Omron D4BL- Manuals

Page 2 - Guard Lock Safety-door Switch; Ordering Information; List of Models; Switches; Specifications; Standards and EC Directives

A-68 Guard Lock Safety-door Switch D4BL D4BL Safe ty Do or Sw it c h e s Ordering Information ■ List of Models Switches Operation Keys (Order Separately) Specifications ■ Standards and EC Directives • Conforms to the following EC Directives:Machinery DirectiveLow Voltage DirectiveEN1088 ■ Approved S...

Page 3 - Approved Standard Ratings; Characteristics

Guard Lock Safety-door Switch D4BL A-69 D4BL Safe ty Do or Sw it c h e s ■ Approved Standard Ratings TÜV (EN60947-5-1), CCC (GB14048.5) Use a 10-A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device. UL/CSA (UL508, CSA C22.2 No. 14) A300 Note: The UL/CSA approved rating...

Page 4 - Solenoid Coil Characteristics; Connections; Contact Form 2NC + 2NC; Dimensions

A-70 Guard Lock Safety-door Switch D4BL D4BL Safe ty Do or Sw it c h e s Solenoid Coil Characteristics Indicator Characteristics Connections ■ Contact Form (Diagrams Show State with Key Inserted and Lock Engaged) Note: The EN-approved direct opening mechanism is indicated by on the Switch. ■ Contact...

Page 5 - Circuit Connection Example

Guard Lock Safety-door Switch D4BL A-71 D4BL Safe ty Do or Sw it c h e s ■ Circuit Connection Example • Terminals 11 and 32 are connected internally and so connect terminals 12 and 31 for safety-circuit input. (GS-ET-19). • When using indicators, connect them to the auxiliary circuit side (monitor c...

Page 6 - Connection Example with OMRON’s G9SA Safety Relay Unit

A-72 Guard Lock Safety-door Switch D4BL D4BL Safe ty Do or Sw it c h e s ■ Connection Example with OMRON’s G9SA Safety Relay Unit G9SA-321-T @ (24 VAC/VDC) + D4BL- @ A- @ , @ B- @ (Mechanical Lock Type) Circuit Diagram (Manual Reset) Timing Chart Motor rotation OFF-delay time S1: Safety Limit Switch...

Page 8 - Nomenclature

A-74 Guard Lock Safety-door Switch D4BL D4BL Safe ty Do or Sw it c h e s Nomenclature D4BL- @ C @@ - @ D4BL- @ D @@ - @ Operation Key Lock plate Rotating drum Operation plunger Seal ring (NBR)Auxiliary plungerSeal packing (NBR)Rotating lever Safety switch Seal packing (NBR) Ground terminal M3.5 Sole...

Page 10 - Operation Keys; Horizontal Mounting

A-76 Guard Lock Safety-door Switch D4BL D4BL Safe ty Do or Sw it c h e s ■ Operation Keys 78.7 20 ± 0.15 12 40.7 25.8 15.6 7.3 15 5.3 5.3 36 11.8 5.6 2.6 7.5 20 53.7 13 40 ± 0.15 52.4 15.6 25.8 11.8 5.6 36 2.6 5.3 11.9 7.5 20 5.3 x 7.3 long mounting hole 4 dia. 4 dia. Two, 2.65R Horizontal Mounting ...

Page 11 - With Operation Key Inserted

Guard Lock Safety-door Switch D4BL A-77 D4BL Safe ty Do or Sw it c h e s ■ With Operation Key Inserted Note: 1. Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions. 2. In the above diagrams, the Operation Key is inserted from the front. (30 ± 0.15) (41) (40) (35) (41) (41) ...

Page 12 - Safety Precautions; CAUTION; Precautions for Safe Use; Stopper Installation; Precautions for Correct Use; Tightening Torque

A-78 Guard Lock Safety-door Switch D4BL D4BL Safe ty Do or Sw it c h e s Safety Precautions Refer to the “Precautions for All Switches” on page I-2 and “Precautions for All Safety Door Switches” on page A-2. ! CAUTION ■ Precautions for Safe Use • Do not use the Switch submersed in oil or water or in...

Page 13 - Switch Mounting Dimensions; Head Bottom View

Guard Lock Safety-door Switch D4BL A-79 D4BL Safe ty Do or Sw it c h e s Solenoid Lock Models The solenoid lock locks the door only when power is supplied to thesolenoid. Therefore, the door will be unlocked if the power supply tothe solenoid stops. Therefore, do not use solenoid lock models formach...

Page 14 - Mounting the Cover; Processing and Connecting Cable/Conduit; Cable Connection Example; Normal Positions of Rotating Lever and Plunger

A-80 Guard Lock Safety-door Switch D4BL D4BL Safe ty Do or Sw it c h e s Be sure to check the mechanical lock and solenoid release functions when mounting the D4BL. If the head direction is changed, recheck the tightening torque of each of screw. Make sure that no foreign materials will enter throug...

Page 15 - Terms and Conditions of Sale; Certain Precautions on Specifications and Use

Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemedpar t of all quotes, agreements, purchase orders, acknowledgments, price lists,catalogs, manuals, brochures and other documents, whether electronic or inwriting, relating to the sale of pr...

Page 16 - DWZZZRPURQFRPRHL

2052121/,1( *OREDOKWWSZZZRPURQFRP 86$KWWSZZZRPURQFRPRHL &DQDGDKWWSZZZRPURQFD Cat. No. GC SAFETY-3 07/05 Specifications subject to change without notice Printed in USA 20521&$1$'$,1& 0LOQHU$YHQXH 7RURQWR2QWDULR0%9 20521(/(&7521,&6//& 2QH&RPPHUFH'ULYH 6FKDXPEXUJ,/ )RU86WHFK...