 080i 60 - O O 920 x 080p 24 - O O 920 x 080p 50 - O O 920 x 080p 60 - O O 280 x 720 45 60 O - - 280 x 720p 50 - O O 280 x 720p 60 - O O SDTV 720 x 576 3.3 50 O - - 720 x 57...

Page 52 - D Input Video Compatibility

English 52 Appendices 3D Input Video Compatibility  Input Resolution HDMI .4a 3D Input Input Timing 280 x 720p @ 50Hz Top-and-Bottom 280 x 720p @ 60Hz Top-and-Bottom 280 x 720p @ 50Hz Frame packing 280 x 720p @ 60Hz Frame packing 920 x 080i @ 50 Hz Side-by-Side (Half) 920 x 080i @ 60 Hz Side-by-Sid...

Page 53 - RS232 Pin Assignments

English 53 Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments 3 1 5 6 8 Pin no. Name I/O (From Projector Side) NC __ 2 RXD IN 3 TXD OUT 4 NC __ 5 GND Signal Ground 6 NC __ 7 RTS __ 8 CTS __ 9 NC __

Page 54 - RS232 Protocol Function List

English 54 Appendices RS232 Protocol Function List Baud Rate 9600 Data Bits 8 Parity None Stop Bits 1 Flow Control None UART16550 FIFO Disable Projector Return (Pass): P Projector Return (Fail): F ~ X X X X X Lead Code space ASCII Power On/Off n=1/n=0 & 2 ~XX00 n Re-sync ~XX01 n HDMI 1 n=1 ~XX12...

Page 56 - Ceiling Mount Installation

English 56 Appendices Please note that damage resulting from incorrect installation will invalidate the warranty.  To prevent damage to your projector, please use the Optoma ceil- ing mount.If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the ...

Page 57 - Optoma Global Offi ces; For service or support please contact your local offi ce.

English 57 Appendices Optoma Global Ofﬁ ces USA 378 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Canada 2420 Meadowpine Blvd., Suite #05 Mississauga, ON, L5N 6S2, Canada www.optoma.ca Latin America 378 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Europe 42 Caxton Way, The Watfo...

Page 59 - Regulation & Safety Notices; This appendix lists the general notices of your projector.; FCC Notice; Notice: Shielded cables

English 59 Appendices Regulation & Safety Notices This appendix lists the general notices of your projector. FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 5 of the FCC rules. These limits are designed to provide reasonabl...

Page 60 - Declaration of Conformity for EU countries; Do not throw this electronic device into the trash when; Disposal instructions

English 60 Appendices Declaration of Conformity for EU countries EMC Directive 2004/08/EC (including amendments) Low Voltage Directive 2006/95/EC R & TTE Directive 999/5/EC (if product has RF function) Do not throw this electronic device into the trash when discarding. To minimize pollution and ...