Omron M1 Plus- Manuals

5 1.Overview EN 1. Overview Main unit A. DisplayB. SET buttonC. Air connectorD. MEMORY buttonE. I/O button F. Battery compartment B A C C E D F

6 1.Overview Arm Cuff If air starts to leak from the arm cuff, please replace with a new one. (Refer to Chapter 7 “Optional Parts”) Inflation Bulb G. Arm cuff (Medium cuff: arm circumference 22-32 cm) H. Air Tube I. Air Release Button J. Air TubeK. Air Inflation Bulb H G J K I

7 1.Overview EN Display Package contents L. Systolic blood pressureM. Diastolic blood pressureN. Memory symbol (Displayed when viewing values stored in memory) O. Average value symbol (Displayed when viewing average value for the last three measurements) P. Buzzer symbolQ. Battery low symbol R. Hear...

8 2.Preparation 2. Preparation 2.1 Installing/Replacing the Batteries 1. Turn the main unit upside down. 2. Slide the battery cover in the direction of the arrow while pressing the ribbed part of the cover. 3. Install or replace four “ AAA ” size batteries so that the + (positive) and - (negative) p...

9 2.Preparation EN Battery Life & Replacement If the battery low symbol ( ) appears on the display, replace all four batteries at the same time. - When the battery low symbol ( ) starts to blink, you will still be able to use the unit for a short while. You should replace the batteries with new ...

10 2.Preparation 2.2 Setting the Date and Time Your blood pressure monitor automatically stores up to 21 measurements values, including date and time of measurement, in its memory and calculates an average value based on the three most recent measurements taken within 10 minutes of the last reading....

11 2.Preparation EN 3. Press the SET button to confirm the setting when the desired number appears on the display. The year is set and the month digits flash on the display. 4. Repeat steps 2 and 3 to set the month. The month is set and the day digits flash on the display. 5. Repeat steps 2 and 3 to...

13 2.Preparation EN 2.3 Adjusting the Settings Modes You can modify the options for the various settings of your unit. This is done by pressing the SET button to select a setting, then pressing the MEMORY button to select the options for that setting. After selecting a setting, press the I/O button ...

14 3.Using the Unit 3. Using the Unit 3.1 How to Sit Correctly When Taking a Measurement You can take a measurement on either your left or right arm. Note: • Measurements should be taken in a quiet place and you should be in a relaxed, seated position. Make sure that the room is not too hot or cold....

15 3.Using the Unit EN Notes: • Correct posture during measurement is necessary to get accurate results. • You should also try to measure your blood pressure at the same time each day. (Within 1 hour after waking up is recommended.) Incorrect Posture These situations tend to lead to higher blood pre...

16 3.Using the Unit 3.2 Applying the Arm Cuff Be sure to wrap the arm cuff correctly so that you get accurate results. Measurements can be taken in light clothing. However, please remove thick clothes, such as sweaters, before taking a reading. 1. Connect the air tube of the arm cuff and the inflati...

17 3.Using the Unit EN 3. Position the arm correctly. Taking measurements on the right arm Apply the cuff so that the air tube is at the side of your elbow.• Be careful not to rest your arm on the air tube, or otherwise restrict the flow of air to the cuff. • The cuff should be 1 to 2 cm above the e...

18 3.Using the Unit 3.3 Taking a Reading 1. Turning on the unit. Note: Press the air release button to release any air in the arm cuff. 1) Press the I/O button to turn the unit on. 2) All items in the display will be displayed briefly. The battery symbol will also be displayed for test purposes. Thi...

19 3.Using the Unit EN • The current time continues to be displayed while the cuff is being inflated. Note: Do not inflate the arm cuff more than necessary. 3. Measurement starts. Measurement starts automatically after you stop inflating the arm cuff. Decreasing numbers appear on the display and the...

22 3.Using the Unit What is Irregular Heartbeat? An irregular heartbeat is a heartbeat rhythm that varies by more than 25% from the average heartbeat rhythm detected while the unit is measuring the systolic and diastolic blood pressure.If such an irregular rhythm is detected more than twice during m...

23 3.Using the Unit EN 3.4 Using the Memory Function This unit has a memory capable of storing 21 sets of readings. Every time you complete the measurement, the unit automatically stores the blood pressure and pulse rate. If there are three readings within 10 minutes of the last reading, the average...

24 3.Using the Unit Note: If there are no measurements results stored in memory, the screen to the right is displayed. 3. Press the MEMORY button again, while the average values screen is displayed. The result from the most recent measurement is displayed. The date and time of each measurement is di...

26 4.Quick Reference Guide 4. Quick Reference Guide Use this as a quick reference guide only. If you are using this device for the first time, please read carefully Chapter 3 of this Instruction Manual.To help ensure a reliable reading, avoid eating, smoking, or exercising for at least 30 minutes be...

27 5.Handling Errors and Problems EN 5. Handling Errors and Problems 5.1 Error Messages Error Display Cause Remedy Cuff is under inflated. Press air release button and restart the measurement with a higher inflation level. Carefully read steps under section 3.3. Movement during measurement Repeat me...

29 5.Handling Errors and Problems EN 5.2 Troubleshooting Problem Cause Remedy The reading is extremely low (or high). Arm cuff not applied correctly. Apply the arm cuff correctly. Refer to section 3.2. Movement or talking during measurement. Remain still and do not talk during measurement.Refer to s...

31 6.Maintenance and Storage EN 6. Maintenance and Storage Maintenance To protect your unit from damage, please observe the following: • Do not subject the main unit and cuff to extreme temperatures, humidity, moisture or direct sunlight. • Do not fold the cuff or tubing tightly.• Do not inflate the...

32 6.Maintenance and Storage Calibration and Service • The accuracy of this blood pressure monitor has been carefully tested and is designed for a long service life. • It is generally recommended to have the unit inspected every two years to ensure correct functioning and accuracy. Please consult yo...

33 6.Maintenance and Storage EN Storage Keep the unit in its storage case when not in use. 1. Unplug the air tube from the air connector. 2. Gently fold the air tube into the arm cuff. Note: Do not bend the air tube excessively. 3. Place the arm cuff, inflation bulb and main unit in the storage case...

34 7.Optional Parts 7. Optional Parts Medium Arm Cuffs Arm circumference 22 - 32 cm Large Arm Cuff Arm circumference 32 - 42 cm Small Arm Cuff Arm circumference 17 - 22 cm Small cuff and bulb combination Arm circumference 17 - 22 cm Regular bulb CM1-7935058-8 CM-4997086-7 CL-4997065-4 CS-4997076-0 4...

35 8.Technical Data EN 8. Technical Data Note: Subject to technical modification without prior notice • This OMRON product is produced under the strict quality system of OMRON Healthcare Co. Ltd., Japan. The Core component for OMRON blood pressure monitors, which is the Pressure Sensor, is produced ...

37 9.Some Useful Information about Blood Pressure EN 9. Some Useful Information about Blood Pressure What is Blood Pressure? Blood pressure is a measure of the force of blood flowing against the walls of the arteries. Arterial blood pressure is constantly changing during the course of the heart’s cy...

5 1.Overview EN 1. Overview Main unit A. DisplayB. SET buttonC. Air connectorD. MEMORY buttonE. I/O button F. Battery compartment B A C C E D F

6 1.Overview Arm Cuff If air starts to leak from the arm cuff, please replace with a new one. (Refer to Chapter 7 “Optional Parts”) Inflation Bulb G. Arm cuff (Medium cuff: arm circumference 22-32 cm) H. Air Tube I. Air Release Button J. Air TubeK. Air Inflation Bulb H G J K I

7 1.Overview EN Display Package contents L. Systolic blood pressureM. Diastolic blood pressureN. Memory symbol (Displayed when viewing values stored in memory) O. Average value symbol (Displayed when viewing average value for the last three measurements) P. Buzzer symbolQ. Battery low symbol R. Hear...

8 2.Preparation 2. Preparation 2.1 Installing/Replacing the Batteries 1. Turn the main unit upside down. 2. Slide the battery cover in the direction of the arrow while pressing the ribbed part of the cover. 3. Install or replace four “ AAA ” size batteries so that the + (positive) and - (negative) p...

9 2.Preparation EN Battery Life & Replacement If the battery low symbol ( ) appears on the display, replace all four batteries at the same time. - When the battery low symbol ( ) starts to blink, you will still be able to use the unit for a short while. You should replace the batteries with new ...

10 2.Preparation 2.2 Setting the Date and Time Your blood pressure monitor automatically stores up to 21 measurements values, including date and time of measurement, in its memory and calculates an average value based on the three most recent measurements taken within 10 minutes of the last reading....

11 2.Preparation EN 3. Press the SET button to confirm the setting when the desired number appears on the display. The year is set and the month digits flash on the display. 4. Repeat steps 2 and 3 to set the month. The month is set and the day digits flash on the display. 5. Repeat steps 2 and 3 to...

13 2.Preparation EN 2.3 Adjusting the Settings Modes You can modify the options for the various settings of your unit. This is done by pressing the SET button to select a setting, then pressing the MEMORY button to select the options for that setting. After selecting a setting, press the I/O button ...

14 3.Using the Unit 3. Using the Unit 3.1 How to Sit Correctly When Taking a Measurement You can take a measurement on either your left or right arm. Note: • Measurements should be taken in a quiet place and you should be in a relaxed, seated position. Make sure that the room is not too hot or cold....

15 3.Using the Unit EN Notes: • Correct posture during measurement is necessary to get accurate results. • You should also try to measure your blood pressure at the same time each day. (Within 1 hour after waking up is recommended.) Incorrect Posture These situations tend to lead to higher blood pre...

16 3.Using the Unit 3.2 Applying the Arm Cuff Be sure to wrap the arm cuff correctly so that you get accurate results. Measurements can be taken in light clothing. However, please remove thick clothes, such as sweaters, before taking a reading. 1. Connect the air tube of the arm cuff and the inflati...

17 3.Using the Unit EN 3. Position the arm correctly. Taking measurements on the right arm Apply the cuff so that the air tube is at the side of your elbow.• Be careful not to rest your arm on the air tube, or otherwise restrict the flow of air to the cuff. • The cuff should be 1 to 2 cm above the e...

18 3.Using the Unit 3.3 Taking a Reading 1. Turning on the unit. Note: Press the air release button to release any air in the arm cuff. 1) Press the I/O button to turn the unit on. 2) All items in the display will be displayed briefly. The battery symbol will also be displayed for test purposes. Thi...

19 3.Using the Unit EN • The current time continues to be displayed while the cuff is being inflated. Note: Do not inflate the arm cuff more than necessary. 3. Measurement starts. Measurement starts automatically after you stop inflating the arm cuff. Decreasing numbers appear on the display and the...

22 3.Using the Unit What is Irregular Heartbeat? An irregular heartbeat is a heartbeat rhythm that varies by more than 25% from the average heartbeat rhythm detected while the unit is measuring the systolic and diastolic blood pressure.If such an irregular rhythm is detected more than twice during m...

23 3.Using the Unit EN 3.4 Using the Memory Function This unit has a memory capable of storing 21 sets of readings. Every time you complete the measurement, the unit automatically stores the blood pressure and pulse rate. If there are three readings within 10 minutes of the last reading, the average...

24 3.Using the Unit Note: If there are no measurements results stored in memory, the screen to the right is displayed. 3. Press the MEMORY button again, while the average values screen is displayed. The result from the most recent measurement is displayed. The date and time of each measurement is di...

26 4.Quick Reference Guide 4. Quick Reference Guide Use this as a quick reference guide only. If you are using this device for the first time, please read carefully Chapter 3 of this Instruction Manual.To help ensure a reliable reading, avoid eating, smoking, or exercising for at least 30 minutes be...

27 5.Handling Errors and Problems EN 5. Handling Errors and Problems 5.1 Error Messages Error Display Cause Remedy Cuff is under inflated. Press air release button and restart the measurement with a higher inflation level. Carefully read steps under section 3.3. Movement during measurement Repeat me...

29 5.Handling Errors and Problems EN 5.2 Troubleshooting Problem Cause Remedy The reading is extremely low (or high). Arm cuff not applied correctly. Apply the arm cuff correctly. Refer to section 3.2. Movement or talking during measurement. Remain still and do not talk during measurement.Refer to s...

31 6.Maintenance and Storage EN 6. Maintenance and Storage Maintenance To protect your unit from damage, please observe the following: • Do not subject the main unit and cuff to extreme temperatures, humidity, moisture or direct sunlight. • Do not fold the cuff or tubing tightly.• Do not inflate the...

32 6.Maintenance and Storage Calibration and Service • The accuracy of this blood pressure monitor has been carefully tested and is designed for a long service life. • It is generally recommended to have the unit inspected every two years to ensure correct functioning and accuracy. Please consult yo...

33 6.Maintenance and Storage EN Storage Keep the unit in its storage case when not in use. 1. Unplug the air tube from the air connector. 2. Gently fold the air tube into the arm cuff. Note: Do not bend the air tube excessively. 3. Place the arm cuff, inflation bulb and main unit in the storage case...

34 7.Optional Parts 7. Optional Parts Medium Arm Cuffs Arm circumference 22 - 32 cm Large Arm Cuff Arm circumference 32 - 42 cm Small Arm Cuff Arm circumference 17 - 22 cm Small cuff and bulb combination Arm circumference 17 - 22 cm Regular bulb CM1-7935058-8 CM-4997086-7 CL-4997065-4 CS-4997076-0 4...

35 8.Technical Data EN 8. Technical Data Note: Subject to technical modification without prior notice • This OMRON product is produced under the strict quality system of OMRON Healthcare Co. Ltd., Japan. The Core component for OMRON blood pressure monitors, which is the Pressure Sensor, is produced ...

37 9.Some Useful Information about Blood Pressure EN 9. Some Useful Information about Blood Pressure What is Blood Pressure? Blood pressure is a measure of the force of blood flowing against the walls of the arteries. Arterial blood pressure is constantly changing during the course of the heart’s cy...