Page 2 - Reducing the Power Consumption in Standby; Table of contents; Speaker Layout
Contents 2 Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off". – HDMI CEC ( → p105 ) – HDMI Standby Thr...
Page 3 - Channel System; Connections; SUB Monitor; Playback
3 Before starting the procedure 6 Firmware Update 7 Update Information of the firmware 7 Firmware Update Procedure 7 Part Names 10 Front Panel 10 Display 12Rear Panel 13 Remote Controller 15 Inputting Characters 17 Speaker Layout The listening room and the speaker layout 19 3.1 Channel System 20 5.1...
Page 4 - Playing different audio and video
4 Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices 57 Listening To the Radio 59 Listening To the AM/FM Radio 59 Presetting a Radio Station 61 Listening Mode 62 Selecting a Listening mode 62 Quick Menu 64 Menu operations 64 Spotify 66AirPlay ® 67 Basic Operations 67 ...
Page 5 - Connecting a transmitter for playback; Setup; Setup Menu; Operations; Onkyo Controller; Troubleshooting; Listening Mode Effects; General Specifications
5 Connecting a transmitter for playback 88 Connections 88Playing Back 88 Setup Setup Menu 90 Menu list 90 1. Input/Output Assign 92 2. Speaker 96 3. Audio Adjust 101 4. Source 103 5. Hardware 105 6. Miscellaneous 114 Web Setup 116 Menu operations 116 Initial Setup with Auto Start-up Wizard 117 Opera...
Page 6 - Before starting the procedure; Note
6 Before starting the procedure What's in the box 1 2 5 3 4 1. Main unit (1) 2. Remote controller (RC-986R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) • Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) • Initial Setup Guide (1) * This is an online user m...
Page 7 - Firmware Update Procedure; Disclaimer; Updating the Firmware via Network; Update
7 Firmware Update This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware ma...
Page 8 - Updating via USB
8 and check. Error Code • -01, -10: Ethernet cable not found. Connect the Ethernet cable properly. • -02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20, -21: Internet connection error. Check the following: – Whether the router is turned on – Whether this unit an...
Page 9 - If an Error Message is Displayed
9 4. Connect the USB storage device to the USB port of this unit. • If an AC adapter is supplied with the USB storage device, connect the AC adapter, and use it with a household outlet. • If the USB storage device has been partitioned, each section will be treated as an independent device. 5. Press ...
Page 11 - Front Panel; PHONES jack; LISTENING MODE button; TONE CONTROL button; SETUP MIC jack
11 Front Panel M N P Q O 13. PHONES jack : Connect headphones with a standard plug (ø1/4″/6.3 mm). 14. LISTENING MODE button : Switches the listening mode ( → p62 ) by pressing "MOVIE/ TV", "MUSIC" and "GAME" repeatedly. 15. Input selector buttons : Switches the input to be p...
Page 12 - Display
12 Display 1 2 7 6 7 3 4 5 1. Speaker/Channel display : Displays the output channel that corresponds to the selected listening mode. 2. Lights in the following conditions. : Headphones are connected. : Connected by BLUETOOTH. : Connected by Wi-Fi. NET : Lights when connected to the network with the ...
Page 13 - Rear Panel
13 Rear Panel 1 2 3 4 5 6 7 4 8 1. DIGITAL IN OPTICAL/COAXIAL jacks : Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. TUNER AM/FM terminal : Connect the supplied antennas. 3. HDMI OUT jacks : Transmit video signals and audio signals with an HD...
Page 14 - J K; AUDIO IN jacks; SUBWOOFER PRE OUT jacks
14 Rear Panel 9 J K L 9. AUDIO IN jacks : Input AV component audio signals with an analog audio cable. 10. ZONE B PRE/LINE OUT jacks : Simultaneously output the same audio source as the speakers (ZONE A) connected to this unit by connecting this unit to wireless headphones, wireless speaker transmit...
Page 15 - Remote Controller
15 Remote Controller 1. ON/STANDBY button 2. Input selector buttons : Switches the input to be played. 3. Play buttons : Used for playback operations for the Music Server ( → p83 ) or USB device ( → p80 ). Also, switching to "CEC MODE" with "18. MODE button" allows you to operate an ...
Page 17 - Inputting Characters; CLEAR
17 Inputting Characters You can input characters or symbols on the keyboard displayed on the TV screen such as when inputting a password for Wi-Fi Setup ( → p107 ) or naming a preset radio station ( → p103 ). 1. Select a character or symbol with the cursors / / / on the remote controller and press t...
Page 18 - Speaker Installation (
Speaker Layout 7.1ch 3.1.2ch 5.1.2ch 3.1ch 5.1ch 18 Speaker Layout Speaker Layout This unit can be used in different ways, depending on the layout of the speakers you are installing. Select the speaker layout that suits the installation environment, then confirm the methods for installation and conn...
Page 19 - ZONE A
7.1ch 3.1.2ch 5.1.2ch 3.1ch 5.1ch 19 Speaker Layout The listening room and the speaker layout 1 2 1. ZONE A Speakers The speaker system set up in the main room (where this unit is located).2. ZONE B Speakers The 2 ch speaker system set up in a separate room (ZONE B). The same source can be played ba...
Page 20 - Basic system
7.1ch 3.1.2ch 5.1.2ch 3.1ch 5.1ch 20 Speaker Layout 3.1 Channel System This is a 3.1 Channel System that combines the front speakers with the center speaker and subwoofer. Basic system ( → p26 ) Zone B Zone B Main Room 3.1 ch + ZONE B ( → p26 ) 3.1 ch (Bi-Amping (Front)) ( → p26 )
Page 25 - Speaker Installation
Speaker Installation 5.1ch 7.1ch 3.1.2ch 5.1.2ch 3.1ch 25 Speaker Installation Speaker Installation How the speakers are set up depends on the size and shape of the room, so here we introduce just a basic layout example.The alphabetic symbols used in this chapter represent the following speakers: FL...
Page 26 - SW; SW
7.1ch 3.1.2ch 5.1.2ch 3.1ch 5.1ch 26 Speaker Installation 3.1 Channel System a FL FR C SW a: 22° to 30° FL, FR Place the Left and Right Front Speakers to match ear height. C The center speaker should be set up facing the listening position at an angle. SW Place the powered subwoofer between the ce...
Page 28 - High Speakers; Top Speakers
5.1ch 7.1ch 3.1.2ch 5.1.2ch 3.1ch 28 Speaker Installation 3.1.2 Channel System High Speakers a FHL FHR RHL RHR 3´ (0.9 m) or more 3´ (0.9 m) or more a: 22° to 30° FHL, FHR Place the front high speakers directly above the front speakers, angled to face the listening position. RHL, RHR Place the rea...
Page 30 - Speakers you can use with this unit and cable; Speaker Connections
Speaker Connections 5.1ch 7.1ch 3.1.2ch 5.1.2ch 3.1ch 30 Speaker Connections Speaker Connections (Before starting the procedure) Speakers you can use with this unit and cable connections 31 4-16Ω 3.1 Channel System 33, 34, 35 5.1 Channel System 36, 37, 38 7.1 Channel System 39 3.1.2 Channel System 4...
Page 31 - Connect the Speaker Cables
5.1ch 7.1ch 3.1.2ch 5.1.2ch 3.1ch 31 Speaker Connections Speakers you can use with this unit and cable connections Connections (Note) Speaker Impedance Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set &...
Page 32 - Connect the Subwoofer
5.1ch 7.1ch 3.1.2ch 5.1.2ch 3.1ch 32 Speaker Connections Connect the Subwoofer a a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
Page 34 - ZONE B
5.1ch 7.1ch 3.1.2ch 5.1.2ch 3.1ch 34 Speaker Connections 3.1 Channel System + ZONE B SPEAKER FL FR C SW SW FR FL FR(ZB) FL(ZB) C ZONE B FL(ZB) FR(ZB) MAIN ROOM
Page 48 - GAME
48 Connections Connecting Playback Devices Connecting an AV Component with HDMI Jack This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*...
Page 49 - CD
49 Connections Connecting an Audio Component This is an example of connection with an audio component. Connect a CD player using a digital coaxial cable or analog audio cable. a b OR CD a Analog audio cable, b Digital coaxial cable
Page 50 - Integrated
50 Connections Connecting an AV Component in a Separate Room (ZONE B connection) Connecting an Integrated Amplifier (ZONE B) While performing playback in the main room (where this unit is located), you can enjoy 2-ch audio of the same source in the separate room (ZONE B) at the same time. Use an ana...
Page 51 - AM
51 Connections Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape. a b a A B b AM AM FM FM a AM loop antenna, b Indoor FM antenna
Page 54 - Basic Operations
Playback 54 Playback Basic Operations Playing audio from an externally connected device 55 BLUETOOTH ® Playback 56 Listening To the Radio 59 Listening Mode 62 Quick Menu 64 Network Service Spotify 66 AirPlay ® 67 DTS Play-Fi ® 69 Amazon Alexa 70 Amazon Music 72 Connecting the Sonos System for Playba...
Page 55 - Input selector; Inputs; INPUT; TV’s REMOTE
55 Playback Playing audio from an externally connected device You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI MAIN/SUB button or "Quick Menu" ( → p64 ) to switch between MAIN and SUB. B...
Page 56 - Pairing
56 Playback BLUETOOTH ® Playback You can wirelessly play music on a smartphone or other BLUETOOTH wireless technology enabled device through the speakers connected to this unit. It is also possible to transmit the audio from this unit to BLUETOOTH enabled headphones, wireless speakers, etc. Playing ...
Page 58 - Playing Back
58 Playback Playing Back 1. Do the play operations on the AV component connected to this unit. Do the play operations on this unit when the input is TUNER or NET. • If "Variable" has been selected for the "Output Level", the volume can be adjusted on this unit. Adjust to a suitable v...
Page 59 - Tuning into a Radio Station; Tuning Automatically; When FM broadcasts reception is poor:
59 Playback Listening To the Radio You can receive AM/FM radio stations on this unit with the built-in tuner. Listening To the AM/FM Radio Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1. Press TUNER repeatedly to select either "AM" ...
Page 60 - Tuning Manually; ENTER; Frequency step setting; Presetting a Radio Station (
60 Playback Tuning Manually Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. 1. Press TUNER repeatedly to select either "AM" or "FM". 2. Press MODE repeatedly to display "TunMo...
Page 61 - Registration Procedure; Selecting a Preset Radio Station
61 Playback Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite radio stations.After tuning in to the radio station you want to register, perform the following procedure. 1. Press MEMORY so that the preset number on the display blinks. 2. While the preset num...
Page 63 - Checking the input format and listening mode
63 Playback Checking the input format and listening mode Repeatedly pressing the button on the remote controller switches the display of the main unit in the following order. • The content displayed depends on the source, BLUETOOTH, etc., being played. • Not all the information is necessarily displa...
Page 64 - Quick Menu
64 Playback Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc.You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu. Quick MenuHDMIAudioRoomEQLevel HDMI OutA/V SyncAudio Return Channe...
Page 65 - HDMI; Audio Return Channel:; Audio; RoomEQ; Level
65 Playback HDMI HDMI Out: Select the HDMI OUT jack to output video signals from "MAIN", "SUB", and "MAIN+SUB". A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. The setting can be set for each input. • It cannot be set if the listening ...
Page 70 - Registering this unit with an Amazon; Amazon Alexa
70 Playback Alexa is a cloud-based voice service developed by Amazon. When this unit is registered with an Amazon account, you can use a terminal with Amazon Alexa (an Amazon Echo, etc.) or Amazon Alexa App (available on iOS and Android™) to perform operations such as adjusting the volume of this un...
Page 72 - Registering This Unit with Amazon Music
72 Playback Amazon Music Registering this unit with Amazon Music allows you to enjoy the music distribution service provided by Amazon. • To play Amazon Music, you need to have your Amazon account and sign up for Amazon Prime or Amazon Music Unlimited. For more information, see the Amazon website. A...
Page 73 - Playing Amazon Music using the remote
73 Playback Playing Amazon Music using the Onkyo Controller 1. Start up Onkyo Controller. This unit is automatically displayed after startup. Then, tap and select this unit displayed. 2. Tap "NET" or "NETWORK" on the upper part of the screen to switch to the network screen. Then tap ...
Page 74 - Registering this unit with TIDAL; Playing TIDAL
74 Playback Registering this unit with TIDAL allows you to enjoy the music distribution service provided by TIDAL. You can register this unit on the screen of Onkyo Controller by downloading Onkyo Controller (available on iOS or Android™) to mobile devices such as a smartphone and tablet. • You need...
Page 78 - Internet Radio Service Menu
78 Playback Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing ENTER wi...
Page 79 - Setting the video source to be displayed on TV beforehand:
79 Playback Playing different audio and video Displaying Your Favorite Video on TV While Playing Music While listening to the music from a CD or BLUETOOTH enabled device, you can display video on TV from an AV component such as a Blu-ray Disc player. • For audio playback, you can select an input sel...
Page 80 - Supported Audio Formats; USB Storage Device Requirements; Playing music files saved on a USB storage
80 Playback USB Storage Device You can play music files stored on a USB storage device. Supported Audio Formats MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer 3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR WMA (.wma) • 44.1 kHz, 48 kHz/Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossle...
Page 83 - Windows Media
83 Playback Music Server Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers this unit is compatible with are those PCs with players installed that have the server functionality of Windows Media ® Player 12, or NAS...
Page 85 - Searching music files to select; Controlling Remote Playback from a PC; Remote playback
85 Playback 6. Select the target server with the cursors, and press ENTER to display the items list screen. • This unit cannot access pictures and videos stored on servers. • Depending on the server sharing settings, contents stored on the server may not be displayed. 7. With the cursors, select the...
Page 86 - Sort and Delete
86 Playback Play Queue When downloading Onkyo Controller (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can save your favorite playlist (Play Queue information) among music files stored in the USB storage device connected to this unit and music files stored in...
Page 88 - Transmitter
88 Playback Connecting a transmitter for playback When you connect wireless headphones or a wireless speaker transmitter to the ZONE B PRE/LINE OUT terminal of this unit, you can play back the same source through the wireless headphones or wireless speakers as in the main room. Connections 1. Use an...
Page 90 - Digital Audio Input
90 Setup Setup Menu Menu list 1. Input/Output Assign 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. p92 2. HDMI Input You can change input assignment between the input selectors and HDMI IN jacks. p94 3. Digital Audio Input Change input assignment bet...
Page 91 - Audio Select
91 Setup 4. Source 1. My Input Volume Set a volume value for each input selector. p103 2. Name Edit Set an easy name for each input. p103 Audio Select Select the prioritized input terminal when multiple audio sources are connected to one input selector. p103 Video Select When "TUNER", "N...
Page 93 - HDMI 4K/8K Signal Format
93 Setup Setup 1. Input/Output Assign HDMI 4K/8K Signal Format Set the 4K/8K signal format input and output by this unit. Set to suit the TV or player connected. • For resolutions supported by this unit, refer to "Supported input resolutions" ( → p154 ). BD/DVD (Default Value: 4K Enhanced)...
Page 95 - Analog Audio Input
95 Setup Setup 1. Input/Output Assign 3. Digital Audio Input Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---". BD/DVD (Default Value: ---) GAME (Default Value: ---) CBL/SAT (Default Value: ---) STRM BOX (D...
Page 97 - Front
97 Setup Setup 2. Speaker 2. Crossover Change the settings of crossover frequencies. Front (Default Value: 100 Hz) Center (Default Value: 100 Hz) Height (Default Value: 100 Hz) Surround (Default Value: 100 Hz) Surround Back (Default Value: 100 Hz) LPF of LFE (Default Value: 120 Hz) Double Bass (...
Page 99 - Dolby Enabled Speaker; Equalizer Settings
99 Setup Setup 2. Speaker 5. Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. • This setting can be selected when "Configuration" - "Height Speaker" is set to "Dolby Speaker". Distance from the ceiling (Default Value: 6.0 ft/1.80 m) Set the distance be...
Page 100 - Speaker Virtualizer
100 Setup Setup 2. Speaker 7. Speaker Virtualizer The Speaker Virtualizer function can be switched between On and Off. Speaker Virtualizer (Default Value: On) On Listening modes such as T-D that have virtual speaker effects can be selected. Off Listening modes such as T-D that have virtual speak...
Page 104 - Video Select
104 Setup Setup 4. Source Analog When giving priority to the input signal from AUDIO IN jacks • This item can be selected only when the input to be set is assigned to the AUDIO IN jack in the "1. Input/Output Assign" - "Analog Audio Input" setting. PCM Fixed Mode (Default Value: Of...
Page 116 - Device Information; Network Setting
116 Setup Web Setup Menu operations You can make the settings for the network function of this unit using an Internet browser on a PC, smartphone, etc.1. Press on the remote controller to display the Setup menu. 2. Select "5. Hardware" - "Network" with the cursors, and then take a no...
Page 118 - Network Connection
118 Setup Network Connection 1. A confirmation screen asking you whether to agree to the privacy statement is displayed during network setting. If you agree, select "Accept" and press ENTER. 2. Select the type of connection to the network. To use the Chromecast built-in function to connect...
Page 119 - AccuEQ Room Calibration; SETUP MIC
119 Setup press ENTER. 2. ARC Setup If you have connected a TV that supports ARC, select "Yes" and press ENTER. 3. AccuEQ Room Calibration Place the supplied speaker setup microphone at the listening position. The unit automatically measures the test tones output from each speaker, and s...
Page 120 - Initial Setup
120 Setup Onkyo Controller (available on iOS and Android™ handsets) is a dedicated app available for free which allows you to use your handset as a remote controller. Along with basic operations such as switching input and adjusting the volume, you can also select a radio station or network service ...
Page 121 - When the unit is operating erratically; ZONE B function
Troubleshooting 121 Troubleshooting Troubleshooting When the unit is operating erratically 123 Try restarting the unit 123 Resetting the unit (this resets the unit settings to the default) 123 Troubleshooting 124 Power 124 Audio 124 Listening Modes 126 Video 127 Linked operation 128 Tune...
Page 123 - Try restarting the unit
123 Troubleshooting When the unit is operating erratically Try restarting the unit Restarting this unit may solve the problem. Set the main unit to standby, then after waiting for 5 seconds or more, press and hold the ON/STANDBY button of the main unit for at least 5 seconds, and then restart the ...
Page 124 - Power; The unit turns off unexpectedly; WARNING
124 Troubleshooting Troubleshooting Power When the power is turned on, "AMP Diag Mode" appears on the display of the main unit • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main...
Page 125 - No sound from the TV; The subwoofer produces no sound
125 Troubleshooting No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV does not support the ARC function, along with the connection by an HDMI cable, connect the TV and this unit using a digital optical cable. ( →...
Page 126 - Noise can be heard; Sound suddenly changes; Listening Modes; Cannot select a desired listening mode
126 Troubleshooting Noise can be heard • Using cable ties to bundle audio pin cables, power cords, speaker cables, etc. may degrade the audio quality. Do not bundle the cords. • An audio cable may be picking up interference. Change the position of the cables. The beginning of audio received by a...
Page 127 - About Dolby signals; About DTS signals; Video; No image appears
127 Troubleshooting About Dolby signals • When surround back speakers are included in the speaker layout, and software that is recorded with the 5.1-channel Dolby audio format is played, the surround channel audio may be output from the surround back speakers. • Some Dolby Atmos audio format that ...
Page 128 - No image from a device connected to HDMI IN jack; Images flicker; Linked operation
128 Troubleshooting No image from a device connected to HDMI IN jack • To display video from the connected player on the TV while the unit is in standby, you need to enable "5. Hardware" - "HDMI" - "HDMI Standby Through" on the Setup menu. For details of the HDMI Standby Th...
Page 129 - Tuner; Poor reception or much noise; BLUETOOTH function; unit
129 Troubleshooting Tuner Poor reception or much noise • Recheck the antenna connection. • Move the antenna away from the speaker cord or power cord. • Move the unit away from your TV or PC. • Passing cars or airplanes in the vicinity can cause interference. • If radio waves are blocked by concr...
Page 130 - Sound is interrupted
130 Troubleshooting Cannot transmit from this unit to a Bluetooth wireless technology enabled device (wireless headphones, etc.) • Check that the "Bluetooth Transmitter" setting on this unit is set to either "On(Tx)" or "On(Main + Tx)". ( → p110 ) Cannot connect this unit...
Page 131 - Network function; Cannot access the Internet radio
131 Troubleshooting Network function • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. • When the NET indicator is blinking, this unit is not properly connected to the home network. • Unplug and plug the power cords...
Page 132 - USB storage device; USB storage device is not displayed; Wireless LAN Network; Cannot access wireless LAN network; Connected to an SSID different from the selected SSID
132 Troubleshooting USB storage device USB storage device is not displayed • Check if the USB storage device or USB cable is securely inserted to the USB port of the unit. • Disconnect the USB storage device once from the unit, and then reconnect it. • Performance of the hard disk that receive p...
Page 133 - Playback sound is interrupted, or communication is not possible; The display does not light up
133 Troubleshooting Playback sound is interrupted, or communication is not possible • You may not receive radio waves due to poor radio wave conditions. Shorten the distance from the wireless LAN router, or remove obstacles to improve visibility, and connect again. Install the unit away from micro...
Page 134 - Others; Strange noise can be heard from the unit
134 Troubleshooting Others Strange noise can be heard from the unit • If you have connected another device to the same outlet as this unit, strange noise may occur under the influence of the device. If the symptom is remedied by removing the power plug of the other device from the outlet, use di...
Page 135 - Appendix; Speaker Layouts and Selectable Listening Modes; Appendix
Appendix 135 Appendix Speaker Layouts and Selectable Listening Modes 136 LISTENING MODE buttons and Selectable Listening Modes 139 Input Formats and Selectable Listening Modes 141 Listening Mode Effects 145 Speaker combinations 150 General Specifications 151 Appendix
Page 136 - Listening mode
136 Appendix Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Speaker layout (ch) Listening mode 2.1 3.1 4.1 5.1 6.1 7.1 2.1.2 3.1.2 4.1.2 5.1.2 DD (Dolby Audio - DD) (*1) (*1) (*1) (*2) (*2) (*3) (*3) (*3) DD+ (Dolby Audi...
Page 140 - LISTENING MODE buttons
140 Appendix LISTENING MODE buttons Listening mode MOVIE/TV MUSIC GAME OrchestraUnpluggedStudio-MixTV LogicUnpluggedGame-RPGGame-ActionGame-RockGame-SportsAllCh StereoMono MusicT-D (Theater-Dimensional)
Page 144 - Speaker Layouts and Selectable Listening
144 Appendix (*1) You cannot select any mode other than Pure Audio, Direct, Stereo, AllCh Stereo and Mono Music if the sampling rate is 5.6/11.2 MHz. (*2) A center speaker or surround speakers need to be installed. (*3) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD...
Page 145 - In alphabetical order; AllCh Stereo
145 Appendix Listening Mode Effects In alphabetical order AllCh Stereo This mode is ideal for background music. Stereo sound is played through the surround speakers as well as the front speakers, creating a stereo image. Atmos Since this mode calculates the positional data of audio recorded in D...
Page 146 - Direct
146 Appendix Direct This listening mode can be selected for all input signals. Processing that affects sound quality is shut down, and sound closer to the original is reproduced. The sound is reproduced with the sound field based on the number of channels in the input signal. For example, a 2 ch s...
Page 147 - DTS Express
147 Appendix DTS 96/24 This mode faithfully reproduces the sound design recorded in the DTS 96/24 audio format. The DTS 96/24 format is an optional audio format for DVD-Video and Blu-ray Discs. It enables recording of 5.1 channels; two front channels, one center channel, two surround channels, and...
Page 148 - Mono; Stereo
148 Appendix ES Discrete (DTS-ES Discrete) This mode faithfully reproduces the sound design recorded in the DTS-ES Discrete audio format. DTS-ES Discrete is an optional audio format based on 5.1 ch for DVD-Video and Blu-ray Discs. It is possible to record a maximum of 6.1 channels with a monaural ...
Page 149 - TV Logic
149 Appendix T-D (Theater-Dimensional) In this mode, you can enjoy a virtual playback of multichannel surround sound even with only two or three speakers. This works by controlling how sounds reach the listener’s left and right ears. • This mode cannot be selected when "Speaker Virtualizer"...
Page 151 - Amplifier Section
151 Appendix General Specifications Amplifier Section Rated Output Power With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. (FTC) Maximum Effective Output Powe...
Page 152 - Tuner Section
152 Appendix Tuner Section FM Tuning Frequency Range 87.5 MHz - 107.9 MHz 50 dB quieting sensitivity (FM MONO) 1.0 μV, 11.2 dBf (IHF, 1 kHz, 100% MOD) AM Tuning Frequency Range 530 kHz - 1710 kHz Preset Channel 40 BLUETOOTH Section Communication system BLUETOOTH Specification version 4.2 Frequency b...
Page 155 - Network Section
155 Appendix • Signals are output from the HDMI OUT jack of this unit to the TV with the same resolution as the input resolution. When a TV supporting 4K is used, HDMI video signals with 1080p can be output with 4K. For linked functions to work properly, do not connect CEC-compliant devices exceedin...
Page 156 - USB Section; General
156 Appendix USB Section USB 1 (Rear : Ver.2.0, 5V/1 A) ■ USB Storage Device ( → p80 ) Supported Audio Formats MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR WMA (.wma) • 44.1 kHz, 48 kHz/Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossles...
Page 157 - Video Section
157 Appendix Standby mode (ALL ON) 1.7 W Equipment with HiNA functionality Standby mode, Network disconnect and Network Standby ON 2.6 W This equipment complies with European Commission Regulation (EC) No 1275/2008 as equipment with HiNA functionality. If you do not to use the Network function, plea...
Page 158 - Audio Outputs; License and Trademark
158 Appendix Audio Outputs Analog PRE/LINE OUT (ZONE B) × 1 PRE OUT (SUBWOOFER) × 2 Speaker Outputs 7 (FRONT L/R, CENTER, SURROUND L/R, HEIGHT L/R or SURROUND BACK L/R or ZONE B L/R) • FRONT L/R terminals support banana plugs. Phones 1 (ø 6.3 mm, 1/4") Others Setup Mic 1 (Front) RS-232 None 12V ...
