OPTOMA EP702 - Manuals

OPTOMA EP702 – Manual in PDF format online.

Manuals:

Manual

Manual OPTOMA EP702

Summary

Page 2 - Precautions; Usage Notice

2 English Precautions Follow all warnings, precautions and maintenance as recommended in thisuser’s manual to maximize the life of your unit. Do: q Turn off the product before cleaning. q Use a soft cloth moistened with mild detergent to clean the display housing. q Disconnect the power plug from AC...

Page 3 - Product Features; Introduction

3 English Product Features This product, is an SVGA single chip 0.7”DLP ä Projector. The outstanding features of it are listed as follows: q True SVGA, 800 x 600 addressable pixels q 5 lbs (2.3 kgs) lightweight compact design q Single chip DLP ä technology q XGA compression and VGA re-sizing q 120 W...

Page 4 - Package Overview

4 English Package Overview This projection display comes with all the items shown below. Check to makesure your unit is complete. Contact your dealer immediately if anything ismissing. Projection Display Power Cord S-Video Cable Audio-In Cable for Computer VGA Cable Remote Control Carrying Case User...

Page 5 - Product Overview; Main Unit

5 English Product Overview Main Unit Speaker Panel Control Focus Ring Remote ControlReceiver Elevator Button Security Lock Slot Connection Ports Carrying Handle Power Connector Power Switch Elevator Foot Lens

Page 6 - Connection Ports

6 English Connection Ports Panel Control Computer InputConnector Power Switch S-video Connector Audio OutputConnector Audio IuputConnector Composite Video Connector Power Connector Power /Standby Lamp Temperature Enter Menu Reset Source Four Directional Select Keys

Page 7 - Remote Control

7 English Remote Control Source Resync Reset Freeze/CLR Keystone Correction Power / Standby Volume ( + / - ) Mute Four Directional Select Keys Enter Menu Picture in Picture Zoom In / Zoom Out

Page 8 - Connecting the Projector to Desktop Computer; Installation

8 English Connecting the Projector to Desktop Computer Installation Power Cord VGA Cable Computer Output 1. Make sure the projector and your computer are turned off. 2. Connect one end of the projector signal cable to the projector; connect the other end to the VGA connector on the computer and tigh...

Page 9 - Connecting the Projector to Portable Computer

9 English Connecting the Projector to Portable Computer 1. Make sure the projector and your notebook are turned off. 2. Connect one end of the projector signal cable to the projector; connect the other end to the VGA connector on the notebook and tighten the screws. 3. Connect one end of the power c...

Page 10 - Connecting the Projector to Other Video Sources; If you use the video cable:

10 English Connecting the Projector to Other Video Sources v If your video player uses a round, one-prong composite video connector, you’llneed the video cable. If your video player uses a round, four-prong s-videoconnector, you’ll need the s-video cable ( See page 11 for detail information). Both c...

Page 12 - Powering On the Projection Display; on the Remote Control or Panel Control to switch.; Power On/Off the Projection Display

12 English u u u u u Powering On the Projection Display 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. 3. Turn on the main power switch on the back of the projector and allow the projector to warm up for 1-2 minutes. 4. Turn on the lamp by pressing...

Page 13 - Powering Off the Projection Display

13 English u u u u u Powering Off the Projection Display 1. Press the “Power/Standby” button to turn off the projector lamp. 2. After pressing the “Power/Standby” button, you will see a message “ Power off the lamp? ” on the on-screen display. Press the “Power/Standby” button again to confirm.Otherw...

Page 14 - Adjusting the Projected Image; Adjusting the Projector Height; To raise the projector:; To lower the projector:

14 English Adjusting the Projected Image u u u u u Adjusting the Projector Height The projector is equipped with an elevator foot for adjusting the projector height. To raise the projector: 1. Press and hold the elevator button . 2. Raise the projector to the desired display angle , then release...

Page 15 - Adjusting the Projector Focus

15 English (6.7’) (13.3’)(20.0’)(26.7’) (30.0’) To focus the image, rotate the focus ring until the image is clear. The projector will focus atdistances from 3.3 feet to 33 feet (1m to 10m). u u u u u Adjusting the Projector Focus u u u u u Image Size Adjustment Focus Ring (33.0’) *This graph is for...

Page 16 - User Controls; M e n u; R e s e t

16 English There are two ways for you to control the functions: Remote Control and Panel Control. User Controls Power / Standby 4 Power the lamp on and off when the main power switch is turned on. M e n u 4 Press “Menu” to open the on-screen display (OSD) menus and to switch among differentmenus. To...

Page 17 - Enter; K e y s t o n e

17 English Enter 4 Press “Enter” to confirm your selection. Four Directional Select Keys 4 Use or to select items. Use or to make adjustments for your selection. Volume 4 To increase the volume, press 4 To decrease the volume, press 4 To mute the volume, press “Mute” Resync 4 Automatically synchroni...

Page 18 - OSD Menus; Brightness; How to operate; Language; Display

18 English 4 The Projector has a multilingual On-Screen Display(OSD) menu that allows you to make image adjustments and change a variety of settings. In computersource, the OSD will be the “Computer OSD”. In video source, the OSD willbe the “ Video OSD”. The projector will detect the source automati...

Page 19 - Audio

19 English 4 Tracking Choose “ Tracking” item to synchronize the signal timing of the display with that of the graphic card. When you experience an unstable or flickering image, use this function to correct it. 4 Frequency “Frequency” is for changing the display data frequency to match the frequency...

Page 20 - Treble; Projection; PIP

20 English 4 Front-Desktop The factory default setting. 4 Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. 4 Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mountedprojectio...

Page 21 - Lamp; Exit Menu

21 English Lamp Exit Menu 4 Exit Menu When you want to close the OSD menu, choose this item and select “ Yes” to exit menu. 4 Reset All Choose “ Yes” to return the display parameters of the current mode to its factory default settings. 4 Lamp Warning Choose this function to show or hide the warning ...

Page 22 - Troubleshooting; Appendices

22 English Problem: No image appears on screen. 4 Ensure all the cables and power connections are correctly and securely connectedas described in the “Installation” section. 4 If the projector is plugged into a power strip, make sure the power strip is turned on. 4 Ensure the pins of connectors are ...

Page 23 - Problem: Image is unstable or flickering

23 English 4 If you are using a Notebook PC: 1. You are required to implement above steps of resolution setting of computer first. 2. Switch the Notebook PC display to the “external display only” or “CRT only”mode. 4 If you are experiencing difficulty in changing resolutions or your monitor freezes,...

Page 24 - Problem: The screen is outstretched when displaying 16:9 DVD

24 English Problem: The screen is outstretched when displaying 16:9 DVD The projector itself will automatically detect 16:9 DVD and adjust the aspect ratio by digitiza-tion to full screen with 4:3 default setting. If the projection display is still outstretched, you will also need to adjust the aspe...

Page 25 - Changing the lamp; Lamp Changing Procedure:; To replace the lamp module, reverse the previous steps.

25 English Changing the lamp The projection display will detect the lamp life itself. It will show you a warningmessage “ Lamp is running out of standard lifetime. Be sure to replace the lamp assoon as possible.”. When you see this message, change the lamp as soon aspossible. Make sure the projectio...

Page 26 - Specifications

26 English Specifications Light Valve - Single Chip DLP TM Technology Contrast Ratio - 400:1 (Full On / Full Off) - 150:1 (ANSI Contrast) Lamp - 120W User Replaceable P-VIP Lamp Number of Pixels - 800 pixels(H) X 600 lines(V) Displayable Color - 16.7M colors Projection Lens - F2.8 f=30.7mm Projectio...

Page 27 - Compatibility Modes

27 English Compatibility Modes * Compressed M ode Re s olution V. Fre que ncy (Hz) H. Fre que ncy (KHz) VESA VGA 640 x 350 70 31.5 VESA VGA 640 x 350 85 37.9 VESA VGA 640 x 480 70 31.5 VESA VGA 640 x 480 85 37.9 VESA VGA 720 x 400 70 31.5 VESA VGA 720 x 400 85 37.9 VESA VGA 640 x 480 60 31.5 VESA VG...